Panasonic Convertible Camera Aw E800 Operating Instructions

-19-
CONNECTION OF COMPUTER
The system shown here can remotely control this camera by using a computer.
The software and the cable for RS-232C required for this operation should be obtained locally.
Please contact qualified service personnel for this software.
VIDEO OUT
G/L INI/F REMOTE OPTION CARD
IRIS
DC12V IN
MENUITEM/AWCYES/ABCNO/BAR
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
DC Power Cable
AW-CA4T1
Computer VIDEO OUT Connector
AC ADAPTOR AW-PS50575 ΩCoaxial Cable
Composite Video...

-20-
Color temperature and adjustment of white
balance
When carbon is burnt, it develops various colors of light
depending on the temperature.  Natural light can be
specified by color temperature referring to the color
developed when carbon is burnt.
The light of 3 200K (K=Kelvin, −273C equals to abso-
lute zero temperature 0K) represents the same value
(color) as what develops when carbon is burnt at
3 200K (2 927C).  The relationship between the color
temperature of the light source and weather...

-21-
AUTOMATIC WHITE BALANCE
CONTROL (AWC)
There are two white balance memories, “AWC A” or
“AWC B” for two different light sources color tempera-
tures, with the automatic white balance setting.  Then,
when the two different light sources are encountered,
you may operate the camera properly by simply
change the white balance mode to either AWC A or
AWC B.  There is no need to readjust the camera to the
ambient conditions.
* The preset conditions will be renewed whenever
you input new conditions.
1....

-22-
Notes:
• For white balance setting aim the camera at a
white object and try to position it in the center of
the monitor screen.  The object must appear in
over 10 % of the total monitor screen area.  Try
to avoid overly bright objects in the scene.
• White balance may not be correctly set if the
lighting of the object is too weak.
• Since the camera has a built-in memory, the set
white balance will remain in the memory even if
power is turned off.  Therefore, it is not neces-
sary to reset the white...

-23-
RESET TO 3 200K OR 5 600K WHITE
BALANCE
When the white balance setting is set to either “P SET
3 200K” or “P SET 5 600K” the white balance will be
automatically set to the color temperature 3 200K or
5 600K, respectively.
BLACK BALANCE ADJUSTMENT
• Close the lens.
If the motor drive lens is controlled from the cam-
era, the lens is automatically closed when the black
balance is adjusted.
• When the camera is used without a RCU or RCB,
R/B pedestal adjustment of painting setting will be...

-24-
TOTAL PEDESTAL LEVEL ADJUST-
MENT
(Use an oscilloscope or a waveform monitor for this
adjustment.)
This step is to adjust the black levels (pedestal levels)
of two or more cameras to be the same.
[ADJUSTMENT by CAMERA]
1. Close the lens.
2. Select Pedestal item in the brightness setting Sub
Menu (Select [Pedestal] in the [Iris, Shutter, Gain
Set] sub menu in USER MODE.)
3. Set the pedestal level to 5 IRE (0.035 V) with the
YES/ABC switch or the NO/BAR switch.
[ADJUSTMENT with RCU (RCB, Hybrid...

-25-
[ADJUSTMENT by CAMERA]
1. Press the NO/BAR switch for over 5 seconds to dis-
play the color bar.
2. Select [G/L Adjustment] on the main menu, then
select [H PHASE] on the submenu.
3. Adjust the horizontal phase with the YES/ABC and
NO/BAR switch.
External gen-lock input signal
(black burst output of special
effect generator)
Video signal
[ADJUSTMENT with RCU (RCB, Hybrid control panel )]
Use the horizontal phase control.
**G/L,@Color Bar Set**
 H Phase               ±0
 SC Coarse              1
 SC...

-26-
COLOR PHASE ADJUSTMENT
Supply the output signal (split color bar) from the color
special effect generator to a color monitor or vec-
torscope.  Adjust the color phase of the camera.
[ADJUSTMENT with RCU (RCB, Hybrid control panel)]
Use the subcarrier phase coarse adjustment control
and subcarrier phase fine control.
* It is recommended that a vectorscope be used for
maximum accuracy in color phase adjustment.
[ADJUSTMENT by CAMERA]
1. Press the NO/BAR switch for over 5 seconds for the
color bar...

-27-
Use Mode Setting
The camera has four use modes, and various functions
for four use modes have been preset.
Functions can be set as best suited to each use mode.
• Halogen mode
Suited to indoor shooting, such as at weddings,
parties, lecture meetings, events, etc.
Settings can be changed using a simple menu.
• Fluorescent mode
Suited to indoor shooting under fluorescent lighting.
Settings can be changed using a simple menu.
• Outdoor mode
Suited to outdoor shooting.
Settings can be changed using a...

POWEROPERATE
BAR
CAMMODEGAIN AWC
SCENE
FILEABC
AT W
A
B
AUTO/AIW
ELC LOW MID
MANUON SC H
OFF HIGH AGC
OFF 1 / 100SHUTTERON
OFF
1 .
2 .
3 .
4 .
G/L PHASE
T.PEDCABLE COMP 90°   180°
0°        270°
YC
SCENE FILE Switch
Operation mode
-28-
SETTING BY RCU (RCB) OR HYBRID
CONTROL PANEL
An operation mode is selected depending on the posi-
tion of the scene file switch.
Halogen Mode
Fluorescent Mode
Outdoor Mode
Users Mode
Scene File
Switch
Position of
RCU (RCB)
1
2
3
USER SETScene File
Switch
Position of...