Panasonic Compact Stereo System Sc-hc58 Operating Instructions
Have a look at the manual Panasonic Compact Stereo System Sc-hc58 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 RQT9754 ENGLISH “CANNOT SET” ≥Select an audio source other than “AIRPLAY” or “BLUETOOTH”. “CHECKING CONNECTION” ≥The unit is checking the connected iPod/iPhone/iPad. ≥If this display keeps appearing, make sure that the battery of the iPod/iPhone/iPad is not depleted and that the iPod/iPhone/iPad is turned on and connected correctly (l7). “DIMMER” ≥Appears 10 seconds after the volume is turned to “0”. “DL ERROR” ≥The software download has failed. Press any button to exit. Please try again later. ≥The server cannot be found. Press any button to exit. Make sure that the wireless network is connected to the Internet. “ERROR” ≥Incorrect operation is performed. Read the instructions and try again. “F ” (“ ” stands for a number.) ≥There is a problem with this unit. Note down the displayed number, disconnect the AC power supply cord and consult your dealer. “FAIL” ≥Updating or setting has failed. Read the instructions and try again. “ILLEGAL OPEN” ≥Sliding door is not in correct position. Turn the unit off and on again. If this display appears again, consult the dealer. “IPOD_DOCK OVER CURRENT ERROR” “IPOD_PORT OVER CURRENT ERROR” ≥The iPod/iPhone/iPad is drawing too much power. Disconnect the iPod/iPhone/iPad and turn the unit off and on again. “LEVEL 0” ≥There is no link between this unit and the wireless network router. Try the following operations: – Check that the wireless network router is turned on. – Turn this unit off and on again. – Reset the wireless network settings. (l8) If the problem persists, consult your dealer. “LEVELj” ≥When “D.CONNECT” is set to “ON” the Wi-Fi signal strength cannot be checked. To check the Wi-Fi signal strength from the wireless network router, set “D.CONNECT” to “OFF”. (l12) “LINKING” ≥This unit is communicating with the wireless network router to complete the network settings. Depending on the wireless network router this process may take a few minutes. Try moving this unit closer to the wireless network router. “NOCONNECT” ≥This unit is not connected to the network. Check the network connection. (l8) “NODEVICE” ≥The iPod/iPhone/iPad device is not inserted correctly. Read the instructions and try again (l7). ≥The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/iPhone/iPad and turn it on before connecting. “NO DISC” ≥Insert a disc to be played (l7). “NO PLAY” ≥A CD that is not in CD-DA format is inserted. It cannot be played. “NOT SUPPORTED” ≥You have connected an iPod/iPhone/iPad that cannot be played (l23). ≥If the iPod/iPhone/iPad is compatible, turn it on and connect it correctly. ≥The connected iPod touch/iPhone/iPad is not connected to a wireless network. Connect it to a wireless network and try again. (l8) “READING” ≥The unit is checking the CD information. After this display has disappeared, start operating. “REMOTE” (“ ” stands for a number.) ≥The remote control and this unit are using different codes. Change the code on the remote control. – When “REMOTE 1” is displayed, press and hold [OK] and [ ] for more than 4 seconds. – When “REMOTE 2” is displayed, press and hold [OK] and [CD/RADIO] for more than 4 seconds. “SET WI-FI” ≥The connected iPod touch/iPhone/iPad is not connected to a wireless network. Connect it to a wireless network and try again. (l8) SC-HC58~RQT9754.book Page 21 Tuesday, December 18, 2012 4:40 PM
22 RQT9754 Specifications ∫GENERAL ∫AMPLIFIER SECTION ∫TUNER SECTION∫DISC SECTION ∫SPEAKER SYSTEM SECTION ∫TERMINAL SECTION ∫Wi-Fi / AirPlay SECTION ∫BLUETOOTH SECTION ≥Specifications are subject to change without notice. Mass and dimensions are approximate. ≥Total harmonic distortion is measured by a digital spectrum analyzer. *1: When the iPod/iPhone/iPad is not charging and the dock is closed. Power consumption38 W Power consumption in standby mode* 1 Approx. 0.1 W Power consumption in standby mode (With the iPod dock open) Approx. 0.4 W (With “NET STNBY” set to “ON”) Approx. 6.3 W Power supplyAC 120 V, 60 Hz Dimensions (WkHkD) 500 mmk204 mmk84 mm (19 11/16qk81/32qk35/16q) (Depth without stand: 75 mm (3q)) Mass (Weight) Approx. 2.6 kg(5.7 lbs) Operating temperature range 0oCtor40oC(r32 oF to r104oF) Operating humidity range 35 % to 80 % RH (no condensation) Output power: RMS Output Power Stereo mode Front Ch (both ch driven) 20 W per channel (6≠), 1 kHz, 10 % THD Total RMS Stereo mode power 40 W FTC Output Power Stereo mode Front Ch (both ch driven) 15 W per channel (6≠), 20 Hz to 20 kHz, 1 % THD Total FTC Stereo mode power 30 W Preset MemoryFM 30 stations Frequency Modulation (FM) Frequency range 87.9 MHz to 107.9 MHz (200 kHz step) 87.5 MHz to 108.0 MHz (100 kHz step) Antenna terminals 75≠(unbalanced) Disc played [8 cm (3q) or 12 cm (5q)] CD, CD-R/RW (CD-DA) Pick up Wavelength 790 nm (CD) Audio output (Disc) Number of channels2 ch (FL, FR) Ty p e 1 way, 1 speaker system (Passive Radiator) Speaker unit(s) Full range 6.5 cm (2 1/2q) Cone typek1 per channel Passive Radiator 8cm(3 1/8q)k2 per channel Impedance6≠ “IPOD_DOCK” connection DCOUT 5V, 1.0A MAX “IPOD_PORT” connection DCOUT 5V, 2.1A MAX Phone jack Te r m i n a lStere o, ‰3.5 mm ( 1/8q) jack Wi-Fi WLAN StandardsIEEE802.11b/g Frequency range2.4 GHz band SecurityWEP, WPA TM, WPA2TM WPS version Version 2.0 (WEP not support) Bluetooth ® system specificationV3.0 Wireless equipment classificationClass 2 Supported profilesA2DP, AVRCP, GAVDP Frequency band2402 MHz to 2480 MHz (Adaptive Frequency Hopping) Driving distance10 m (33 ft) Line of sight SC-HC58~RQT9754.book Page 22 Tuesday, December 18, 2012 4:40 PM
23 RQT9754 ENGLISH Playable media Compatible with “IPOD_DOCK” connection (Using Lightning connector) Compatible with “IPOD_PORT” connection [Using dedicated USB cable (not supplied)] (as of December 2012) ≥Compatibility depends on the software version. Update your iPod/iPhone/iPad to the latest software before using it with this unit. ≥Please be aware that Panasonic accepts no responsibility for the loss of data and/or information. ≥A disc with the CD Logo. ≥This unit can play back discs that conform to the CD-DA format. ≥The unit may not be able to play some discs due to the condition of the recording. ≥This unit cannot play back MP3 files. Note about using a DualDisc≥The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play may not be possible. ≥Do not use a DualDisc in this unit as it may not be possible to insert it correctly and it may get scratched or scraped.(as of December 2012) Note about using AirPlay ≥Simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions. ≥For up to date compatibility information on your wireless network router refer to http://panasonic.jp/support/global/cs/ (This site is in English only.) Compatible iPod/iPhone/iPad iPod touch (5th generation) iPod nano (7th generation) iPhone 5 iPod touch 1st, 2nd, 3rd, 4th, and 5th generation iPod nano2nd, 3rd, 4th, 5th, 6th, and 7th generation iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G / iPhone iPad (3rd, and 4th generation) / iPad 2 / iPad iPad mini Compatible CD Compatible AirPlay devices iOS 4.3.3 or later iPod touch 3rd, 4th, and 5th generation iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS iPad (3rd, and 4th generation) / iPad 2 / iPad iPad mini iTunes 10.2.2 or later (Mac / PC) SC-HC58~RQT9754.book Page 23 Tuesday, December 18, 2012 4:40 PM
24 RQT9754 Attaching the unit to a wall (optional) This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 k g (72.8 lbs). The screws and other items are not supplied as the type and size will vary with each installation. ≥ Refer to step 3 of “Wall mount instructions” for details about the required screws. ≥ Be sure to attach the fall prevention cord as a secondary safety measure. ∫ Supplied accessories ≥1 Safety holder ≥ 1 Screw ≥ 2 Wall mount brackets ∫ Additionally required accessories (commercially available) ≥4 Wall mount bracket fixing screws ≥ 1 Safety holder fixing screw ≥ 1 Fall prevention cord* ≥ 1 Screw eye * Use a cord that is capable of supporting over 33 k g (72.8 lbs) (with a diameter of about 1.5 mm (1/16q )). 1Detach the stand from the unit. {.Unscrew the fixing screw (2 pieces) at the bottom of the unit. {.Gently pull the stand off the unit as illustrated. ≥ Keep the removed screws and stand in a safe place. 2Measure and mark the position of the wall mount brackets (Both sides). {.Use figures below to identify the screwing positions. The position to attach the wall mount brackets Installation accessories ≥Keep the safety holder out of reach of children to prevent swallowing. ≥ Keep the screws out of reach of children to prevent swallowing. ≥ Keep the wall mount brackets out of reach of children to prevent swallowing. Safety precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. ≥Be sure to install this unit as indicated within this Owner’s Manual. Wall mount instructions Before installation, turn the unit off and disconnect the AC power supply cord from the AC outlet. Before deciding the location to place the unit, be sure to check that the Wi-Fi signal strength is sufficient. ( l8, 18) Bottom of the unit Stand Soft blanket or cloth Fixing screw 202 mm (8 q) 12.5 mm ( 1/2q ) SC-HC58~RQT9754.book Page 24 Thursday, December 20, 2012 11:34 AM
25 RQT9754 ENGLISH 3Attach the wall mount bracket to the wall with 2 screws (not supplied). (Both sides) ≥Use a level to ensure both wall mount brackets are level. 4Fix the safety holder onto the unit with the screw (supplied). {.Screw tightening torque: 50 N 0cm (0.4 lbf0ft) to 70 N 0cm (0.5 lbf 0ft). 5Attach the fall prevention cord (not supplied) to this unit. 6Hook the unit securely onto the wall mount brackets with both hands. ≥Connect the FM antenna and the AC power supply cord to the unit before hanging the unit onto the wall. ( l6) ≥ After hanging the unit, release your hands carefully to confirm the unit sits securely on the wall. 7Drive the safety holder fixing screw (not supplied) to secure the safety holder onto the wall. ≥Refer to step 3 for requirements before screwing. 8Attach the fall prevention cord (not supplied) to the wall. ≥Make sure that the slack of the cord is minimal. 300 mm (1113/16q) 232 mm (9 7/8q) 700 mm (27 1/2q ) 66 mm (2 5/8q ) 202 mm (8q) 125 mm (4 7/8q ) 143 mm (5 5/8q ) 500 mm (19 5/8q)11 8 m m (4 5/8q ) 30 mm (11/8q ) Space required At least 30 mm (13/16q) ‰ 7.5 mm ( 19/64q) to ‰ 9.4 mm ( 3/8q) ‰ 4 mm (5/32q ) Wall mount bracket Screw (supplied) Cord (not supplied) Wall Safety holder fixing screw (not supplied)Safety holder Fixed to the wall Cord (not supplied) Screw eye (not supplied) Wall RQT9754~body1_mst.fm Page 25 Thursday, December 20, 2012 11:52 AM
26 RQT9754 Licenses “Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. “Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance. The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. SC-HC58~RQT9754.book Page 26 Tuesday, December 18, 2012 4:40 PM
27 RQT9754 ESPAÑOL ENGLISH Conexiones ≥Consumo de energía en Standby (modo de espera): Aprox. 0,1 W Inser tar o sacar los medios Operaciones de reproducción de medios Preparación≥Encienda la unidad. ≥Inserte el medio. (larriba) ≥Presione [CD] o [iPod] para seleccionar la fuente de audio. Reloj y temporizador Éste es un reloj de 12 horas. 1Presione [SETUP] repetidamente para seleccionar “CLOCK”. 2Presione [3,4] para seleccionar la hora y luego presione [OK]. Spanish Quick Reference / Referencia rápida en español 1 2 Cinta adhesiva (no suministrado) Antena interior FM (suministrado) Conecte el cable de alimentación AC después de que todas las demás conexiones estén completas. Hacia el tomacorriente AC Cable de alimentación AC (suministrado) iPad Reproducción básica ReproducirPresione [1/;]. DetenciónPresione [∫]. PausaPresione [1/;]. Presione nuevamente para reiniciar la reproducción. SaltearPresione [:/6] o [5/9] para saltear una pista. BúsquedaDurante la reproducir o pausa Mantenga presionado [:/6] o [5/9]. Ajuste del reloj SC-HC58~RQT9754.book Page 27 Tuesday, December 18, 2012 4:40 PM
28 RQT9754 SC-HC58~RQT9754.book Page 28 Tuesday, December 18, 2012 4:40 PM
29 RQT9754 SC-HC58~RQT9754.book Page 29 Tuesday, December 18, 2012 4:40 PM
30 RQT9754 Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Products Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”. Mail-In ServiceFor assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to: Panasonic Exchange Center 4900 George McVay Drive Suite B McAllen, TX 78503 [email protected] Online Repair RequestTo submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair. When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. As of October 2012 Product or Part Name Parts Labor Compact Stereo System 1 Year 1 Year All included Accessories (Except Non-Rechargeable Batteries)90 Days Not Applicable Only Non-Rechargeable Batteries 10 Days Not Applicable Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262) Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com Or, send your request by E-mail to: [email protected] You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-Friday 9am-9pm EST) Panasonic National Parts Center 20421 84th Ave S., Kent, WA 98032 (We accept Visa, MasterCard, Discover Card, American Express) For hearing or speech impaired TTY users, TTY: 1-866-605-1277 The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SC-HC58 SERIAL NUMBER User memo: DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER SC-HC58~RQT9754.book Page 30 Tuesday, December 18, 2012 4:40 PM