Panasonic Dect 6 Manual

Making a call using the shared
p
honebook
Only when 2 or more handsets are
registered to the base unit, you can
use the shared phonebook feature
during a power failure.
You should leave one handset on the
base unit for supplying the power, and
use another handset for making calls.
For the operation, please see “Finding
and calling from a phonebook entry”,
page 23. Answering calls during a
p

ower failure
n When only 1 handset is registered:
1 When the unit rings, keep the
handset on the base unit and...

Shared phonebook
T
he shared phonebook allows you to
make calls without having to dial
manually. The base unit *1
 and any
handset registered to the base unit can
use the shared phonebook. You can add
50 names and phone numbers to the
shared phonebook, and assign each
phonebook entry to the desired group.
*1 KX-TG6641 series: page 3
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group
ringer tone features (page 35). Adding entries
 Handset
1 M N
 a...

(“Friends”, “Family”, etc.) and then
s
earch for phonebook entries by group.
The group ringer tone feature is
available for Caller ID subscribers
(page 35). Changing group names
T

he default group name is  “Group 1 ”
to  “Group 9 ”.  Handset
1 M N
 a  M M
ENU N
2 Mb N:  “Group ” a  M SELECT N
3 Mb N: Select the desired group.  a
M SELECT N
4 Mb N:  “Group name ” a  M SELECT N
5 Edit the name (10 characters max.;
page 22).  a M SAVE N
6 MOFF N Finding and calling from a
p

honebook entry Scrolling...

2
Edit the name if necessary (16
characters max.; page 22).  a M OK N
3 Edit the phone number if necessary
(24 digits max.).  a M OK N
4 Mb N: Select the desired group
(page 22).  a M SELECT N 2 times
5 MOFF N Erasing entries
Erasing an entry
 Handset
1 F

ind the desired entry (page 23).
2 MERASE N a  M b N:  “Yes ”
3 MSELECT N a  M OFF N  Base unit
*
 1
*1 KX-TG6641 series: page 3
1 Find the desired entry (page 23).
2 MERASE N a  M b N:  “Yes ”
3 M N
 a  M n N 
(EXIT) Erasing all entries
 Handset
1 M...

Speed dial
Available for:
K X-TG6631 series (page 3) You can make speed dial calls with the
b

ase unit by assigning a phone number
to each of the 3 speed dial keys ( MA N to
M C N) using the handset. Adding phone numbers to
s

peed dial keys
n By entering phone numbers:
1 MMENU N#261
2 Mb N: Select the desired speed
dial key.
3 MADD N
4 Enter the party’s name (16
characters max.).  a M OK N
5 Enter the party’s phone number
(24 digits max.).  a M OK N
6 MSELECT N a  M OFF N
n From the shared phonebook:
1...

Programmable settings
Y
ou can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a
M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the...

Sub-menu 1 Sub-menu 2 Settings Code
Greeting
Record greeting* 1
–#30239
Check greeting –#30339
Pre-recorded *
 1
(Reset to pre-recorded
greeting) –
#30439
Settings Ring count*
 1
2–7: 2 –7 rings
< 4 rings >
0:  Toll saver #211
43
Recording time *
 1
1: 1 min
3:  
0:  Greeting
only *2 #305
43
Remote code *
 1
 #30641
Screen call 1:  0:  Off #310 38
Answer on *
 1
– –#32738
Answer off *
 1
– –#32838Main menu:   “
V
.M. access ” (V.M.: Voice mail)Operation Code
Listening to voice mail messages.
#33046Main...

Main menu:   “
Initial setting ”Sub-menu 1 Sub-menu 2 Settings Code
Ringer setting
Ringer volume*
 4
(Handset) 0–6: 
Off–6  #16017
Ringer tone *
 5, *6, *7
(Handset) 1–5:
 Tone 1 –5
< Tone 1 >
6–0:  Melody
1 –5 #161
–
Silent mode
– O

n/Off 1:
 On  0:   #238 31
Silent mode
– S

tart/End <
11:00 PM/06:
00 AM > #237
31
Set date & time Date and time*
 1
–#10114
Alarm 1: O
nce
2:  Daily
0:   #720
31
Time adjustment *
 1, *3
1: 
0:  Manual #226
–
Talking Caller
I
 D Handset
1:  0:  Off #162 34
Base unit *
 1...

Sub-menu 1 Sub-menu 2 Settings Code
Set tel line
Set dial mode* 1
1: Pulse
2:   #120
14
Set flash time *
 1, *13
0: 900 ms
1:  
2:  600 ms
3:  400 ms
4:  300 ms
5:  250 ms
G : 200 ms
#:  160 ms
6:  110 ms
7:  100 ms
8:  90 ms
9:  80 ms #121
18
Set line mode *
 1, *14
1: A  2:   #122 –
Call sharing *
 1
–1:  0:  Off #194 19
Registration Register handset –#13033
Deregistration *
 2
–#13133
Power failure –1:  0:   Off #152 19
Change language Display (
Handset) 1: 
 
2:  Español #110
14
Voice prompt *
 1
1:...

*6 If you select one of the melody ringer tones, the ringer tone continues to play for
s everal seconds even if the caller has already hung up. You may either hear a
dial tone or no one on the line when you answer the call.
*7 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
*8 KX-TG6631 series: page 3
*9 KX-TG6641 series base unit You can adjust the contrast of the base unit display by performing the following
operation. 
MDISPLAY N a  M b N:  “Contrast ” a...