Panasonic Compact Disc Recorder Sl Pr300 Operating Instructions

English
11
RQT6087
Using the Remote Control
When following the procedures in this manual, the
buttons on the remote control have the same func-
tion as the corresponding buttons on the main
unit.
CD1, CD2, CD3 Disc Selection Buttons
Use these to select the disc(s) to be played by the 3-CD changer.
(see page 13, 17)
CD REC Button
Press to start the CD REC function. (see page 27, 28)
CD EDIT Button
Press repeatedly to select Listening Edit or Program Edit functions.
(see page 29, 30)
Number Buttons
Press...

12
RQT6087
Using the Remote Control
1Press down on the point shown by the arrow at 
the top of the compartment cover, and lift the 
cover to open the compartment.
2Place the two accompanying batteries in the 
remote control making sure to match the 
battery polarities with the markings (“+”/“–”) 
inside the compartment.
3Place the cover over the compartment and 
press down lightly until it locks in place.
Align the poles (+ and –) properly when inserting the batteries.
Do not mix old and new batteries...

English
13
RQT6087
Power STANDBY/ON Operations
To turn power to the unit on
Press the POWER   ( ) button on the front panel or remote
control.
The currently selected CD function is shown in the information
display.
To put the unit in standby mode during operation
Press the POWER   ( ) button on the front panel or remote
control.The clock display is shown in the information display. It flashes 
if the clock has not been set.
If the POWER   ( ) button is pressed during a recording oper-
ation, the...

14
RQT6087
Listening to CDs
Example: Loading a CD for playback in tray DISC1.
1Press the DISC1 OPEN/CLOSE 
0 button to 
open the tray.
The power comes on, and tray DISC1 opens.
2Load a CD and close the tray by pressing the 
DISC1 OPEN/CLOSE 
0 button again.
“CD READ DISC” flashes in the information display while the
disc is being read.
Follow steps 1 and 2, repeating the process for DISC2 and
DISC3, pressing the appropriate OPEN/CLOSE 0 buttons, and
load CDs in trays DISC2 and DISC3 as well.
The unit...

English
15
RQT6087
Listening to CDs
Stopping CD playback
To stop playback at any time 
Stop playback of a disc in the 3-CD changer by pressing the CD
Control STOP s button. The total number of tracks and playing
time is shown in the information display.
When all the tracks on a CD have been played through, play-
back stops automatically.
To stop playback temporarily 
If the CD Control PAUSE S button is pressed, playback is
paused temporarily. When the CD Control PLAY p button is
pressed, playback...

16
RQT6087
Listening to CDs
To stop CDR playback temporarily
Pressing the CDR Control PAUSE S button at any time when a
CD is playing in the CDR pauses playback. Press the CDR Con-
trol PLAY p  button to resume playback.
When playback is paused, the S indicator is shown in the dis-
play window.
Removing a CD from the CDR
To remove a CD from the CDR, press the CDR OPEN/CLOSE
0 button. To remove a CD when it is being played back, it is
recommended that playback first be ended by pressing the CDR
Control...

English
17
RQT6087
Listening to CDs
1Press the CD and CDR Deck Selection button 
corresponding to the tray holding the CD and 
track to be played.
2Press the number button(s) of the track you 
want to play.
The track number corresponding to the buttons pressed is shown in
the information display, and playback of that track starts.
To select a two-digit track number
Press the ≥10 button and then the two numbers you want within 5
seconds or so.
Example: Track 15
Press ≥10, then 1, and then 5.
Example:...

18
RQT6087
Listening to CDs
To skip forward or backward to different tracks on the currently
selected CD, use the MULTI JOG control on the main unit or the
R (reverse) or F  (forward) buttons on the remote control.
When the last track on a CD loaded in the 3-CD changer is
advanced to the next track, playback moves to the first track on
the next CD. It is not possible to skip forward when playing the
last track of a CD loaded in the CDR. 
Turn the MULTI JOG control counterclockwise one notch to
return...

English
19
RQT6087
Listening to CDs
When in the 3-CD changer stop mode (CD PLAYER indicator is
shown in the display window), press the PLAY MODE button
(main unit/remote control) repeatedly until “CD RANDOM” is
shown in the information display. The RANDOM indicator will be
shown in the PLAY MODE section of the display window.
Note
The random playback mode cannot be used for discs loaded in
the CDR. 
Random play is started by pressing the CD Control PLAY p
button on the main unit or the p (play) button...

20
RQT6087
Listening to CDs
It is possible to select your own program (order of tracks being
played) using the program playback mode. Any of the tracks (1-99)
on the CDs in the trays of the 3-CD changer can be selected. 
If you want to program and record tracks, see “Program Edit
Recording” on page 30.
1Load CDs into the trays of the  3-CD changer.
Only tracks on the CDs loaded in the 3-CD changer can be reg-
istered into the program.
Note
To close a tray, press the 0 button for the tray number that...