Panasonic Convertible Camera Aw E600 Operating Instructions
Here you can view all the pages of manual Panasonic Convertible Camera Aw E600 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
-39-
#0Auto Iris Level Fine Adjustment [Auto Iris
Adjust: ON/OFF]
ON:Fine adjustment of auto iris convergence
level can be made with the iris control when
the iris switch on the RCU (RCB) or on the
hybrid control panel is in the AUTO posi-
tion.
OFF:The iris control is invalid when the iris
switch on the RCU (RCB) or on the hybrid
control panel is in the AUTO position.
All Center Top cut BTM cut R/L cut
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3...](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-40.png "Page 41
-39-
#0Auto Iris Level Fine Adjustment [Auto Iris
Adjust: ON/OFF]
ON:Fine adjustment of auto iris convergence
level can be made with the iris control when
the iris switch on the RCU (RCB) or on the
hybrid control panel is in the AUTO posi-
tion.
OFF:The iris control is invalid when the iris
switch on the RCU (RCB) or on the hybrid
control panel is in the AUTO position.
All Center Top cut BTM cut R/L cut
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3...")
-39- #0Auto Iris Level Fine Adjustment [Auto Iris Adjust: ON/OFF] ON:Fine adjustment of auto iris convergence level can be made with the iris control when the iris switch on the RCU (RCB) or on the hybrid control panel is in the AUTO posi- tion. OFF:The iris control is invalid when the iris switch on the RCU (RCB) or on the hybrid control panel is in the AUTO position. All Center Top cut BTM cut R/L cut R B R B PED TOTAL PED A BATW AWCAUTOHOLD ABC IRISMAN AUTO 1000 S/S ELC 500 100 OFF SHUTTER SCENE 21 3...
Page 42
![Page 42
-40-
#1Electronic Shutter Mode Setting [Shutter Mode:
Step/ ELC/ S/Scan]
Step:Electronic shutter operates at the speed
selected by the Electronic Shutter Step Setting
#2.
ELC:Electronic shutter is controlled to automatical-
ly adjust the luminance.
S/Scan (Synchro Scan):Electronic shutter oper-
ates at the speed selected in Electronic Shutter
Synchro-Scan Setting #3.
#3Electronic Shutter Synchro-Scan Setting
[Synchro Scan: 60.34 Hz - 15.75 kHz]
This setting is possible only when Electronic Shutter
Mode...](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-41.png "Page 42
-40-
#1Electronic Shutter Mode Setting [Shutter Mode:
Step/ ELC/ S/Scan]
Step:Electronic shutter operates at the speed
selected by the Electronic Shutter Step Setting
#2.
ELC:Electronic shutter is controlled to automatical-
ly adjust the luminance.
S/Scan (Synchro Scan):Electronic shutter oper-
ates at the speed selected in Electronic Shutter
Synchro-Scan Setting #3.
#3Electronic Shutter Synchro-Scan Setting
[Synchro Scan: 60.34 Hz - 15.75 kHz]
This setting is possible only when Electronic Shutter
Mode...")
-40- #1Electronic Shutter Mode Setting [Shutter Mode: Step/ ELC/ S/Scan] Step:Electronic shutter operates at the speed selected by the Electronic Shutter Step Setting #2. ELC:Electronic shutter is controlled to automatical- ly adjust the luminance. S/Scan (Synchro Scan):Electronic shutter oper- ates at the speed selected in Electronic Shutter Synchro-Scan Setting #3. #3Electronic Shutter Synchro-Scan Setting [Synchro Scan: 60.34 Hz - 15.75 kHz] This setting is possible only when Electronic Shutter Mode...
Page 43
![Page 43
Synchro-scan
-99.68 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
#4CCD Read Out Mode Setting [Field/Frame:
Field/Frame 1/Frame 2]
Field:CCD storage will be by field storage.
Frame 1:Vertical resolution increases in frame stor-
age.
Frame 2:Vertical resolution is raised without
increasing residual images by frame storage
and electronic shutter.
#5Gain Up Setting [Gain: AGC...](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-42.png "Page 43
Synchro-scan
-99.68 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
#4CCD Read Out Mode Setting [Field/Frame:
Field/Frame 1/Frame 2]
Field:CCD storage will be by field storage.
Frame 1:Vertical resolution increases in frame stor-
age.
Frame 2:Vertical resolution is raised without
increasing residual images by frame storage
and electronic shutter.
#5Gain Up Setting [Gain: AGC...")
Synchro-scan -99.68 Hz 250.0 Hz 492.2 Hz 984.4 Hz 1.969 kHz 3.938 kHz 7.875 kHz Shutter Speed OFF 1/100 1/250 1/500 1/1 000 1/2 000 1/4 000 1/10 000 Required luminance ratio 1 2 4 8 16 32 64 160 -41- #4CCD Read Out Mode Setting [Field/Frame: Field/Frame 1/Frame 2] Field:CCD storage will be by field storage. Frame 1:Vertical resolution increases in frame stor- age. Frame 2:Vertical resolution is raised without increasing residual images by frame storage and electronic shutter. #5Gain Up Setting [Gain: AGC...
Page 44
![Page 44
-42-
#6Black Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig-
nal can be set. Used in adjusting the black levels
of two or more cameras.
#7Chroma Level Adjustment
[Chroma Level: –3 - +3]
Chroma Level can be decreased or increased to
three levels.
#8White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW:The white balance is automatically adjusted
to the optimum position.
AWC A, AWC B:Color temperature conditions at
two points can be...](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-43.png "Page 44
-42-
#6Black Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig-
nal can be set. Used in adjusting the black levels
of two or more cameras.
#7Chroma Level Adjustment
[Chroma Level: –3 - +3]
Chroma Level can be decreased or increased to
three levels.
#8White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW:The white balance is automatically adjusted
to the optimum position.
AWC A, AWC B:Color temperature conditions at
two points can be...")
-42- #6Black Level Setting [Pedestal: –30 - +30] The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras. #7Chroma Level Adjustment [Chroma Level: –3 - +3] Chroma Level can be decreased or increased to three levels. #8White Balance Setting [White Bal: ATW/AWC A/ AWC B/P SET 3 200K/P SET 5 600K] ATW:The white balance is automatically adjusted to the optimum position. AWC A, AWC B:Color temperature conditions at two points can be...
Page 45
![Page 45
-43-
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3 USER
SET
AUTO/ATW
PAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$12-dimensional Lowpass Filter Setting [2D LPF:
OFF/ LOW/ HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
$2Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$3Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse...](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-44.png "Page 45
-43-
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3 USER
SET
AUTO/ATW
PAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$12-dimensional Lowpass Filter Setting [2D LPF:
OFF/ LOW/ HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
$2Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$3Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse...")
-43- R B R B PED TOTAL PED A BATW AWCAUTOHOLD ABC IRISMAN AUTO 1000 S/S ELC 500 100 OFF SHUTTER SCENE 21 3 USER SET AUTO/ATW PAINTINGGAIN R/B Gain Control RCU (RCB) R/B Pedestal Control $12-dimensional Lowpass Filter Setting [2D LPF: OFF/ LOW/ HIGH] The 2D lowpass filter that reduces moire and cross color can be set. $2Horizontal Phase Adjustment [H Phase: –206 - +49] Horizontal phase can be adjusted when a genlock signal is supplied. $3Subcarrier Phase Coarse Adjustment [SC Coarse: 1/2/3/4] Coarse...
Page 46
![Page 46
-44-
%3Skin Color Detail Level Setting [DTL Flesh Tone:
LOW/MID/HIGH]
LOW:Skin color coarseness is suppressed.
MID:Standard
HIGH:Skin color is emphasized.
%4Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $6is at HIGH or LOW.
%5Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare. $9Noise Suppress Compensation Level...](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-45.png "Page 46
-44-
%3Skin Color Detail Level Setting [DTL Flesh Tone:
LOW/MID/HIGH]
LOW:Skin color coarseness is suppressed.
MID:Standard
HIGH:Skin color is emphasized.
%4Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $6is at HIGH or LOW.
%5Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare. $9Noise Suppress Compensation Level...")
-44- %3Skin Color Detail Level Setting [DTL Flesh Tone: LOW/MID/HIGH] LOW:Skin color coarseness is suppressed. MID:Standard HIGH:Skin color is emphasized. %4Corner Detail Setting [Corner Detail: OFF/ON] Corner detail, which improves the resolution of cor- ners, can be turned on or off when the Detail Level Setting $6is at HIGH or LOW. %5Precision Detail Level Setting [Precision Detail: OFF/LOW/HIGH] This setting is to narrow detail width and suppress detail glare. $9Noise Suppress Compensation Level...
Page 47
![Page 47
-45-
%6Color Matrix Compensation Level Setting
[Matrix (R-G)/(R-B)/(G-R)/(G-B)/(B-R)/(B-G):
–31 - +31]
Color Matrix compensation level can be adjusted.
(R-G):To increase or decrease the intermediate
color between red and magenta
(R-B):To increase or decrease the intermediate
color between red and yellow
(G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and cyan...](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-46.png "Page 47
-45-
%6Color Matrix Compensation Level Setting
[Matrix (R-G)/(R-B)/(G-R)/(G-B)/(B-R)/(B-G):
–31 - +31]
Color Matrix compensation level can be adjusted.
(R-G):To increase or decrease the intermediate
color between red and magenta
(R-B):To increase or decrease the intermediate
color between red and yellow
(G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and cyan...")
-45- %6Color Matrix Compensation Level Setting [Matrix (R-G)/(R-B)/(G-R)/(G-B)/(B-R)/(B-G): –31 - +31] Color Matrix compensation level can be adjusted. (R-G):To increase or decrease the intermediate color between red and magenta (R-B):To increase or decrease the intermediate color between red and yellow (G-R):To increase or decrease the intermediate color between green and cyan (G-B):To increase or decrease yellowish green (B-R):To increase or decrease the intermediate color between blue and cyan...
Page 48
![Page 48
-46-
nSetting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K....](http://img.usermanuals.tech/thumb/58/68116/w300_aw-e600_en_om_d-47.png "Page 48
-46-
nSetting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K....")
-46- nSetting to initial setIn case of the wrong setting in any use mode, take the following steps to return to the initial settings. (1) Select [Initialize Data] on the main menu screen of each Use Mode. (See page 29.) Press the YES/ABC switch, then [Initialize Data] screen shown for about 10 seconds. (2) Press the YES/ABC switch within about 10 seconds to return to the initial settings, the existing settings ** Initialize Data ** (Halogen Mode) Do you want to initialize Halogen Mode settings? O.K....
Page 49
Item ±0 0 Top cut ON HIGH ---–10 MID G/L. Color Bar Set±0 1 ±0 7.5 IRE -47- nINITIAL SETTINGS OF THE SETTING ITEMS (Factory preset values)lHalogen, Fluorescent, Outdoor Mode Picture Level Light PEAK/AVG Light Area Auto ND (ELC) Auto Gain Up Manu Gain Up Pedestal Contrast (Gamma) Brightness Set Other SetShutter Speed Synchro Scan V Resolution Baud Rate Nega/Posi+2 ±0 ATW OFF Sharpness HIGH OFF OFF MID Auto ND ---Normal 9600bps PosiOutdoor mode +1 ±0 AWC A OFF ±0 1 ±0 7.5 IRE Sharpness HIGH OFF OFF MID...
Page 50
-48- lUser ModeIris, Shutter, Gain Set 0.45 88% 110% 0 0 0 OFF OFF 9600bps Posi HIGH +11 +12 +7 +6 2 3 0% 0 Picture Level Light PEAK/AVG Light Area Auto Iris Adjust Shutter Mode Step Synchro Scan Field/Frame Gain Pedestal±0 0 Top cut OFF Step OFF --- Field 0dB ±0 Chroma Level White Bal High-light Chroma Painting R Gain B Gain R Pedestal B Pedestal 2D LPF Color Set±0 AWC A OFF ±0 ±0 ±0 ±0 OFF H Phase SC Coarse SC Fine Color Bar Set G/L. Color Bar Set±0 1 ±0 7.5IRE Detail H Detail Level H V Detail Level H...