Panasonic Convertible Camera Aw E800 Operating Instructions
Here you can view all the pages of manual Panasonic Convertible Camera Aw E800 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
-39-
All Center Top cut BTM cut R/L cut
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
RCU (RCB)
Iris Control
Iris Switch
#1Auto Iris Level Fine Adjustment [Auto Iris
Adjust: ON/OFF]
ON:Fine adjustment of auto iris convergence
level can be made with the iris control when
the iris switch on the RCU (RCB) or on the
hybrid control panel is in the AUTO posi-
tion.
OFF:The iris control is invalid when the iris
switch on the RCU...](http://img.usermanuals.tech/thumb/58/68278/w300_aw-e800_en_om_d-40.png "Page 41
-39-
All Center Top cut BTM cut R/L cut
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
RCU (RCB)
Iris Control
Iris Switch
#1Auto Iris Level Fine Adjustment [Auto Iris
Adjust: ON/OFF]
ON:Fine adjustment of auto iris convergence
level can be made with the iris control when
the iris switch on the RCU (RCB) or on the
hybrid control panel is in the AUTO posi-
tion.
OFF:The iris control is invalid when the iris
switch on the RCU...")
-39- All Center Top cut BTM cut R/L cut RB RB PED TOTAL PEDA BATW AWC AUTOHOLD ABC IRISMAN AUTO1000 S/S ELC 500 100 OFFSHUTTER SCENE21 3 USER SET AUTO/ATWPAINTINGGAIN RCU (RCB) Iris Control Iris Switch #1Auto Iris Level Fine Adjustment [Auto Iris Adjust: ON/OFF] ON:Fine adjustment of auto iris convergence level can be made with the iris control when the iris switch on the RCU (RCB) or on the hybrid control panel is in the AUTO posi- tion. OFF:The iris control is invalid when the iris switch on the RCU...
Page 42
-40- • In case of using the RCU (RCB), none of the shut- ter speeds–1/250, 1/2 000, 1/4 000, and 1/10 000 can be selected. • In case of using the hybrid control panel, only OFF, 1/100, or ELC can be selected. • If the lens iris switch is at M (Manual) when oper- ating the camera alone or when the iris switch on the RCU (RCB) is at AUTO, ELC may not function. Set the lens iris switch to A (Auto). • Flickering may increase at ELC under fluorescent lights. Notes #2Electronic Shutter Mode Setting [Shutter...
Page 43
![Page 43
Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000Synchro-scan
-
100.3 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
#5CCD Read Out Mode Setting [Field/Frame:
Field/Frame 1/Frame 2]
Field:CCD storage will be by field storage.
Frame 1:Vertical resolution increases in frame stor-
age.
Frame 2:Vertical resolution is raised without
increasing residual images by frame storage
and electronic shutter.
#6Gain Up Setting [Gain: AGC...](http://img.usermanuals.tech/thumb/58/68278/w300_aw-e800_en_om_d-42.png "Page 43
Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000Synchro-scan
-
100.3 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
#5CCD Read Out Mode Setting [Field/Frame:
Field/Frame 1/Frame 2]
Field:CCD storage will be by field storage.
Frame 1:Vertical resolution increases in frame stor-
age.
Frame 2:Vertical resolution is raised without
increasing residual images by frame storage
and electronic shutter.
#6Gain Up Setting [Gain: AGC...")
Shutter Speed OFF 1/100 1/250 1/500 1/1 000 1/2 000 1/4 000 1/10 000Synchro-scan - 100.3 Hz 250.0 Hz 492.2 Hz 984.4 Hz 1.969 kHz 3.938 kHz 7.875 kHz Required luminance ratio 1 2 4 8 16 32 64 160 -41- #5CCD Read Out Mode Setting [Field/Frame: Field/Frame 1/Frame 2] Field:CCD storage will be by field storage. Frame 1:Vertical resolution increases in frame stor- age. Frame 2:Vertical resolution is raised without increasing residual images by frame storage and electronic shutter. #6Gain Up Setting [Gain: AGC...
Page 44
![Page 44
-42-
Neither P SET 3 200K nor P SET 5 600K can be set
from the RCU (RCB) or the hybrid control panel.
Note
#7Black Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig-
nal can be set. Used in adjusting the black levels
of two or more cameras.
#8Chroma Level Adjustment [Chroma Level: –3 -
+3]
Chroma Level can be decreased or increased to
three levels.
#9White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW:The white balance is automatically...](http://img.usermanuals.tech/thumb/58/68278/w300_aw-e800_en_om_d-43.png "Page 44
-42-
Neither P SET 3 200K nor P SET 5 600K can be set
from the RCU (RCB) or the hybrid control panel.
Note
#7Black Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig-
nal can be set. Used in adjusting the black levels
of two or more cameras.
#8Chroma Level Adjustment [Chroma Level: –3 -
+3]
Chroma Level can be decreased or increased to
three levels.
#9White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW:The white balance is automatically...")
-42- Neither P SET 3 200K nor P SET 5 600K can be set from the RCU (RCB) or the hybrid control panel. Note #7Black Level Setting [Pedestal: –30 - +30] The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras. #8Chroma Level Adjustment [Chroma Level: –3 - +3] Chroma Level can be decreased or increased to three levels. #9White Balance Setting [White Bal: ATW/AWC A/ AWC B/P SET 3 200K/P SET 5 600K] ATW:The white balance is automatically...
Page 45
![Page 45
-43-
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$22-dimensional Lowpass Filter Setting [2D LPF:
OFF/LOW/HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
$3Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$4Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of...](http://img.usermanuals.tech/thumb/58/68278/w300_aw-e800_en_om_d-44.png "Page 45
-43-
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$22-dimensional Lowpass Filter Setting [2D LPF:
OFF/LOW/HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
$3Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$4Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of...")
-43- RB RB PED TOTAL PEDA BATW AWC AUTOHOLD ABC IRISMAN AUTO1000 S/S ELC 500 100 OFFSHUTTER SCENE21 3 USER SET AUTO/ATWPAINTINGGAIN R/B Gain Control RCU (RCB) R/B Pedestal Control $22-dimensional Lowpass Filter Setting [2D LPF: OFF/LOW/HIGH] The 2D lowpass filter that reduces moire and cross color can be set. $3Horizontal Phase Adjustment [H Phase: –206 - +49] Horizontal phase can be adjusted when a genlock signal is supplied. $4Subcarrier Phase Coarse Adjustment [SC Coarse: 1/2/3/4] Coarse adjustment of...
Page 46
![Page 46
-44-
%4Flesh Noise Suppress Level Setting [Flesh Noise
Suppress: OFF/LOW/HIGH]
Flesh noise is suppressed in two steps when the
DTL Level is at HIGH or LOW.
%5Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $7is at HIGH or LOW.
%6Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare.
%7Color Matrix Compensation Level...](http://img.usermanuals.tech/thumb/58/68278/w300_aw-e800_en_om_d-45.png "Page 46
-44-
%4Flesh Noise Suppress Level Setting [Flesh Noise
Suppress: OFF/LOW/HIGH]
Flesh noise is suppressed in two steps when the
DTL Level is at HIGH or LOW.
%5Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $7is at HIGH or LOW.
%6Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare.
%7Color Matrix Compensation Level...")
-44- %4Flesh Noise Suppress Level Setting [Flesh Noise Suppress: OFF/LOW/HIGH] Flesh noise is suppressed in two steps when the DTL Level is at HIGH or LOW. %5Corner Detail Setting [Corner Detail: OFF/ON] Corner detail, which improves the resolution of cor- ners, can be turned on or off when the Detail Level Setting $7is at HIGH or LOW. %6Precision Detail Level Setting [Precision Detail: OFF/LOW/HIGH] This setting is to narrow detail width and suppress detail glare. %7Color Matrix Compensation Level...
Page 47
![Page 47
-45-
When an option card is added, only the composite
output and Y/C output will be reproduced in nega-
tive image.
Note (G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and cyan
(B-G):To increase or decrease purple
%8Gamma Correction Level Setting
[Gamma: 0.35 - 0.55]
Gamma correction level can be set.
%9Knee Compensation Level Setting [Knee Point:
88% -...](http://img.usermanuals.tech/thumb/58/68278/w300_aw-e800_en_om_d-46.png "Page 47
-45-
When an option card is added, only the composite
output and Y/C output will be reproduced in nega-
tive image.
Note (G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and cyan
(B-G):To increase or decrease purple
%8Gamma Correction Level Setting
[Gamma: 0.35 - 0.55]
Gamma correction level can be set.
%9Knee Compensation Level Setting [Knee Point:
88% -...")
-45- When an option card is added, only the composite output and Y/C output will be reproduced in nega- tive image. Note (G-R):To increase or decrease the intermediate color between green and cyan (G-B):To increase or decrease yellowish green (B-R):To increase or decrease the intermediate color between blue and cyan (B-G):To increase or decrease purple %8Gamma Correction Level Setting [Gamma: 0.35 - 0.55] Gamma correction level can be set. %9Knee Compensation Level Setting [Knee Point: 88% -...
Page 48
![Page 48
-46-
Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K....](http://img.usermanuals.tech/thumb/58/68278/w300_aw-e800_en_om_d-47.png "Page 48
-46-
Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K....")
-46- Setting to initial set In case of the wrong setting in any use mode, take the following steps to return to the initial settings. (1) Select [Initialize Data] on the main menu screen of each Use Mode. (See page 29.) Press the YES/ABC switch, then [Initialize Data] screen shown for about 10 seconds. (2) Press the YES/ABC switch within about 10 seconds to return to the initial settings, the existing settings ** Initialize Data ** (Halogen Mode) Do you want to initialize Halogen Mode settings? O.K....
Page 49
-47- INITIAL SETTINGS OF THE SETTING ITEMS (Factory preset values) Halogen, Fluorescent, Outdoor Mode Picture Level Light PEAK/AVG Light Area Auto ND (ELC) Auto Gain Up Manu Gain Up Pedestal Contrast (Gamma) Brightness Set Other Set G/L, Color Bar Set Shutter Speed Synchro Scan V Resolution Baud Rate Nega/Posi Aspect Ratio FanItem +2 ±0 ATW OFF ±0 1 ±0 7.5 IRE Normal HIGH OFF OFF Auto ND ---Normal 9 600bps Posi 16 : 9 ON ±0 0 Top cut ON HIGH ---–10 MIDOutdoor mode +1 ±0 AWC A OFF ±0 1 ±0 7.5 IRE...
Page 50
-48- User Mode Iris, Shutter, Gain Set 0.45 97% 103% 0 0 0 OFF 9 600bps Posi 16 : 9 HIGH +11 +12 +7 +6 2 3 0% 0 Picture Level Light PEAK/AVG Light Area Auto Iris Adjust Shutter Mode Step Synchro Scan Field/Frame Gain Pedestal±0 0 Top cut OFF Step OFF --- Field 0dB ±0 Chroma Level White Bal High-light Chroma Painting R Gain B Gain R Pedestal B Pedestal 2D LPF Color Set±0 AWC A OFF ±0 ±0 ±0 ±0 OFF H Phase SC Coarse SC Fine Color Bar Set G/L, Color Bar Set±0 1 ±0 7.5 IRE Detail H Detail Level H V Detail...