Panasonic Convertible Camera Aw E300 Operating Instructions
Here you can view all the pages of manual Panasonic Convertible Camera Aw E300 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
-39-
#0Auto Iris Level Fine Adjustment [Auto Iris Adust:
ON/OFF]
ON:Fine adjustment of auto iris convergence
level can be made with the iris control when
the iris switch on the RCU (RCB) or on the
hybrid control panel is in the AUTO posi-
tion.
OFF:The iris control is invalid when the iris
switch on the RCU (RCB) or on the hybrid
control panel is in the AUTO position.
ALL CENTER TOP CUT BOTTOM CUT R/L CUT
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-40.png "Page 41
-39-
#0Auto Iris Level Fine Adjustment [Auto Iris Adust:
ON/OFF]
ON:Fine adjustment of auto iris convergence
level can be made with the iris control when
the iris switch on the RCU (RCB) or on the
hybrid control panel is in the AUTO posi-
tion.
OFF:The iris control is invalid when the iris
switch on the RCU (RCB) or on the hybrid
control panel is in the AUTO position.
ALL CENTER TOP CUT BOTTOM CUT R/L CUT
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21...")
-39- #0Auto Iris Level Fine Adjustment [Auto Iris Adust: ON/OFF] ON:Fine adjustment of auto iris convergence level can be made with the iris control when the iris switch on the RCU (RCB) or on the hybrid control panel is in the AUTO posi- tion. OFF:The iris control is invalid when the iris switch on the RCU (RCB) or on the hybrid control panel is in the AUTO position. ALL CENTER TOP CUT BOTTOM CUT R/L CUT R B R B PED TOTAL PED A BATW AWCAUTOHOLD ABC IRISMAN AUTO 1000 S/S ELC 500 100 OFF SHUTTER SCENE 21...
Page 42
![Page 42
-40-
#1Electronic Shutter Mode Setting [Shutter Mode:
Step/ELC/Synchro Scan]
Step:Electronic shutter operates at the speed
selected by the Electronic Shutter Step Setting
#2.
ELC:Electronic shutter is controlled to automatical-
ly adjust the luminance.
Synchro Scan:Electronic shutter operates at the
speed selected in Electronic Shutter Synchro-
Scan Setting #3.
#2Electronic Shutter Step Setting
[Step: OFF/1/100 - 1/10 000]
This setting is possible only when Step is selected
in Electronic Shutter Mode...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-41.png "Page 42
-40-
#1Electronic Shutter Mode Setting [Shutter Mode:
Step/ELC/Synchro Scan]
Step:Electronic shutter operates at the speed
selected by the Electronic Shutter Step Setting
#2.
ELC:Electronic shutter is controlled to automatical-
ly adjust the luminance.
Synchro Scan:Electronic shutter operates at the
speed selected in Electronic Shutter Synchro-
Scan Setting #3.
#2Electronic Shutter Step Setting
[Step: OFF/1/100 - 1/10 000]
This setting is possible only when Step is selected
in Electronic Shutter Mode...")
-40- #1Electronic Shutter Mode Setting [Shutter Mode: Step/ELC/Synchro Scan] Step:Electronic shutter operates at the speed selected by the Electronic Shutter Step Setting #2. ELC:Electronic shutter is controlled to automatical- ly adjust the luminance. Synchro Scan:Electronic shutter operates at the speed selected in Electronic Shutter Synchro- Scan Setting #3. #2Electronic Shutter Step Setting [Step: OFF/1/100 - 1/10 000] This setting is possible only when Step is selected in Electronic Shutter Mode...
Page 43
![Page 43
Synchro-scan
-99.68 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
#4CCD Read Out Mode Setting [Field/Frame:
FIELD/FRAME 1/FRAME2]
FIELD:CCD storage will be by field storage.
FRAME 1:Vertical resolution increases in frame
storage.
FRAME 2:Vertical resolution is raised without
increasing residual images by frame storage
and 1/60-second shutter speed.
#5Gain Up Setting [Gain:...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-42.png "Page 43
Synchro-scan
-99.68 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
#4CCD Read Out Mode Setting [Field/Frame:
FIELD/FRAME 1/FRAME2]
FIELD:CCD storage will be by field storage.
FRAME 1:Vertical resolution increases in frame
storage.
FRAME 2:Vertical resolution is raised without
increasing residual images by frame storage
and 1/60-second shutter speed.
#5Gain Up Setting [Gain:...")
Synchro-scan -99.68 Hz 250.0 Hz 492.2 Hz 984.4 Hz 1.969 kHz 3.938 kHz 7.875 kHz Shutter Speed OFF 1/100 1/250 1/500 1/1 000 1/2 000 1/4 000 1/10 000 Required luminance ratio 1 2 4 8 16 32 64 160 -41- #4CCD Read Out Mode Setting [Field/Frame: FIELD/FRAME 1/FRAME2] FIELD:CCD storage will be by field storage. FRAME 1:Vertical resolution increases in frame storage. FRAME 2:Vertical resolution is raised without increasing residual images by frame storage and 1/60-second shutter speed. #5Gain Up Setting [Gain:...
Page 44
![Page 44
-42-
#6Black Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig-
nal can be set. Used in adjusting the black levels
of two or more cameras.
#7Chroma Level Adjustment
[Chroma Level: –3 - +3]
Chroma Level can be decreased or increased to
three levels.
#8White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW:The white balance is automatically adjusted
to the optimum position.
AWC A, AWC B:Color temperature conditions at
two points can be...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-43.png "Page 44
-42-
#6Black Level Setting [Pedestal: –30 - +30]
The black level (pedestal) of the luminance (Y) sig-
nal can be set. Used in adjusting the black levels
of two or more cameras.
#7Chroma Level Adjustment
[Chroma Level: –3 - +3]
Chroma Level can be decreased or increased to
three levels.
#8White Balance Setting [White Bal: ATW/AWC A/
AWC B/P SET 3 200K/P SET 5 600K]
ATW:The white balance is automatically adjusted
to the optimum position.
AWC A, AWC B:Color temperature conditions at
two points can be...")
-42- #6Black Level Setting [Pedestal: –30 - +30] The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras. #7Chroma Level Adjustment [Chroma Level: –3 - +3] Chroma Level can be decreased or increased to three levels. #8White Balance Setting [White Bal: ATW/AWC A/ AWC B/P SET 3 200K/P SET 5 600K] ATW:The white balance is automatically adjusted to the optimum position. AWC A, AWC B:Color temperature conditions at two points can be...
Page 45
![Page 45
-43-
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3 USER
SET
AUTO/ATW
PAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$1Color Bar Setup Setting [Color Bar Set: 0.0IRE/
7.5IRE]
The setup level of color bar can be adjusted.
$2Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$3Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarrier phase can...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-44.png "Page 45
-43-
R
B
R
B PED
TOTAL
PED
A
BATW
AWCAUTOHOLD
ABC
IRISMAN
AUTO
1000
S/S
ELC 500
100
OFF
SHUTTER SCENE
21
3 USER
SET
AUTO/ATW
PAINTINGGAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$1Color Bar Setup Setting [Color Bar Set: 0.0IRE/
7.5IRE]
The setup level of color bar can be adjusted.
$2Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$3Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarrier phase can...")
-43- R B R B PED TOTAL PED A BATW AWCAUTOHOLD ABC IRISMAN AUTO 1000 S/S ELC 500 100 OFF SHUTTER SCENE 21 3 USER SET AUTO/ATW PAINTINGGAIN R/B Gain Control RCU (RCB) R/B Pedestal Control $1Color Bar Setup Setting [Color Bar Set: 0.0IRE/ 7.5IRE] The setup level of color bar can be adjusted. $2Horizontal Phase Adjustment [H Phase: –206 - +49] Horizontal phase can be adjusted when a genlock signal is supplied. $3Subcarrier Phase Coarse Adjustment [SC Coarse: 1/2/3/4] Coarse adjustment of subcarrier phase can...
Page 46
![Page 46
-44-
%2Skin Color Detail Level Setting [DTL Flesh Tone:
LOW/MID/HIGH]
LOW:Skin color coarseness is suppressed.
MID:Standard
HIGH:Skin color is emphasized.
%3Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $5is at HIGH or LOW.
%4Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare. $8Noise Suppress Compensation Level...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-45.png "Page 46
-44-
%2Skin Color Detail Level Setting [DTL Flesh Tone:
LOW/MID/HIGH]
LOW:Skin color coarseness is suppressed.
MID:Standard
HIGH:Skin color is emphasized.
%3Corner Detail Setting [Corner Detail: OFF/ON]
Corner detail, which improves the resolution of cor-
ners, can be turned on or off when the Detail Level
Setting $5is at HIGH or LOW.
%4Precision Detail Level Setting [Precision Detail:
OFF/LOW/HIGH]
This setting is to narrow detail width and suppress
detail glare. $8Noise Suppress Compensation Level...")
-44- %2Skin Color Detail Level Setting [DTL Flesh Tone: LOW/MID/HIGH] LOW:Skin color coarseness is suppressed. MID:Standard HIGH:Skin color is emphasized. %3Corner Detail Setting [Corner Detail: OFF/ON] Corner detail, which improves the resolution of cor- ners, can be turned on or off when the Detail Level Setting $5is at HIGH or LOW. %4Precision Detail Level Setting [Precision Detail: OFF/LOW/HIGH] This setting is to narrow detail width and suppress detail glare. $8Noise Suppress Compensation Level...
Page 47
![Page 47
-45-
%5Color Matrix Compensation Level Setting
[Matrix (R-G) / (R-B) / (G-R) / (G-B) / (B-R) / (B-G):
–31 - +31]
Color Matrix compensation level can be adjusted.
(R-G):To increase or decrease the intermediate
color between red and magenta
(R-B):To increase or decrease the intermediate
color between red and yellow
(G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-46.png "Page 47
-45-
%5Color Matrix Compensation Level Setting
[Matrix (R-G) / (R-B) / (G-R) / (G-B) / (B-R) / (B-G):
–31 - +31]
Color Matrix compensation level can be adjusted.
(R-G):To increase or decrease the intermediate
color between red and magenta
(R-B):To increase or decrease the intermediate
color between red and yellow
(G-R):To increase or decrease the intermediate
color between green and cyan
(G-B):To increase or decrease yellowish green
(B-R):To increase or decrease the intermediate
color between blue and...")
-45- %5Color Matrix Compensation Level Setting [Matrix (R-G) / (R-B) / (G-R) / (G-B) / (B-R) / (B-G): –31 - +31] Color Matrix compensation level can be adjusted. (R-G):To increase or decrease the intermediate color between red and magenta (R-B):To increase or decrease the intermediate color between red and yellow (G-R):To increase or decrease the intermediate color between green and cyan (G-B):To increase or decrease yellowish green (B-R):To increase or decrease the intermediate color between blue and...
Page 48
![Page 48
-46-
nSetting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K. : YES SW
Cancel : NO SW
Halogen Mode
Initialized
Halogen Mode
unchanged
qwe
(2) Press the YES/ABC switch...](http://img.usermanuals.tech/thumb/58/68112/w300_aw-e300_en_om_d-47.png "Page 48
-46-
nSetting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K. : YES SW
Cancel : NO SW
Halogen Mode
Initialized
Halogen Mode
unchanged
qwe
(2) Press the YES/ABC switch...")
-46- nSetting to initial setIn case of the wrong setting in any use mode, take the following steps to return to the initial settings. (1) Select [Initialize Data] on the main menu screen of each Use Mode. (See page 29.) Press the YES/ABC switch, then [Initialize Data] screen shown for about 10 seconds. ** Initialize Data ** (Halogen Mode) Do you want to initialize Halogen Mode settings? O.K. : YES SW Cancel : NO SW Halogen Mode Initialized Halogen Mode unchanged qwe (2) Press the YES/ABC switch...
Page 49
Other Set G/L. Color Bar SetPicture Level Light PEAK/AVG) Light Area Auto ND (ELC) Auto Gain Up Manu Gain Up Pedestal Contrast (Gamma) Shutter Speed Synchroscan V Resolution Baud Rate Nega/Posi -47- ItemnINITIAL SETTINGS OF THE SETTING ITEMS (Factory preset values)lHalogen, Fluorescent, Outdoor Mode +1 ±0 ATW OFF ±0 1 ±0 7.5IRE Sharpness OFF OFF MID Auto ND---Normal 9 600 bps Posi ±0 0 Top Cut ON HIGH---–10 MIDOutdoor mode +1 ±0 AWC A OFF ±0 1 ±0 7.5IRE Sharpness OFF OFF MID OFF ---Normal 9 600 bps Posi...
Page 50
0.45 88 % 110 % 0 0 0 OFF OFF 9 600 bps Posi OFF +11 +12 +7 +6 2 3 0 % 0 Iris, Shutter, Gain Set -48- lUser Mode Picture Level Light PEAK/AVG) Light Area Auto Iris Adjust Shutter Mode Step SyncroScan Field/Frame Gain Pedestal±0 0 Top Cut OFF Step OFF --- Field 0 dB ±0 Chroma Level White Bal High-light Chroma Painting R Gain B Gain R Pedestal B Pedestal Color Set±0 AWC A OFF ±0 ±0 ±0 ±0 H Phase SC Coarse SC Fine Color Bar Set G/L. Color Bar Set±0 1 ±0 7.5IRE Detail H Detail Level H V Detail Level H H...