Panasonic Cs Me7e9e12rkuaw Operating Instructions Manual
Have a look at the manual Panasonic Cs Me7e9e12rkuaw Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Français English F569978 Operating Instructions Air Conditioner Model No. Indoor Unit CS-ME7RKUA CS-E9RKUAW CS-E12RKUAW Outdoor Unit Single Split Multi Split CU-E9RKUA CU-E12RKUACU-2E18NBU CU-5E36QBU Operating Instructions Air Conditioner2-12 Thank you for purchasing Panasonic Air Conditioner. Installation instructions attached. Before operating the unit, read these operating instructions thoroughly and keep them for future reference. Instructions d’utilisation Climatiseur13-24 Merci d’avoir acheté un climatiseur Panasonic Instructions d’installation en annexe. Avant d’utiliser le climatiseur, lire ces instructions d’utilisation et les conserver pour s’y référer dans le futur.
2 Operation conditions Use this air conditioner under the following temperature range. DBT : Dry bulb temperature WBT : Wet bulb temperature Temperature (°F/°C)CS-ME7RKUA CS-E9RKUAW CS-E12RKUAWCU-E9RKUA CU-E12RKUACU-2E18NBU CU-5E36QBU DBT WBT DBT WBT DBT WBT COOL Max. 89.6 / 32 73.4 / 23 114.8 / 46 78.8 / 26 114.8 / 46 78.8 / 26 Min. 60.8 / 16 51.8 / 11 0 / -17.8 - / - 14.0 / -10 - / - HEAT Max. 86.0 / 30 - / - 75.2 / 24 64.4 / 18 75.2 / 24 64.4 / 18 Min. 60.8 / 16 - / - -4 / -20 -5.8 / -21 5.0 / -15 3.2 / -16 Power Supply Models Number Time Delay Circuit Breaker Rated Volts CS-E9RKUAW / CU-E9RKUA 15 Amps 208/230V CS-E12RKUAW / CU-E12RKUA 25 Amps CS-ME7RKUA / CS-E9RKUAW / CS-E12RKUAW / CU-2E18NBU 25 Amps CS-ME7RKUA / CS-E9RKUAW / CS-E12RKUAW / CU-5E36QBU 45 Amps Provide fast cooling, maximum comfort, clean air and optimise energy saving ECONAVI and AUTO COMFORT The Right Choice for Energy SavingEquipped with the human activity sensor, the air conditioner ensures to deliver cool or warm air to you, and keeps the room consistently comfortable with minimum energy consumption. See “To learn more...” for details. Multi air conditioner systemMulti air conditioner systems save space by letting you connect multiple indoor units to a single outdoor unit. • For complete product features, please refer catalogue. Indoor units Outdoor unit ( CU-2E18NBU, CU-5E36QBU) Indoor units • It is possible to operate the indoor units individually or simultaneously. The priority of operation is placed on the fi rst unit that turned on. • During operation, HEAT and COOL modes cannot activate at the same time for different indoor units. • The power indicator blinks to indicate the indoor unit is standing by for a different operation mode.
3 English Quick guide 123 Inserting the batteries 1 Pull out the back cover of remote control 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover TIMER SET CANCEL ON OFF1 23 SETAC RC TIMER CANCEL ON OFF 13 SETCHECKRESETACRC 23 1 Clock setting 1 Press CLOCK 2 Set the time 3 Confi rm AUTO COMFORT MODE POWERFUL/ QUIET TEMP OFF/ON TIMER SET CANCEL ON OFF1 23 AIR SWING FAN SPEED SETAC RC ECONAVI FAN SPEED AIR SWINGAUTO HEAT COOL DRY FAN AUTOCOMFORT POWERFUL/QUIET TIMERSET CANCEL ON OFF 123 AIR SWING FAN SPEED SETCHECKCLOCKRESETACRC ECONAVI FANSPEEDAIRSWING AUTOHEATCOOLDRYFAN 1 2 3 26ft/8m Basic operation 1 Select the desired mode DRY AUTO HEAT COOLFA N 2 Start/stop the operation POWER • Please note that the OFF indication is on to start. 3 Select the desired temperature • Selection range (Not applicable for FAN mode): 60°F ~ 86°F / 16°C ~ 30°C. • Operating the unit within the recommended temperature may save energy. HEAT : 68°F ~ 75°F / 20°C ~ 24°C. COOL : 78°F ~ 82°F / 26°C ~ 28°C. DRY : 2°F ~ 4°F / 1°C ~ 2°C lower than room temperature. • To dim or restore the unit’s indicator brightness, press and hold for 5 seconds. • Use remote control within 26ft/8m from the remote control receiver of the indoor unit. The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subject to change without notice for future improvement. Table of contents Safety precautions ...................4-5 How to use...............................6-7 To learn more... .........................8 Cleaning instructions ..................9 Troubleshooting ..................10-11 Information................................12 Accessories • Remote control • AAA or R03 batteries × 2 • Remote control holder • Screws for remote control holder × 2
4 Safety precautions To prevent personal injury, injury to others or property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classifi ed as below: WARNINGThis sign warns of death or serious injury. CAUTIONThis sign warns of injury or damage to property. The instructions to be followed are classifi ed by the following symbols: This symbol denotes an action that is PROHIBITED. These symbols denote actions COMPULSORY. WARNING Indoor unit and outdoor unit This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Please consult authorised dealer or specialist to clean the internal parts, repair, install, remove and reinstall the unit. Improper installation and handling will cause leakage, electric shock or fi re. Confi rm with authorised dealer or specialist on usage of any specifi ed refrigerant type. Using refrigerant type other than the specifi ed may cause product damage, burst and injury etc. Do not install the unit in a potentially explosive or fl ammable atmosphere. Failure to do so could result in fi re. Do not insert your fi ngers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury. Do not touch the outdoor unit during lightning, it may cause electric shock. Do not expose yourself directly to cold air for a long period to avoid excess cooling. Do not sit or step on the unit, you may fall down accidentally. Remote control Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. Power supply Do not use a modifi ed cord, joint cord, extension cord or unspecifi ed cord to prevent overheating and fi re. Indoor unit Outdoor unit Power supply Remote control Air inletAir inlet Air inletAir inlet Air outletAir outlet Air outletAir outlet
5 English To prevent overheating, fi re or electric shock:• Do not share the same power outlet with other equipment. • Do not operate with wet hands. • Do not over bend the power supply cord. If the supply cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualifi ed persons in order to avoid a hazard. It is strongly recommended to install this unit using an Earth Leakage Circuit Breaker (ELCB) or Ground Fault Interrupt (GFCI) or Appliance Leakage Current Interrupt (ALCI) to prevent electric shock or fi re. Stop using the product if any abnormality/ failure occurs or turn off the power switch and breaker. (Risk of smoke/fi re/electric shock) Examples of abnormality/failure • The ELCB or GFCI or ALCI trip frequently. • Burning smell is observed.• Abnormal noise or vibration of the unit is observed. • Water leaks from the indoor unit. • Power cord becomes abnormally hot.• Fan speed cannot be controlled.• The unit stops running immediately even if it is switched on for operation. • The fan does not stop even if the operation is stopped. Contact your local dealer immediately for maintenance or repair assistance. This equipment must be earthed to prevent electrical shock or fi re. Prevent electric shock by switching off the power supply: - Before cleaning or servicing, - When extended non-use, or - During abnormally strong lightning activity. CAUTION Indoor unit and outdoor unit Do not wash the indoor unit with water, benzene, thinner or scouring powder to avoid damage or corrosion at the unit. Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. This may cause quality deterioration, etc. Do not use any combustible equipment in front of the airfl ow outlet to avoid fi re propagation. Do not expose plants or pet directly to airfl ow to avoid injury, etc. Do not touch the sharp aluminium fi n, sharp parts may cause injury. Do not switch ON the indoor unit when waxing the fl oor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not dismantle the unit for cleaning purpose to avoid injury. Do not step onto an unstable bench when cleaning the unit to avoid injury. Do not place a vase or water container on the unit. Water may enter the unit and degrade the insulation. This may cause an electric shock. Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. Remote control Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. • New batteries of the same type must be inserted following the polarity stated. Safety precautions
6 AUTO COMFORT MODE POWERFUL/ QUIET TEMP OFF/ON TIMER SET CANCEL ON OFF1 23 AIR SWING FAN SPEED SETAC RC ECONAVI FAN SPEED AIR SWINGAUTO HEAT COOL DRY FAN / TEMP OFF/ON TIMERSET CANCEL ON OFF 123 CHECK Remote control display Human activity sensor Remote control receiver and Indicator Auto OFF/ON button Use when remote control is misplaced or a malfunction occurs. Raise the front panel: • To use in AUTO mode, press the button once. • To use in COOL mode, press and hold the button until 1 beep is heard, then release. • To use in HEAT mode, press and hold the button until 1 beep is heard, then release. And press again until 2 beeps, then release. • Press the button again to turn off. Press and hold for approximately 10 seconds to show temperature setting in °F or °C. Press and hold for approximately 5 seconds to show 12-hour (am/pm) or 24-hour time indication. Press to restore the remote control to default setting. Not used in normal operations. ECONAVITo optimize energy saving ECONAVI MODETo select operation mode AUTO - For your convenience HEAT - To enjoy warm air COOL - To enjoy cool air DRY - To dehumidify the environment FAN - To circulate air in the room POWERFUL/ QUIETTo switch between powerful & quiet QUIET POWERFUL POWERFUL: To reach temperature quickly POWERFUL Single• This operation stops automatically after 20 minutes. Multi• Press the button again or turn OFF the unit to stop this operation. QUIET: To enjoy quiet operation QUIET • This operation reduces airfl ow noise. FAN SPEEDTo select fan speed (Remote control display) • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. How to use POWER TIMER ECONAVI AUTO COMFORT POWERFUL QUIET (Green) (Orange) (Green) (Green) (Orange) (Orange) SingleSingle split system MultiMulti split system
7 English Note ECONAVI , POWERFUL/ QUIET , AUTO COMFORT • Can be activated in all modes and can be cancelled by pressing the respective button again. • Cannot be selected at the same time. To set the timer 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times. TIMERSET CANCEL ON OFF1 23 AC CCANCEL 3 ACC 213 1Select ON or OFF timerExample: OFF at 11:50PM • Each time pressed: OFFAMCancel 2Set the time2PM 3Confi rmSET PM TIMER • To cancel ON or OFF timer, press ON or OFF to select respective or then press CANCEL. • If timer is cancelled manually or due to power failure, you can restore the timer again by pressing ON or OFF to select respective or then press SET. • The nearest timer setting will be displayed and will activate in sequence. • When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. • Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Quick guide. See To learn more... for details. AUTO COMFORTTo maximize comfort AUTO COMFORT AIR SWINGTo adjust vertical airfl ow direction (Remote control display) • Keeps the room ventilated. • In COOL/DRY mode, if AUTO is set, the fl ap swings up/down automatically. • In HEAT mode, if AUTO is set, the horizontal fl ap is fi xed at the predetermined position. • Do not adjust the fl ap by hand. How to use To adjust horizontal airfl ow direction • Manually adjustable. Auto Restart Control • If power is resumed after a power failure, the operation will restart automatically after a period of time with previous operation mode and airfl ow direction. • This control is not applicable when TIMER is set.
8 Operation mode AUTO : During operation mode selection the POWER indicator blinks.Single• Unit selects operation mode every 10 minutes according to setting temperature and room temperature. Multi• Unit selects operation mode every 3 hours according to setting temperature, outdoor temperature and room temperature. HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation. COOL : Provides effi cient comfort cooling to suit your needs. DRY : Unit operates at low fan speed to give a gentle cooling operation. FA N : To circulate air in the room. ECONAVI and AUTO COMFORT ECONAVIAUTO COMFORTorNote AIR SWINGWhen manual AIR SWING is selected, the ECONAVI and AUTO COMFORT operations will be cancelled. The unit will start to initialize (for approximately 1 minute)The human activity sensor will start to detect. Human activity sensor operation Low activity Normal activity Human Mode Set temperatureHigh activityAbsent ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy. Low activity Normal activity Human Mode Set temperatureHigh activityAbsent Set Fan Speed AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human comfortable consistently.HEAT COOL/DRY HEAT COOL/DRY * During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached. ** During human absence, maximum fan speed for COOL/DRY mode is medium fan. +1 tap”0HGLXP)DQ +1 tap* +2°F / +1°C +2°F / +1°C+0.5°F / +0.3°C -2°F / -1°C -4°F / -2°C+4°F / +2°C -4°F / -2°C -4°F / -2°C+4°F / +2°C -4°F / -2°C The human activity sensor will also scan for area of heat source and movement in a room. Detection area • The human activity sensor performance is infl uenced by indoor unit location, movement speed, temperature range, etc. 90º 23ft/7m • The human activity sensor may: - mistakenly detect an object with heat source & movement similar to human, such as pets, etc. - mistakenly detect as non-heat source & movement if a human stays motionless for certain period of time. • Do not place large objects near the sensor and keep away heating units or humidifi er from the sensor’s detection area. They may cause sensor malfunction. To learn more...SingleSingle split system MultiMulti split system
9 EnglishTo learn more... / Cleaning instructions Cleaning instructions To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. Dirty unit may cause malfunction and you may see error code “H99”. Please consult authorised dealer. • Switch off the power at the circuit breaker before cleaning. • Do not touch the aluminium fi n, sharp parts may cause injury. • Do not use benzene, thinner or scouring powder. • Use only soap ( pH 7) or neutral household detergent. • Do not use water hotter than 104°F / 40°C. Indoor unit Wipe the unit gently with a soft, dry cloth. Human activity sensor Do not hit or violently press or poke it with a sharp object. This can lead to damage and malfunction. Front panel Wash gently and dry. Remove the front panel RaisePull out 1 2 POWER TIM ER EC O NAVI AUTO COMFORTPOWERFULQUIET Close it securely POWER TIM ER EC O NAV I AUTO COMFORTPOWERFULQUIET 2Close down 3Press both ends of the front panelInsert at both sides 1 Air fi lters Every 2 weeks • Wash/rinse the fi lters gently with water to avoid damage to the fi lter surface. • Dry the fi lters thoroughly under shade, away from fi re or direct sunlight. • Replace any damaged fi lters. Remove air fi lter Attach air fi lter Insert into the unit Air purifying fi lter Vacuum the air purifying fi lter • It is recommended to clean the fi lter every 6 months. • Replace the fi lter every 3 years or replace any damaged fi lter. Part no.: CZ-SA20P For seasonal inspection after extended non-use • Checking of remote control batteries.• No obstruction at air inlet and air outlet vents.• Use Auto OFF/ON button to select COOL/ HEAT operation. After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: COOL: ≥14.4°F/8°C HEAT: ≥25.2°F/14°C For extended non-use • Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. • Turn off the power supply.• Remove the remote control batteries. Indoor unit POWER TIM ER EC O NAV I AUTO COMFORTPOWERFULQUIET Aluminium fi n Front panel Air fi lters Human activity sensor Air purifying fi lter
10 The following symptoms do not indicate malfunction. SymptomCause Mist emerges from indoor unit. • Condensation effect due to cooling process. Water fl owing sound during operation. • Refrigerant fl ow inside the unit. The room has a peculiar odour. • This may be due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic fan speed setting.• This helps to remove the surrounding odour. Airfl ow continues even after operation has stopped.• Extraction of remaining heat from the indoor unit (maximum 30 seconds). Operation is delayed a few minutes after restarting.• The delay is a protection to the unit’s compressor. Outdoor unit emits water/steam. • Condensation or evaporation occurs on pipes. TIMER indicator is always on. • The timer setting repeats daily once set. POWER indicator blinks during HEAT mode with no warm air supply (and fl ap is closed).• The unit is in defrost mode (and AIR SWING is set to AUTO). Indoor fan stops occasionally during heating operation.• To avoid unintended cooling effect. POWER indicator blinks before the unit is switched on.• This is a preliminary step in preparation for the operation when the ON timer has been set. Cracking sound during operation. • Changes of temperature caused the expansion/ contraction of the unit. Discoloration of some plastic parts. • Discoloration is subject to material types used in plastic parts, accelerated when exposed to heat, sun light, UV light, or environmental factor. Check the following before calling for servicing. SymptomCheck Operation in HEAT/COOL mode is not working effi ciently.• Set the temperature correctly. • Close all doors and windows. • Clean or replace the fi lters. • Clear any obstruction at the air inlet and air outlet vents. Noisy during operation. • Check if the unit has been installed at an incline. • Close the front panel properly. Remote control does not work. (Display is dim or transmission signal is weak.)• Insert the batteries correctly. • Replace weak batteries. The unit does not work. • Check if the circuit breaker is tripped. • Check if timers have been set. The unit does not receive the signal from the remote control.• Make sure the receiver is not obstructed. • Certain fl uorescent lights may interfere with signal transmitter. Please consult authorised dealer. Troubleshooting NON SERVICEABLE CRITERIASSWITCH OFF POWER AT THE CIRCUIT BREAKER then please consult an authorised dealer under the following conditions: • Abnormal noise during operation. • Water/foreign particles have entered the remote control. • Water leaks from Indoor unit.• Circuit breaker switches off frequently. • Switches or buttons are not functioning properly.