Home
>
Panasonic
>
Camera Accessories
>
Panasonic Data Multiplex Unit Wj Mp204c Operating Instructions
Panasonic Data Multiplex Unit Wj Mp204c Operating Instructions
Have a look at the manual Panasonic Data Multiplex Unit Wj Mp204c Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 22
22
8Alarm mode setup
1. Move the cursor to ALARM MODE to select ON or OFF
with the [–] or [+] button, then press SET. The default
setting is ON.
ON :Opens a submenu shown below.
OFF:Alarm mode is disabled.
The ALARM MODE sub menu appears.
1-1. Move the cursor to MONITOR SPOT to select ON or
OFF with the [–] or [+] button, then press SET. The
default setting is ON .
This setting specifies whether to change the monitor
image when an alarm operates.
ON :Image display on the monitor changes to that
of the...](http://img.usermanuals.tech/thumb/58/69458/w64_wj-mp204c_en_om_d-21.png "Page 22
22
8Alarm mode setup
1. Move the cursor to ALARM MODE to select ON or OFF
with the [–] or [+] button, then press SET. The default
setting is ON.
ON :Opens a submenu shown below.
OFF:Alarm mode is disabled.
The ALARM MODE sub menu appears.
1-1. Move the cursor to MONITOR SPOT to select ON or
OFF with the [–] or [+] button, then press SET. The
default setting is ON .
This setting specifies whether to change the monitor
image when an alarm operates.
ON :Image display on the monitor changes to that
of the...")
![Page 23
23
8Cable compensation/VD2 sync/data setup
The COMP/VD2/DATA menu is displayed when you select it
in the SYSTEM menu.
In this menu, each camera is set up for cable compensa-
tion, VD2 sync and data communication ON/OFF.
1. Move the cursor to CAMERA IN. Select a camera input
channel with the [–] or [+] button. The default setting is
1CH.
The camera channel to be set up is selected and the
image of the channel is displayed in the background of
the setup menu.
Available channels:1CH, 2CH, 3CH, 4CH
2. Move...](http://img.usermanuals.tech/thumb/58/69458/w64_wj-mp204c_en_om_d-22.png "Page 23
23
8Cable compensation/VD2 sync/data setup
The COMP/VD2/DATA menu is displayed when you select it
in the SYSTEM menu.
In this menu, each camera is set up for cable compensa-
tion, VD2 sync and data communication ON/OFF.
1. Move the cursor to CAMERA IN. Select a camera input
channel with the [–] or [+] button. The default setting is
1CH.
The camera channel to be set up is selected and the
image of the channel is displayed in the background of
the setup menu.
Available channels:1CH, 2CH, 3CH, 4CH
2. Move...")
![Page 24
24
8Camera Configuration
The CAMERA CONFIG menu is displayed when you select
it in the SYSTEM menu.
When more than one unit are used, each camera input is
given a camera number in this menu.
1. Move the cursor to CAM NO. Select a number with the
[–] or [+] button. The default setting is that both CAM-
ERA IN and CAM NO. are given the same number.
Available numbers:1-128 and – (not connected)
2. Repeat the above step until all CAMERA IN are
assigned numbers.
3. Press ESC to return to the SYSTEM menu....](http://img.usermanuals.tech/thumb/58/69458/w64_wj-mp204c_en_om_d-23.png "Page 24
24
8Camera Configuration
The CAMERA CONFIG menu is displayed when you select
it in the SYSTEM menu.
When more than one unit are used, each camera input is
given a camera number in this menu.
1. Move the cursor to CAM NO. Select a number with the
[–] or [+] button. The default setting is that both CAM-
ERA IN and CAM NO. are given the same number.
Available numbers:1-128 and – (not connected)
2. Repeat the above step until all CAMERA IN are
assigned numbers.
3. Press ESC to return to the SYSTEM menu....")
![Page 25
25
8CAM ADDRESS
Camera addresses are assigned to each of the units cam-
era input.
1. Move the cursor to CAM ADDRESS , then press
SET. The CAM ADDRESS window appears.
2. Specify a number with the [–] or [+] button. The default
setting is 1.
Available numbers:1-99, – (no assignment)
Note:This setting takes effect only when the UNIT
switch is set to 0 on the front panel.
3. Repeat the above step until all camera inputs are given
addresses.
4. Press ESC to return to the communication setup.
8BAUD RATE
1....](http://img.usermanuals.tech/thumb/58/69458/w64_wj-mp204c_en_om_d-24.png "Page 25
25
8CAM ADDRESS
Camera addresses are assigned to each of the units cam-
era input.
1. Move the cursor to CAM ADDRESS , then press
SET. The CAM ADDRESS window appears.
2. Specify a number with the [–] or [+] button. The default
setting is 1.
Available numbers:1-99, – (no assignment)
Note:This setting takes effect only when the UNIT
switch is set to 0 on the front panel.
3. Repeat the above step until all camera inputs are given
addresses.
4. Press ESC to return to the communication setup.
8BAUD RATE
1....")
![Page 26
26
The ALARM MODE sub menu appears.
1. Move the cursor to MONITOR SPOT to select ON or
OFF with the [–] or [+] button. The default setting is ON.
This setting specifies whether to change the monitoring
image when an alarm operates.
ON:The image displayed on the monitor screen
changes to that of the alarm activated channel.
OFF:The image displayed will not change even when
an alarm operates.
2. Move the cursor to ALARM DISPLAY. Select ON or OFF
with the [–] or [+] button. The default setting is ON.
Alarm...](http://img.usermanuals.tech/thumb/58/69458/w64_wj-mp204c_en_om_d-25.png "Page 26
26
The ALARM MODE sub menu appears.
1. Move the cursor to MONITOR SPOT to select ON or
OFF with the [–] or [+] button. The default setting is ON.
This setting specifies whether to change the monitoring
image when an alarm operates.
ON:The image displayed on the monitor screen
changes to that of the alarm activated channel.
OFF:The image displayed will not change even when
an alarm operates.
2. Move the cursor to ALARM DISPLAY. Select ON or OFF
with the [–] or [+] button. The default setting is ON.
Alarm...")
![Page 27
27
2. Move the cursor to COMP. Select a parameter with the
[–] or [+] button. The default setting is S.
The longer a coaxial cable is extended, the more the
video signals attenuate. This setting is to compensate
signal attenuation in 3 degrees. Select the best para-
meter that optimizes the displayed image on the moni-
tor while observing it.
S:Short distance of less than 1 300 ft (400 m)
M:Medium distance between 1 300 ft (400 m) and 2
300 ft (700 m)
L:Long distance of less than 3 000 ft (900 m)...](http://img.usermanuals.tech/thumb/58/69458/w64_wj-mp204c_en_om_d-26.png "Page 27
27
2. Move the cursor to COMP. Select a parameter with the
[–] or [+] button. The default setting is S.
The longer a coaxial cable is extended, the more the
video signals attenuate. This setting is to compensate
signal attenuation in 3 degrees. Select the best para-
meter that optimizes the displayed image on the moni-
tor while observing it.
S:Short distance of less than 1 300 ft (400 m)
M:Medium distance between 1 300 ft (400 m) and 2
300 ft (700 m)
L:Long distance of less than 3 000 ft (900 m)...")
![Page 30
30
SPECIFICATIONS
Power Source : 120 V AC 60 Hz
Power Consumption : 7 W
Camera Input : 1 V[p-p]/75 Ω x 4
Spot Input : 1 V[p-p]/75 Ω x 1
VS/VD Input : VS (1 V[p-p]/75 Ω), or VD (4 V[p-p]/75 Ω) x1
Camera Output : 1 V[p-p]/75 Ω(Looped through) x4
Spot Output : 1 V[p-p]/75 Ωx1 (Changeable Output from camera input or Spot input)
VS/VD Output : VS/VD IN (Looped through), or internal VD (4 V[p-p]/75 Ω) x 1
Data Communication Standard : Based on RS-485 (4-Line/2-Line*
1)
Modular Jack x 1, or 5-pin terminal x...](http://img.usermanuals.tech/thumb/58/69458/w64_wj-mp204c_en_om_d-29.png "Page 30
30
SPECIFICATIONS
Power Source : 120 V AC 60 Hz
Power Consumption : 7 W
Camera Input : 1 V[p-p]/75 Ω x 4
Spot Input : 1 V[p-p]/75 Ω x 1
VS/VD Input : VS (1 V[p-p]/75 Ω), or VD (4 V[p-p]/75 Ω) x1
Camera Output : 1 V[p-p]/75 Ω(Looped through) x4
Spot Output : 1 V[p-p]/75 Ωx1 (Changeable Output from camera input or Spot input)
VS/VD Output : VS/VD IN (Looped through), or internal VD (4 V[p-p]/75 Ω) x 1
Data Communication Standard : Based on RS-485 (4-Line/2-Line*
1)
Modular Jack x 1, or 5-pin terminal x...")
31 STANDARD ACCESSORIES Switch Protector ....................................................................... 1 pc. ALL RESET The Data Multiplex Unit WJ-MP204C can be reset to the default settings as follows: 1. Press the power switch to set it to the OFF position. 2. Press the power switch down to the ON position while pressing the camera selection buttons 2, 3, and 4. 3. Continue to press the camera selection button approximately 3 seconds after pressing the power switch down to the ON position. 4. When all indicators light up, resetting is completed. 1 Press 234
N1001-0 V8QA5877AN Printed in Japan N19 2001 © Matsushita Communication Industrial Co., Ltd. All rights reserved.Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc. Ave. 65 de Infanteria. Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 (809)750-4300 Panasonic Security and Digital Imaging Company A Division of Matsushita Electric Corporation of America Executive Office:One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838 Midwest: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5211 Western: 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840