Panasonic Cs E9 12 18sd3uaw Operating Instructions Manual

Français English
ACXF55-01620
 
Operating Instructions
Air Conditioner2-11
Instructions d’utilisation
Climatiseur13-23
Operating Instructions
Air Conditioner
Model No.
Indoor Unit 
E series ME series
CS-E9SD3UAW
CS-E12SD3UAW
CS-E18SD3UAWCS-ME5SD3UA
CS-ME7SD3UA
Outdoor Unit
Single Split Multi Split
CU-E9SD3UA
CU-E12SD3UA
CU-E18SD3UACU-2E18SBU
CU-3E19RBU
CU-4E24RBU
CU-5E36QBU 

2
Thank you for purchasing Panasonic Air Conditioner.
Installation instructions attached.
Before operating the unit, please read these operating instructions thoroughly and keep them for future 
reference.
The illustrations in this manual are for explanation purposes only and may differ from the actual unit. 
They are subject to change without notice for future improvement.
Multi air conditioner system
Multi air conditioner systems save space by 
letting you connect multiple indoor units to a 
single...

3
English
Table of contents
Safety precautions ...................4-5
How to use...............................6-7
Cleaning Instruction ....................8 
Troubleshooting .....................9-10
Information................................11
Accessories
• Remote  control
• AAA or R03 batteries × 2
• Remote control holder
• Screws for remote control 
holder × 2
Quick guide
123
Inserting the batteries
1
  Pull out the back cover of 
remote control
2  Insert AAA or R03 batteries 
(can be used ~ 1...

4
Safety precautions
To prevent personal injury, injury to others 
or property damage, please comply with the 
following: 
Incorrect operation due to failure to follow 
instructions below may cause harm or damage, 
the seriousness of which is classifi ed as below:
WARNINGThis sign warns of 
death or serious 
injury.
CAUTIONThis sign warns of 
injury or damage to 
property.
The instructions to be followed are classifi ed by 
the following symbols:
This symbol denotes an 
action that is PROHIBITED.
These...

5
English Safety precautions
To prevent overheating, fi re or electric shock:• Do not share the same power outlet with 
other equipment.
• Do not operate with wet hands. • Do not over bend the power supply cord.
If the supply cord is damaged, it must be 
replaced by the manufacturer, service agent 
or similarly qualifi ed persons in order to avoid 
a hazard.
It is strongly recommended to install this 
unit using an Earth Leakage Circuit Breaker 
(ELCB) or Ground Fault Interrupt (GFCI) or 
Appliance Leakage...

6
How to use
POWERFULQUIET
AIR CONDITIONER
MODEAIR CONDITIONER
MODE
Press and hold for 
approximately 
10 seconds to show 
temperature setting in 
°F or °C.
Press and hold for 
approximately 
5 seconds to show
12-hour (am/pm) or
24-hour time indication.
Press to restore the 
remote control to 
default setting.
Not used in normal 
operations.
Remote control display
To select operation mode
AUTO - For your convenience
• During initial operation mode selection, the 
Power indicator blinks.
Single• Unit...

7
English
QUIETTo enjoy quiet operation
QUIET
• This operation reduces airfl ow noise.
Can be activated in all modes and can be
cancelled by pressing the respective button again.
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically 
adjusted according to the operation mode.
How to use
To set the timer
2 sets of ON and OFF timers are available 
to turn ON or OFF the unit at different preset 
times.
213
1Select ON or OFF 
timerExample: 
OFF at 22:00
• Each time...

8
Cleaning Instruction 
To ensure optimal performance of the unit, 
cleaning has to be carried out at regular 
intervals.
• Switch off the power supply and unplug before 
cleaning.
• Do not touch the aluminium fi n, sharp parts may 
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
 pH 7) or neutral household 
detergent.
• Do not use water hotter than 104°F / 40°C.
Remote control receiver
Wipe the receiver gently with a 
soft, dry cloth.
For seasonal inspection after...

9
English
Troubleshooting
The following symptoms do not indicate malfunction.
SymptomCause
Mist emerges from indoor unit. • Condensation effect due to cooling process.
Water fl owing sound during operation. • Refrigerant fl ow inside the unit.
The room has a peculiar odour. • This may be due to damp smell emitted by the wall, 
carpet, furniture or clothing.
Indoor fan stops occasionally during automatic 
fan speed setting.• This helps to remove the surrounding odour.
Operation is delayed a few minutes...

10
The unit stops and the TIMER indicator blinks.
Use remote control to retrieve error code.
Press until you hear beep sound, then 
write down the error code21
3
Press for 5 seconds 
to quit checkingTurn the unit off and reveal the error code 
to authorised dealer4 Press for 5 seconds
• For certain errors, you may restart the unit for limited operation with 4 beeps when operation starts.
Diagnostic 
displayAbnormality/Protection 
control
H 00
No memory of failure
H 11Indoor/outdoor abnormal...