Panasonic Convertible Camera Aw E800 Operating Instructions
Have a look at the manual Panasonic Convertible Camera Aw E800 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 45
-43-
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$22-dimensional Lowpass Filter Setting [2D LPF:
OFF/LOW/HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
$3Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$4Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of...](http://img.usermanuals.tech/thumb/58/68278/w64_aw-e800_en_om_d-44.png "Page 45
-43-
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$22-dimensional Lowpass Filter Setting [2D LPF:
OFF/LOW/HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
$3Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$4Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of...")
![Page 46
-44-
%4Flesh Noise Suppress Level Setting [Flesh Noise
Suppress: OFF/LOW/HIGH]
Flesh noise is suppressed in two steps when the
DTL Level is at HIGH or LOW.
%5Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $7is at HIGH or LOW.
%6Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare.
%7Color Matrix Compensation Level...](http://img.usermanuals.tech/thumb/58/68278/w64_aw-e800_en_om_d-45.png "Page 46
-44-
%4Flesh Noise Suppress Level Setting [Flesh Noise
Suppress: OFF/LOW/HIGH]
Flesh noise is suppressed in two steps when the
DTL Level is at HIGH or LOW.
%5Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $7is at HIGH or LOW.
%6Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare.
%7Color Matrix Compensation Level...")
![Page 47
-45-
When an option card is added, only the composite
output and Y/C output will be reproduced in nega-
tive image.
Note (G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and cyan
(B-G):To increase or decrease purple
%8Gamma Correction Level Setting
[Gamma: 0.35 - 0.55]
Gamma correction level can be set.
%9Knee Compensation Level Setting [Knee Point:
88% -...](http://img.usermanuals.tech/thumb/58/68278/w64_aw-e800_en_om_d-46.png "Page 47
-45-
When an option card is added, only the composite
output and Y/C output will be reproduced in nega-
tive image.
Note (G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and cyan
(B-G):To increase or decrease purple
%8Gamma Correction Level Setting
[Gamma: 0.35 - 0.55]
Gamma correction level can be set.
%9Knee Compensation Level Setting [Knee Point:
88% -...")
![Page 48
-46-
Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K....](http://img.usermanuals.tech/thumb/58/68278/w64_aw-e800_en_om_d-47.png "Page 48
-46-
Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K....")
-49- Convertible Camera AW-E800WIDE VIDEO OUT G/L INI/F REMOTE OPTION CARD IRIS DC12V IN MENUITEM/AWCYES/ABCNO/BAR 84 (3-5/16)170 (6-11/16) 12 (15/32) 10 (25/64) 77 (3-1/32) 15 (19/32) APPEARANCE Unit: mm (inch)
-50- Pickup element: 2/3 interline, supersensitive CCDx3 Pixels: 948 (H) x 485 (V) pixels Scanning: 2:1 interlace System: NTSC Scanning frequency: 15.734 kHz (horizontal), 59.94 Hz (vertical) Lens mount: 2/3 Standard byonet mount Synchronizing: Internal or external External sync input: BB, (BNC,50P D subconnector) Sensitivity: 2 000 lx, F11, 3 200 K Minimum illumination: 1 lx, F1.7, Night Eye mode Signal-to-noise ratio: 62 dB (DTL OFF) Aspect Ratio: 16 : 9, 4 : 3 Horizontal resolution: 800 TV lines (high band DTL ON, 16 : 9), 850 TV lines (high band DTL ON, 4 : 3) Registration: 0.05 % Contour correction: Horizontal and vertical White balance: Auto (2 memories), 3 200 K, 5 600 K, FINE MANU, ATW Black balance: AUTO Color bar: SMPTE color bar (Setup 0/7.5) Shutter speed: Synchro Scan: 60.58 Hz-15.75 kHz Step shutter: OFF 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000s ELC Gain: AGC LOW/HIGH, 0 - 30 dB, NIGHT EYE Video output: Composite: 1 V[p-p] (75 Ω) (BNC, 50P D subconnector) Y: 1 V[p-p] (75 Ω) (50P D subconnector) C: Same as VBS chroma level (75 Ω) (50P D subconnector) Use mode: Halogen, Fluorescent, Outdoor, User SPECIFICATIONS
-51- Switches: BACK PANEL: MENU, ITEM/AWC, YES/ABC, NO/BAR MENU ITEM SETTING: Gain, Shutter, White Balance, Detail Level (OFF/LOW/HIGH), Corner Detail, Precision Detail Level, Black Stretch, High Light Chroma, Flesh Noise Suppress, Photometric Measurement Method (ALL/CENTER/TOP CUT/BOTTOM CUT/R/L CUT) CCD Read Out Mode (FIELD/FRAME 1/FRAME 2), Color bar Setup, Use Mode, Nega/Posi, PC Control Access Speed, Aspect Ratio (16 : 9/4 : 3), Fan (ON/OFF) Adjustment function: MENU ADJUSTMENT: R/B Gain, R/B Pedestal, Black Level, Video Level, Detecting Ratio, Genlock Horizontal Phase/Color Phase, Gamma Compensation Level, Knee Compensation Level, White Clip Level, Horizontal Detail Level, Vertical Detail Level, Detail Band, Noise Suppress Compensation Level, Level Dependent Compensation Level, Chroma Detail Compensation Level, Dark Detail Compensation Level, Matrix Compensation Level, Flare Correction Level Source voltage: DC 12 V Power consumption: 14.4 W Operating temperature:−10°C to +45°C (14°F to +113°F) Operating humidity: 30 % to 90 % Dimensions: 84 (W) x 92 (H) x 192 (D) mm [3-5/16” x 3-5/8” x 7-9/16”] Weight: 1.07 kg Finish: AV ivory painting (Munsell 7.9Y 6.8/0.8 or equivalent) Weight and dimensions indicated are approximate. Specifications are subject to change without notice.
-52- Pan/Tilt Unit AW-PH300 Pan/Tilt Unit AC Adaptor AW-PS300 Hybrid Control Panel AW-RP501 Multi Hybrid Control Panel AW-RP505 Multi Port Hab AW-HB505 Control Panel AC Adaptor AW-PS301 AC Adaptor AW-PS505 Remote Control Unit WV-RC700A WV-RC550 Remote Control Box WV-CB700A Camera Mounting Bracket WV-831 RCU Rack Mount Frame WV-Q70 VF Mounting Bracket AW-Q40 Connection Cable WV-CA9T5 (D sub9p-BNC, approx. 5 m) Studio Cable WV-CA26U15 WV-CA26U30 WV-CA26U100Cable Joint Adaptor WV-CA26T26 RCB Cable AW-CA50T10 RCB Extension Cable AW-CA50B10 RCU Cable AW-CA50A26 Pan/Tilt Unit Cable AW-CA50T15 PC Control Camera Pan/Tilt Unit Cable AW-CA50A15 PC Control Pan/Tilt Unit Cable AW-CA28T9 PC Control Cable AW-CA50T9 DC Power Cable AW-CA4T1 RGB Cable AW-CA50T6 Studio Card (RGB, YPr-YP bOutputs) AW-PB301 Studio Card (Y, C Outputs) AW-PB305 RGB Card AW-PB302 High Sensitivity Card AW-PB303 SDI Card AW-PB304 Lens I/F Card AW-PB308 Body cap ..................................................................... 1 Rubber Sheet ............................................................... 1 STANDARD ACCESSORIES OPTIONAL ACCESSORIES Mounting Adaptor ................................................. 1 Screw .................................................................... 2
NM1199-1010 7J1A402B Printed in Japan© 1999 Matsushita Communication Industrial Co.,Ltd. PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANYDIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office:3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region:1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024 (770) 338-6845 Central Region:1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE:3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 Dallas Region:6226 Abington Way, Houston, TX 77008 (713) 802-2726 Government Marketing Department:52 West Gude Drive, Rockville, MD 20850 (301) 738-3840 PANASONIC CANADA INC. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 (905) 238-2115 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC. San Gabriel Industrial Park, 65th Infantry Ave., KM9.5 Carolina, Puerto Rico 00630 (809) 750-4300