Panasonic Cs Mk7nku 9nku Operating Instructions Manual

4
• To prevent possible hazards from insulation failure, the unit must 
be grounded.
• Do not clean inside the indoor and outdoor units by users. Engage 
authorized dealer or specialist for cleaning.
• In case of malfunction of this appliance, do not repair by yourself. 
Contact to the sales dealer or service dealer for a repair.
• Refrigerant gas leakage may cause fire.
• For safety, be sure to turn the air conditioner off and also to 
disconnect the power before cleaning.
• Pull off the power plug from...

5
NAMES OF PARTS
This illustration is based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner which you 
have selected.
This air conditioner consists of an indoor unit and an outdoor unit. You can control 
the air conditioner with the remote controller.
Air IntakeAir from the room is drawn into this section and passes through air filters which 
remove dust.
Air OutletConditioned air is blown out of the air conditioner through the air outlet....

6
UNIT DISPLAY AND OPERATION BUTTON
REMOTE CONTROL receiverThis section picks up infrared signals from the remote controller (transmitter).
OPERATION buttonWhen the remote controller cannot be used, pressing this button enables cooling 
operation.
Each time this button is pressed, the operation mode changes cyclically. 
OPERATION lampThis lamp lights when the system is in the continuous DRY (orange), COOL 
(green) and FAN (green) mode.
TIMER lampThis lamp lights when the system is being controlled by the...

7
REMOTE CONTROLLER (DISPLAY)
(1) Operation mode
MILD DRY ..............................
COOL .....................................
FAN ........................................
(2) Fan speed
Automatic operation ...............
HIGH .....................................
MEDIUM.................................
LOW .......................................
(3) Temperature setting 
60–86°F
When set to 80 °F 
temperature indication............(4) Timer
24-hour clock with ON/OFF 
program...

8
REMOTE CONTROLLER
The illustration above pictures the remote controller after the cover has been 
opened.
TransmitterWhen you press the buttons on the remote controller, the   mark appears in the 
display to transmit the setting changes to the receiver in the air conditioner.
SensorA temperature sensor inside the remote controller senses the room temperature.
DisplayInformation on the operating conditions is displayed while the remote controller is 
switched on. If the unit is turned off, FLAP setting...

9
REMOTE CONTROLLER (CONTINUED)
Temperature setting buttons
(TEMP.)Press the   button to increase the set temperature.
Press the   button to reduce the set temperature.
The temperature setting changes by 1 °C or 2 °F each time one of the TEMP. 
buttons is pressed.
MODE selector buttonUse this button to select DRY, COOL or FAN mode.
(DRY): The air conditioner reduces the humidity in the room.
(COOL): The air conditioner makes the room cooler.
(FAN): The air conditioner works only as a circulation fan.
FAN...

10
REMOTE CONTROLLER (CONTINUED)
USING THE REMOTE CONTROLLER
Temperature Display Selector
buttonThis switches the temperature display between °C and °F.
Time Display Selector buttonThis switches the time display between 24-hour time and 12-hour time.
ACL button (ALL CLEAR)Puts the remote controller into pre-operation status. Always press this button 
after replacing the batteries.
ADDRESS switch• The address switch changes to prevent mixing of signals from remote 
controller’s when two air conditioners...

11
USING THE REMOTE CONTROLLER (CONTINUED)
How to Use the Remote
ControllerWhen using the remote controller, always point the unit’s transmitter head directly 
at the air conditioner’s receiver.
Remote Controller Installation
PositionThe remote controller may be operated either from a non-fixed position or from a 
wall-mounted position. To ensure that the air conditioner operates correctly, do 
not install the remote controller in the following places:
• In direct sunlight
• Behind a curtain or other...

12
OPERATION WITH THE REMOTE CONTROLLER
1.  Operation
Check that the circuit breaker on the power panel is turned on.
Press the setting buttons as described below and change the settings as desired.
STEP 1Press the MODE selector button and select the desired mode.
For dehumidifying operationo
For cooling operationo
For fan only operationo
STEP 2To start the air conditioner, press the ON/OFF operation button.
STEP 3Press the TEMP. setting buttons to change the temperature 
setting to the desired...

13
OPERATION WITH THE REMOTE CONTROLLER (CONTINUED)
• Choose the best position in the room for the remote controller, which also acts 
as the sensor for room comfort and transmits the operating instructions. Once 
you’ve found this best position, always keep the remote controller there.
• This appliance has a built-in 5-minute time delay circuit to ensure reliable 
operation. When the operation button is pressed, the compressor will start 
running within three minutes. In the event of power failure, the...