Panasonic Cordless Impact Driver/Cordless Impact Wrench EYFLA1A, EYFLA2A, EYFLA2Q, EYFLA3J Operating Instructions

- 11 -  

• You  can  select  from  30  torque  clutch settings (1 to 30).
•  Use  figures  from  the  Tightening  Torque 
Chart  to  guide  your  selection  of  torque clutch setting. (See the following tighten-ing torque chart)
.  Press  the  OK  button  to  accept  the  select
-ed torque clutch setting. 
•  The  control  panel  will  stop  flashing  and 
light up.
CAUTION:
• You  must  press  the  OK  button  in  order 
for the selected setting to take effect.
•  Be  sure  to  verify  the  new...

- 1 - 

3. Press  the  OK  button  to  accept  the  select-ed setting. 
•  The  control  panel  will  stop  flashing  and 
light up. 
Checking Tool Settings
• This  section  describes  how  to  have  the 
tool  display  current  settings  for  approx-i m a t e l y   3   s e c o n d s   w h e n   t h e   t o o l   i s stopped.
•  You  cannot  check  tool  settings  when  the 
control  panel  is  turned  off.  First,  engage the switch briefly to reactivate the display.
Checking the torque clutch...

- 13 -  

Error Display
In the event of a tool or battery pack malfunction, the control panel will display an error message. Please  check  the  tool  or  battery  pack  as  described  in  the  following  chart  before  having  them serviced.
DisplayLikely causeCorrective action
Setting errorRe-initialize the tool using the 
remote control. (See page 1.)
The battery pack is too hot.Stop work and allow the battery pack to cool before resuming use of the tool.
The tool is too hot to operate.Stop work...

- 14 - 

Battery Pack Life
The rechargeable batteries have a limited life. If the operation time becomes extremely short after recharging, replace the battery pack with a new one.
Battery Recycling
ATTENTION:
FOR Li­ion Battery Pack, EYFB30A  Li-ion  battery  that  is  recyclable  powers the product you have purchased.Please  call 1­800­8­BATTERY  for  infor-mation on how to recycle this battery.
[Battery Charger]
Charging
Read the operating manual for Panasonic bat-tery charger for the battery pack...

- 15 -  

VIII. SPECIFICATIONS
MAIN UNIT
ModelEYFLA1 EYFLAEYFLA3
AAQJ
Moter10.8 V DC
Chuck sizeSingle-ended9 – 9.5 mm
(3/64" – 3/8")9 – 9.5 mm
(3/64"
– 3/8")
□9.5 mm(3/8")□
1.7 mm (1/")
Double-ended 1 mm (15/3")
1 mm
(15/3")
No load speedStage13 – 56789 – 30·F
0 – 9500 – 10000 – 10500 – 13000 – 14500 – 1550
0 – 300
134 – 30·F
0 – 13000 – 14500 – 1550
0 – 3000 – 300
Impact per minuteStage13 – 56789...

- 16 - 
BATTERY PACK (not included with shipment)
ModelEYFB30
Storage batteryLi-ion battery
Battery voltage10.8 V DC (3.6 V/6 cells)
Capacity3 Ah
BATTERY CHARGER (not included with shipment)
ModelEY0L80
RatingSee the rating plate on the bottom of the charger.
Weight0.95 kg (.1 lbs)
[Li­ion battery pack]
Charging time3 Ah
10.8 V
EYFB30Usable: 40 min.
Full: 65 min.
Remote control (not included with shipment)
ModelEYFA30
Battery voltage3 V DC
Dimensions 54 mm (-1/8") × 86 mm (3-3/8") × 10...