Panasonic Cz Rd515u Operating Instructions Manual
Have a look at the manual Panasonic Cz Rd515u Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 USING THE 1-HOUR OFF TIMER 1. 1-Hour OFF Timer This function causes the unit to operate for one ho ur and then stop, regardless of whether the unit is on or off wh en this button is pressed. The indicator in the display indicates that this f unction is operating. Setting procedure: Regardless of whether the unit is operating or stop ped, press the 1 HR. TIMER button. appears in the display. Cancellation procedure: Press the ON/OFF operation button to turn the unit off, wait for the unit to stop operating, and then press the ON/OFF o peration button again. The 1-Hour Timer function is now cancelled and the unit operates normally. If, while the 1-Hour Timer function is operating, the 1HR. TIMER button is pressed once to cancel the function and t hen again, the unit continues to operate for one hour from that po int in time and then stops. It is not possible to use the OFF Timer and 1-Hour OFF Timer together. Whichever function is set last takes prec edence. If the 1 HR. TIMER button is pressed while the TIMER OFF fun ction operates, the OFF Timer is cancelled and the unit w ill stop operating one hour later. 2. Operation together with the daily ON/OFF repeat timer The 1-Hour OFF Timer setting is given priority over the DAILY ON/ OFF REPEAT setting. ADJUSTING THE AIRFLOW DIRECTION The vertical airflow can be adjusted by moving the flap with the remote controller. Do not move the flap with your h ands. Confirm that the remote controller has been turned on. Use the F LAP button to set either the sweep function or one of the six air flow direction settings. The flap automatically closes when the unit is off . During the heating operation, the fan speed will b e very low and the flap will be in the horizontal position (position ) until the air being blown out of the unit begins to warm. Once the air warms up, the flap position and fan speed change to the settings specified with the remote controller. Use the FLAP button on the remote controller to ad just the position of the flap. If you move the flap by hand, the flap position according to the remote controller and the actual flap position may no longer match. If this should hap pen, shut off the unit, wait for the flap to close, and then turn on the unit again; the flap position will now be norma l again. Do not have the flap pointed down during cooling o peration. Condensation may begin to form around the air vent and drip down. NOTE HEAT SWEEP SWEEP A. Sweep function The flap starts moving up and down to deliver air over the sweep range. B. Setting the airflow manually Referring to the above illustration, use the FLAP button to set the airflow direction within the range used during the heating, cooling, or dehumidifying operation. COOLDRY FAN NOTE CAUTION
A-2 INSTALLATION INSTRUCTIONS (CZ-RD515U)CZ-RD515U(852-6-4190-592-00-0) APPENDIX B