Panasonic Compact Stereo System Sc-hc58 Operating Instructions

							11
RQT9754
ENGLISH
Using AirPlay with this unit’s speakers
1Turn the unit on.
≥Check that the Wi-Fi status indicator lights in 
blue.
≥If it doesn’t light in blue, check the wireless 
network settings. (l8)
2iOS device: 
Start the “Music” (or iPod) app.
Mac/PC: 
Sta r t  “iTunes”.
≥If the Music app on your iOS device is used, select 
the audio file you want to play.
3Select “Panasonic HC58 _ _ _ _ _ _”*1, 2 from 
the AirPlay   icon.
{.Check the volume settings before starting the 
playback. (When AirPlay is used for the first time, 
the volume may be output at the maximum setting.)
4Start play.
≥The playback will start with a slight delay.
	≥This unit can be set to turn on automatically when this unit is selected as the output speakers. (l18)
≥Playback of other audio sources will stop and AirPlay output will have priority.
≥Volume changes on the iOS device or iTunes will be applied to this unit. 
(Refer to the iTunes Help for the required settings in iTunes.)
≥With some iOS and iTunes versions, it may not be possible to restart the AirPlay playback if the selector is changed 
(e.g., “CD”) or the unit is turned off, during the AirPlay playback.
In this case, select a different device from the AirPlay icon of the Music App or iTunes and then re-select this unit as the 
output speakers.
≥AirPlay will not work when playing back videos on iTunes.
*1: “ _ ” stands for a digit that is unique to each set.
*2: The name that is displayed for this unit can be changed from the “Edit STEREO SYSTEM name” settings. 
(l10, “Advanced network settings”)
Preparation≥Complete the network settings. (l8)
≥Connect the iOS device or Mac/PC to the same 
home wireless network as this unit.
Lights in blue
e.g., 
iPhone iOS 6.0.1
e.g., 
iTunes 11.0
SC-HC58~RQT9754.book  Page 11  Tuesday, December 18, 2012  4:40 PM 
						

							12
RQT9754
With this function set to “ON”, you can stream 
music from the iOS device or 
Mac / PC (iTunes 10.2.2 or later) to this unit without 
the need of a wireless network router.
≥Previous network settings will be deleted when 
this function is set to “ON”.
≥The following explanations are based on an 
iPhone.
1Press [SETUP] repeatedly to select 
“D.CONNECT”.
2Press [3,4] to select “ON” and then press 
[OK].
3Press [3,4] to select “OK? YES” and then 
press [OK].
4Connect your iPhone to this unit’s wireless 
network named “HC58 _ _ _ _ _ _”*2.
5Enter the password that is indicated on this 
unit’s display.
6Once the iPhone is connected to this unit’s 
wireless network, the setup is competed.
7Continue to step 2 of “Using AirPlay with this 
unit’s speakers” 
(l11).
	
≥This setting is reset to “OFF” when other network 
settings are performed. (l8)
≥When “D.CONNECT” is set to “ON”, this unit will not be 
connected to the Internet. It is not possible to update the 
software or check the Wi-Fi signal strength.
≥When AirPlay is not being used, disconnect the AirPlay 
compatible device from this network.
≥When using a computer on this network, make sure that 
all the shared files are encrypted.
≥This feature is only compatible with the “Open System” 
authentication method. It is not compatible with “Shared 
Key” authentication method.
The first time “D.CONNECT” is set to “ON”, a 
password for this unit’s wireless network is 
randomly created and memorized in this unit.
≥This password is memorized until it is changed.
1 While “D.CONNECT” is set to “ON”:
Press [SETUP] repeatedly to select 
“D.CONNECT”.
2Press [3,4] to select “ON” and then press 
[OK].
3 The current password is displayed.
≥The 5 digits after PW is the password for 
this network.
4 Press any button to exit.
1 While “D.CONNECT” is set to “OFF”:
Press [SETUP] repeatedly to select 
“D.CONNECT”.
2Press [3,4] to select “CHANGE PW” and 
then press [OK].
3Press [3,4] to select “OK? YES” and then 
press [OK].
4 The new password is displayed.
≥The 5 digits after PW is the new password 
for this network.
5 Press any button to exit.
∫Note about changing the password
After changing this unit’s wireless network 
password, if you are not prompted to change the 
password on the other devices, the following 
changes are required.
iOS device (iPod touch/iPhone/iPad)*
3:
≥Before choosing this unit’s network,
1 Select [ ] located beside this unit’s wireless 
network name.
2 Select “Forget this Network” and then select 
“Forget”.
3 Select this unit’s wireless network and enter the 
new password.
Mac/PC:
≥If the computer has memorized the old password, 
be sure to change the memorized password for 
this unit’s wireless network to the new one.
	
≥Refer to the devices’s operating instructions for details.
*1: “ _ ” stands for a digit
*2: “ _ ” stands for a digit that is unique to each set.
*3: Steps are based on iOS 6.0.1.
Directly streaming to this unit
“PW _ _ _ _ _”*1 is displayed.
The 5 digits after PW is the password for this 
network.

@
@
@
@
@
@

@
@
@
@
@
@
Display the password
Change the password
SC-HC58~RQT9754.book  Page 12  Tuesday, December 18, 2012  4:40 PM 
						

							13
RQT9754
ENGLISH
Bluetooth® operations
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this 
unit wirelessly.
Preparation
≥Turn on the Bluetooth
® feature of the device and 
place the device near this unit.
≥If this unit is already connected to a Bluetooth
® 
device, disconnect it.
1Press [ ] to select “BLUETOOTH”.
≥If “PAIRING” is indicated on the display, go to step 3.
2Press [PLAY MENU] to select “NEW DEV.” and 
then press [OK].
{.“PAIRING” is indicated on the display.
3Select “SC-HC58” from the Bluetooth® device’s 
Bluetooth® menu.
4Start play on the Bluetooth® device.
	≥Refer to the operating instructions of the Bluetooth® 
device for details.
If prompted for the passkey, input “0000”.
≥You can register up to 8 devices with this unit. If a 9th 
device is paired, the device that has not been used for 
the longest time will be replaced.
Preparation
≥Turn on the Bluetooth® feature of the device and 
place the device near this unit.
≥If this unit is already connected to a Bluetooth
® 
device, disconnect it.
1Press [ ] to select “BLUETOOTH”.
{.“READY” is indicated on the display.
2Select “SC-HC58” from the Bluetooth® device’s 
Bluetooth® menu.
{.The name of the connected device is indicated on 
the display for 2 seconds.
3Start play on the Bluetooth® device.
	≥This unit can only be connected to one device at a time.
≥When “BLUETOOTH” is selected as the source, this unit 
will automatically try and connect to the last connected 
Bluetooth
® device. The Bluetooth® device will be 
disconnected if a different audio source (e.g., [CD]) is 
selected.
You can change the transmission speed to prioritize 
transmission quality or sound quality.
Preparation
≥Press [ ] to select “BLUETOOTH”.
≥If a Bluetooth
® device is already connected, 
disconnect it.
1Press [PLAY MENU] repeatedly to select 
“LINK MODE”.
2Press [3,4] to select the mode and then 
press [OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
	≥The default setting is “MODE 1”.
If the sound input level of the Bluetooth® 
transmission is too low, change the input level 
setting.
Preparation
≥Connect a Bluetooth
® device.
1Press [PLAY MENU] repeatedly to select 
“INPUT LEVEL”.
2Press [3,4] to select the level and then press 
[OK].
“LEVEL 0” 
,. “LEVELi1” ,. “LEVELi2”
^---------------------------------------------------------------J
	≥Select “LEVEL 0” if the sound is distorted.
≥The default setting is “LEVEL 0”.
1While a Bluetooth® device is connected:
Press [PLAY MENU] to select 
“DISCONNECT?”.
2Press [3,4] to select “OK? YES” and then 
press [OK].
Pairing Bluetooth® devices
Connecting a paired Bluetooth® 
device
Bluetooth® transmission mode
Bluetooth® input level
Disconnecting a Bluetooth® device
SC-HC58~RQT9754.book  Page 13  Tuesday, December 18, 2012  4:40 PM 
						

							14
RQT9754
Media playback operations
The following marks indicate the availability of the 
feature.
Preparation
≥Turn the unit on.
≥Insert the media (l7) or connect the Bluetooth
® 
(l13) / AirPlay (l11) compatible device.
≥Press [CD], [iPod] or [ ] to select the audio 
source.
[CD] [Bluetooth] To display information
Press [DISPLAY] repeatedly.
	
≥To use this unit’s remote control with a Bluetooth® 
device, the Bluetooth® device must support AVRCP 
(Audio Video Remote Control Profile).
Depending on the device or the status of the device, 
some operations may not work.
[iPod] To navigate through the iPod/iPhone 
menu
≥Open the Music App to use this feature with iPod touch/
iPhone.
–[3,4] : To navigate menu items.
– [OK] : To go to the next menu.
– [iPod MENU] : To return to the previous menu.
	
≥To view the operation, open the sliding door.
≥The operation may vary among iPod/iPhone/iPad 
models.
≥Depending on the model (e.g., iPod nano 7th 
generation, etc.) it may be necessary to select the 
album, artist, etc. on the iPod/iPhone/iPad.
Select the playback mode.
1Press [PLAY MENU] to select “REPEAT” or 
“RANDOM” / “SHUFFLE”.
2Press [3,4] to select the setting and then 
press [OK].
	
≥When using an iPod/iPhone/iPad or Bluetooth® device, 
use the setting on the device, if available.
≥During random/shuffle play, you cannot skip to the 
previous track.
≥[CD] :The mode is canceled when you open the sliding 
door for discs.
[AirPlay] : The applied settings will remain until it is 
changed.
*1:[AirPlay] Perform the settings during playback.
[CD] :  CD audio in CD-DA format
[iPod] :  Compatible iPod/iPhone/iPad (l23)
[AirPlay] :  When connected to an AirPlay 
compatible device. (l11 )
[Bluetooth] :  Connected Bluetooth
® device (l13)
Basic play
(
[CD], [iPod], [AirPlay], [Bluetooth])
Play Press [1/;].
Stop Press [∫].
Pause Press [1/;].
Press again to restart play.
Skip Press [:/6] or [5/9] 
to skip track.
Search(Except [AirPlay])During play or pause
Press and hold [:/6] or 
[5/9].
≥[iPod] : Backwards search is only 
within the current track.
Playback modes ([CD], [AirPlay] *1)
REPEAT
[CD]
OFF: Select to cancel repeat 
playback.
1-TRACK: Only plays the selected track.≥“1, ”, “`” is displayed.(Skip to the desired track)
ALL: All tracks are repeated.≥“`” is displayed.
[AirPlay]
Refer to the connected device to verify the 
selected setting.
[CD] RANDOM
ON: Plays the contents randomly.≥“RND” is displayed.
≥“RND” will not be displayed when 
“1-TRACK” is selected.
OFF: Random playback is turned off.
[AirPlay] SHUFFLE
Refer to the connected device to verify the 
selected setting.
SC-HC58~RQT9754.book  Page 14  Tuesday, December 18, 2012  4:40 PM 
						

							15
RQT9754
ENGLISH
Listening to the radio
You can preset up to 30 channels.
Preparation
≥Make sure that the FM antenna is connected. 
(l6)
≥Turn the unit on.
≥Press [RADIO] to select “FM”.
	A station previously stored is overwritten when another 
station is stored in the same channel preset.
1Press [PLAY MENU] to select “A.PRESET”.
2Press [3,4] to select “LOWEST” or 
“CURRENT” and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency 
(FM 87.9 or FM 87.5).
CURRENT:
To begin auto preset with the current 
frequency.*
* To change the frequency, refer to “Manual tuning and 
presetting”.
The tuner starts to preset all the stations it can 
receive into the channels in ascending order.
Preparation
1Press [PLAY MENU] repeatedly to select 
“TUNEMODE”.
2Press [3,4] to select “PRESET” and then 
press [OK].
Press [:/6] or [5/9] to select the 
channel.
∫Manual tuning and presetting
Select a radio broadcast.
1Press [PLAY MENU] repeatedly to select 
“TUNEMODE”.
2Press [3,4] to select “MANUAL” and then 
press [OK].
3Press [:/6] or [5/9] to tune to the 
required station.
≥To start automatic tuning, press and hold 
[:/6], [5/9] until the frequency starts 
scrolling. Tuning stops when a station is found.
To preset the channel
4While listening to the radio broadcast
Press [OK].
5Press [3,4] to select the channel and then 
press [OK].
∫To improve FM sound quality
1While receiving FM broadcasts, press 
[PLAY MENU] repeatedly to select “FM 
MODE”.
2Press [3,4] to select “MONO” and then press 
[OK].
≥This setting can be preset and memorized. To do 
so, continue to step 4 of “Manual tuning and 
presetting”.
	≥Select “STEREO” in step 2 to return to stereo 
broadcasts.
≥“MONO” is canceled if the frequency is changed.
≥If “MONO” is selected, regardless of the type of signal 
this unit is receiving, “FM MONO” is displayed when 
[DISPLAY] is pressed. (lbelow)
∫To display the current signal status
Press [DISPLAY].
	≥“STEREO” is displayed when this unit tunes to a stereo 
broadcast.
Presetting stations automatically
Listening to a preset channel
“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
≥“FM” is also displayed even if this unit is not 
tuned to a station.
SC-HC58~RQT9754.book  Page 15  Tuesday, December 18, 2012  4:40 PM 
						

							16
RQT9754
Sound adjustment
The following sound effects can be added to the 
audio output.
1Press [SOUND] repeatedly to select the effect.
2Press [3,4] to select the setting and then 
press [OK].
≥You may experience a reduction in sound quality when 
these effects are used with some sources. If this occurs, 
turn the sound effects off.
Clock and Timer
This is a 12-hour clock.
1Press [SETUP] repeatedly to select “CLOCK”.
2Press [3,4] to set the time and then press 
[OK].
	≥To display the clock, press [SETUP] to select “CLOCK” 
and then press [OK] once. The time is displayed for 10 
seconds.
(During standby, press [DISPLAY] once.)
≥The clock is reset when there is a power failure or when 
the AC power supply cord is removed.
≥Reset the clock regularly to maintain accuracy.
*1: “CD”, “IPOD_DOCK”, “IPOD_PORT” and “FM” can be 
set as the music source.
You can set the timer so this unit turns on at a 
certain time every day.
Preparation
Set the clock (lleft).
∫Setting the timer
1Press [SETUP] repeatedly to select 
“TIMER ADJ”.
2Press [3,4] to set the starting time 
(“ON TIME”) and then press [OK].
3Press [3,4] to set the finishing time 
(“OFF TIME”) and then press [OK].
∫Turn the timer on
1Select the music source*1 and set the desired 
volume.
2Press [SETUP] repeatedly to select 
“TIMER SET”.
3Press [3,4] to select “SET” and then press 
[OK].
≥“F” is displayed.
≥To turn the timer off, select “OFF”.
4Press [Í] to turn the unit off.
	
≥To display the timer settings, press [SETUP] repeatedly 
to select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if 
the timer is turned on.
≥During standby, if the timer is turned on, press 
[DISPLAY] twice to display the settings.
≥This unit can be used as normal after the timer is set, 
however:
– Turn the unit to standby mode before the timer start 
time.
– Even if the audio source or the volume is changed, the 
timer will still use the audio source and volume that 
was set when the timer was turned on.
The sleep timer can turn the unit off after a set time.
1Press [SETUP] to select “SLEEP”.
2Press [3,4] to set the time (in minutes) and 
then press [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”^----------------------. OFF (Cancel) (----------------------J
≥The remaining time is indicated on the unit’s display 
except when other operations are performed.
≥The play timer and sleep timer can be used together. 
The sleep timer always has priority.
Direct-Vocal 
Surround
(D.SURROUND)
“LEVEL 1”, “LEVEL 2” or 
“OFF”.
≥The factory preset is “OFF”.
Preset EQ
(PRESET EQ)“HEAVY” (heavy), “SOFT” 
(soft), “CLEAR” (clear), 
“VOCAL” (vocal) or “FLAT” 
(flat/off).
≥The factory preset is “HEAVY”.
Bass (BASS) or 
Treble (TREBLE)Adjust the level (j4 to i4).
Dynamic Bass
(D.BASS)“ON D.BASS” or
“OFF D.BASS”.
≥The factory preset is 
“ON D.BASS”.
Setting the clock
Play timer
Sleep timer
SC-HC58~RQT9754.book  Page 16  Tuesday, December 18, 2012  4:40 PM 
						

							17
RQT9754
ENGLISH
Others
As a factory preset, this unit will always turn off 
automatically if there is no sound output and no 
operation for approx. 30 minutes.
To cancel this function
1Press [SETUP] repeatedly to select 
“AUTO OFF”.
2Press [3,4] to select “OFF” and then press 
[OK].
	≥To turn automatic standby on, select “ON” in step 2.
≥This setting cannot be selected when “FM” is the source.
The brightness of this unit’s display can be 
changed.
1Press [SETUP] repeatedly to select “DIMMER”.
2Press [3,4] to select “ON” and then press 
[OK].
	To cancel the dimmer, select “OFF” in step 2.
When other Panasonic equipment responds to the 
supplied remote control, change the remote control 
code.
1Press [CD] to select “CD”.
2While pressing and holding [SELECTOR] on 
the unit, press and hold [CD/RADIO] on the 
remote control until the units display shows 
“REMOTE 2”.
3Press and hold [OK] and [CD/RADIO] on the 
remote control for at least 4 seconds.
	≥To change the mode back to “REMOTE 1”, repeat the 
steps above but replace the button pressed on the 
remote control from [CD/RADIO] to [ ].
Occasionally, Panasonic may release updated 
software for this unit that may add or improve the 
way a feature operates. These updates are 
available free of charge.
Preparation
≥Turn the unit on.
≥Connect this unit to the wireless network. (l8)
jMake sure that the wireless network is 
connected to the Internet.
jIf “D.CONNECT” is set to “ON”, change the 
setting to “OFF” and connect this unit to a 
wireless network that is connected to the 
Internet.
1Press [SETUP] repeatedly to select 
“SW UPDATE” and then press [OK].
2Press [3,4] to select “UPDATE? Y” and then 
press [OK] to start the update.
3When the update has finished successfully, 
“SUCCESS” is displayed.
4Disconnect the AC power supply cord and 
reconnect it after 3 minutes.
≥Downloading will require several minutes. It may 
take longer or may not work properly depending on 
the connection environment.
	≥If you do not want to update the unit, select 
“UPDATE? N” and then press [OK] in step 2.
≥If there are no updates, “NO NEED” is displayed after 
step 2.
∫Checking the software version
1 Press [SETUP] repeatedly to select “SW VER.” 
and then press [OK].
{.The version of the installed software is displayed.
2 Press [OK] to exit.
Automatic standby
Display brightness
Changing the unit and remote 
control code
Software update
DO NOT DISCONNECT the AC power supply 
cord while one of the following messages is 
displayed.
– “LINKING”, “UPDATING” or “%” 
(“  ” stands for a number.)
≥During the update process, no other operations can be 
performed.
SC-HC58~RQT9754.book  Page 17  Tuesday, December 18, 2012  4:40 PM 
						

							18
RQT9754
To check the Wi-Fi signal strength where the unit is 
located.
Preparation
Connect this unit to the wireless network. (l8)
1Press [SETUP] repeatedly to select 
“SIG.LEVEL” and then press [OK].
≥The unit’s display shows “LEVEL ”. 
(“  ” stands for a number.)
2Press [OK] to exit this display mode.
	
≥It is recommended to have a signal strength of “3”. 
Change the position or angle of your wireless network 
router or the unit if the indication is “2” or “1” and see if 
the connection improves.
≥If “LEVEL 0” is displayed, this unit cannot establish a link 
with the wireless network router. (l21)
≥This function does not work when “D.CONNECT” is set 
to “ON”.
This unit can turn on automatically from standby 
mode when this unit is selected as the AirPlay 
speakers.
Preparation
Connect this unit to the wireless network. (l8)
1Press [SETUP] repeatedly to select 
“NET STNBY” and then press [OK].
2Press [3,4] to select “ON” and then press 
[OK].
	
≥To cancel this function, select “OFF” in step 2.
≥The factory preset is “OFF”. If this function is set to “ON” 
the standby power consumption will increase.
Display the name for the connected wireless 
network (SSID).
1Press and hold [– NETWORK SETUP] on the 
unit and [OK] on the remote control until the 
units display shows the SSID.
2Press [OK] to exit.
	
≥If “NOCONNECT” is displayed this unit is not connected 
to a wireless network.
≥All letters are displayed as capital letters, and characters 
that cannot be displayed are replaced with “¢”.
To check the unit’s IP address or the Wi-Fi MAC 
address.
1Press and hold [– NETWORK SETUP] on the 
unit and [4] on the remote control until the 
unit’s display shows the IP address.
{.The IP address is partially displayed.
≥To display the MAC address on the unit, repeat the 
steps above by replacing [4] with [3].
2Press [3,4] on the remote control to show the 
rest of the IP address.
	
≥To exit the setting, wait 20 sec.
≥The “ – ” displayed on the top or bottom left of the display 
indicate the first and last units respectively.
Wi-Fi signal strength
Network standby
Wireless network name (SSID)
IP/MAC Address
SC-HC58~RQT9754.book  Page 18  Tuesday, December 18, 2012  4:40 PM 
						

							19
RQT9754
ENGLISH
Troubleshooting
Before requesting service, make the following 
checks. If you are in doubt about some of the check 
points, or if the solutions indicated in the following 
guide do not solve the problem, refer to “Customer 
Services Directory (United States and Puerto Rico)” 
on page 30 if you reside in the U.S.A. or Puerto 
Rico, or refer to “Limited Warranty (ONLY FOR 
CANADA)” on page 31 if you reside in Canada.
Do you have the latest software installed?
≥Occasionally, Panasonic may release updated software 
for this unit that may add or improve the way a feature 
operates. (l17)
Humming heard during play.
≥An AC power supply cord or fluorescent light is near the 
cords. Keep other appliances and cords away from this 
unit’s cables.
Incorrect display or play will not start.
≥Make sure that the disc is compatible with this unit. 
(l23)
≥There is moisture on the lens. Wait for about an hour 
and then try again.
A beat sound or noise is heard while receiving 
radio broadcast.
≥Confirm the FM antenna is properly connected. (l6)
≥Adjust the position of the antenna.
≥Try to keep a certain amount of distance between the 
antenna and AC power supply cord.
≥Try using an outdoor antenna if there are buildings or 
mountains nearby.
≥Switch the television or other audio players off or 
separate it from this unit.
≥Keep this unit away from mobile phones if the 
interference is apparent.
Stations cannot be selected.
Change the FM frequency step.
1Press [RADIO] to select “FM”.
2Press and hold [SELECTOR] on the unit.
After a few seconds the display changes to show the 
current lowest frequency. Continue to hold the button 
down. The lowest frequency changes and the step is 
changed.
Cannot charge or operate.
≥Have you selected the appropriate selector? 
Press [iPod] to select either “IPOD_DOCK” or 
“IPOD_PORT”.
≥Check that the iPod/iPhone/iPad is connected properly. 
(l7)
≥The battery of the iPod/iPhone/iPad is depleted. Charge 
the iPod/iPhone/iPad, and then operate again.
≥Connect the iPod/iPhone/iPad again or try to restart the 
iPod/iPhone/iPad.
≥When this unit is in standby mode, charging will not start 
when using the “IPOD_PORT” connection. Turn this unit 
on and make sure the charging has started before 
switching this unit to standby mode.
Cannot connect to the network.
≥Confirm the network connection and settings. (l8)
≥Your wireless network might be set to be invisible. In this 
case select “Manual settings” in “Method 3”. (l10)
≥This unit cannot join a wireless network using WEP 
security settings with the WPS methods (“Method 2”). 
Use “Method 3” to join the wireless network. (l9)
≥Make sure that the multicast function on the wireless 
network router is set to on (enabled).
≥When “D.CONNECT” is used, if the password for 
D.CONNECT has been changed connect the other 
device to this unit using the new password. (l12)
To return all settings to the factory preset
When the following situations occur, reset the 
memory:
≥There is no response when buttons are pressed.
≥You want to clear and reset the memory contents.
1Disconnect the AC power supply cord. (Wait 
for at least 3 minutes before proceeding to 
step 2.)
2While pressing and holding down [Í/I] on the 
unit, reconnect the AC power supply cord.
≥“--------” appears on the display.
3Release [Í/I].
	All the settings are returned to the factory preset. You will 
need to reset the memory items.
Common problems
Disc operations
Radio
iPod/iPhone/iPad operations
AirPlay operations
SC-HC58~RQT9754.book  Page 19  Tuesday, December 18, 2012  4:40 PM 
						

							20
RQT9754
Cannot connect to the unit
≥Display the wireless network name that this unit is 
connected to and make sure that the device is 
connected to the same network. (l8)
≥If “NET STNBY” is set to “OFF”, the AirPlay compatible 
device cannot be connected when this unit is off.
≥Turn off the Wi-Fi setting on the AirPlay compatible 
device, set “NET STNBY” to “OFF” (l18) and then turn 
this unit off and on. Reconnect the compatible device to 
the Wi-Fi network and then select this unit as the AirPlay 
speakers again.
My wireless network router is WPS PBC 
compatible, but the pairing does not work.
≥If the network is set to be invisible, the push button 
configuration does not work. In this case, either make 
the wireless network visible while you set up the network 
for this unit or use “Method 1” or “Method 3”. (l8, 9)
Playback does not start
The sound is interrupted
≥Simultaneous use with other 2.4 GHz devices, such as 
microwaves, cordless telephones, etc., may result in 
connection interruptions.
Increase the distance between this unit and these 
devices.
≥Do not place this unit inside a metal cabinet, for it might 
block the Wi-Fi signal.
≥Place this unit closer to the wireless network router.
≥If “D.CONNECT” is set to “ON”, place the AirPlay 
compatible device closer to this unit.
≥If several wireless devices are simultaneously using the 
same wireless network as this unit, try turning off the 
other devices or reducing their wireless network usage.
≥If the playback stops, check the playback status on the 
iOS device or iTunes.
≥If play does not start (even though the Wi-Fi status 
indicator lights in blue and the AirPlay   icon is 
displayed), restart the wireless network router, turn the 
Wi-Fi connection on the iOS device or Mac/PC off and 
on, and then make sure that your home wireless network 
is selected.
≥If the AirPlay   icon is not displayed even if Wi-Fi 
status indicator lights in blue, try restarting the wireless 
network router.
≥With some iOS and iTunes versions, it may not be 
possible to restart the AirPlay playback if the selector is 
changed (e.g., “CD”) or the unit is turned off, during the 
AirPlay playback.
In this case, select a different device from the AirPlay 
icon of the Music App or iTunes and then re-select this 
unit as the output speakers. (l11 )
Pairing cannot be done.
≥Check the Bluetooth® device condition.
The device cannot be connected.
≥The pairing of the device was unsuccessful or the 
registration has been replaced. Try pairing the device 
again. (l13)
≥This unit might be connected to a different device. 
Disconnect the other device and try pairing the device 
again. (l13)
The device is connected but audio cannot be 
heard through this unit.
≥For some built-in Bluetooth® devices, you have to set the 
audio output to “SC-HC58” manually. Read the operating 
instructions for the device for details.
The sound is interrupted.
≥The device is out of the 10 m (33 ft) communication 
range. Bring the Bluetooth® device closer to this unit.
≥Remove any obstacle between this unit and the device.
≥Other devices that use the 2.4 GHz frequency band 
(wireless router, microwaves, cordless phones, etc.) are 
interfering. Bring the Bluetooth
® device closer to this unit 
and distance it from the other devices.
≥Select “MODE1” for stable communication. (l13)
The remote control doesnt work properly.
≥The remote control and this unit are using a different 
code. (l21, “REMOTE”)
≥Is the battery depleted or is the battery inserted 
incorrectly? (l5)
The following messages or service numbers 
may appear on the units display.
“--:--”
≥You plugged the AC power supply cord in for the first 
time or there was a power failure recently. Set the time 
(l16).
“ADJUST CLOCK”
≥Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
≥Play timer is not set. Adjust the play timer accordingly.
“AUTO OFF”
≥The unit has been left unused for about 30 minutes and 
will shut down within a minute. Press any button to 
cancel it.
Bluetooth®
Remote control
Messages
SC-HC58~RQT9754.book  Page 20  Tuesday, December 18, 2012  4:40 PM