Panasonic Commercial Microwave Ovens Ne 1064 Operating Instructions

How to Operate
C. Programmed Heating:Example: 1 stage; MemoryFad 9 to heat for 3 minutes at HIGH power
1. [EjT]-l
,@
3. Beep tone will sound.(See page 16)
2_stage; Memory Pad 3 (to heat for 3 minutes at HIGH and 2 minutes at DEFROST)12 to program Memory pad.
14 to activate program Lock. Display window
.Press the Memory Pad 9.In Program Lock Mode oven willstart without pressing START
Pad. See page 14.
.Press the START Pad.
Heating willstart.
The time on digital disptay will
count down.i
Allheating...

Prograrnming
- DO NOT OPEN THE DOOR _
The display window MYIT be blank before programming can begin. tf any indicator light isilluminated in the digital Display Window: closeihe door]press sioplneber pad aniwait 1 minute until the Display goes blank.
Display Window
[_--l
A. lltg1ST1llg Memory lads for Singte Stage Heatins:Exampte: To program 30 seconds at Medium power for Nfemory pad Number 5
2 lElrl)*]
.Press the PROG Pad.NOTE:
.lf no PROG lndicator appearedon display, Program Lock shouldbe cancelled....

How to Operate
..,::...
NOTE: Program the remaining Memory Pads as desired by repeating steps 1-5. You may insert up to 10memory Programs.When the PROG indicator is blinking, the program can be cancelled and/or the pad erased bypressing the STOP/RESET Pad.
Display Window
_j!6 r,II .f n II JU IL___-=_j
,J, ,t-ltl
[?IF
Pmt2
lrl
tf I
__j!99_J__---
I rr I
,J 2
[F-ru]
urioer Ia---: - - l
It It__J
rg+------\I rnn II ttut IL__::J
d+i5I Lr tut II tLtLt IL---__-------___
tlII
B. Programming Memory Pads lor 2 or 3...

How to Opeiab
C Programming the Double Quantity Pad - For multiple portion heating:
Your oven is factory set to automatically double the programmed time for multiple portion heating - this isthe correct setting for heatin_g multiple portions of most small foods items. No furthbr programming of thetime is necessary for these food items.The time required to heat multiple portions of some large platters and most bulk food loads is slighily lessthan double that of a single portion. 
This model incorporates a...

How to Operate
Other Features
A. To Activate Program Lock:
This procedure Lockslhe controlpanelMemory Pads into their programmed heating timeslevels. Do Nor OPEN THE DooR. The Display window must be btink before theProgram Lock feature can be activated.
@.Press and hold in the PROG pad
until the display shows P and L.
(for 6 seconds)
.Program Lock feature is now
activated.
NoTE: Do 1ot press PROG Pad for longer than 30 seconds continuously, or false failure code may result..ln Program Lock
a. To activate...

How to Operate
C. To Read Program List:
Allows you to review all currently programmed Pad Number, heating time and power level for each stage.
1. Open the door.
f sTot)
UESETJ
+
1y*,J
2.
Display Window
f---- n I
I ul.While pressing the STOP/RESET Pad,press and hold in the START Pad.
The Bgep Tone setting will show in thedisplay window.
Example: Stage Indicator 1: Beep tone is ONStage.Indicator 2: Beep tone is OFF.2 seconds later, the Program Lock
setting will show in the display
window.
Program Lock : P...

How to Operate
D. To Select Beep Tone Options:
The Beep Tone can be set, ON or OFF.
1. Open the door.
@
3 mll_l
Display Window
i---- nl
I ul
f- nl
I ul
trFTFl
oM2r.....-...---)
lbrrP I
tr t,l-
f--;
I Li
E. To Read the Cycle Counter:
1. Open the door.
.@
@
+
fPo!ml
ILEVEL
The. oven can display the total number of times the oven has been operated cumulatively. Great foranalyzing usage of the oven and traffic flow at the location.
.Press the PROG Pad. The displav willnot change.
.Press the Memory pad....

$elf Diagnostics Failure Code Explanation
This oven monitors its operation and displays a Failure Code in the display window when a problem occurs.
What to do when a failure code appears:
NOTE: Above codes shown in display do not indicate all the possible failures on the unit
Care of Your Microwave Oven
1. Unplug the oven belore cleaning.
2. Keep the inside of the oven clean. When food
spatters or spilled liquids adhere to oven walls, wipe
with a damp paper towel. Mild detergent may be
used if the oven...

Notes
-18- 

Technical $pecifications
1T
Zltt 15
Front View
NE-1064
Power Source120V, 60 Hz, single phase
Required Power13.4 A 1500 w
Output1000 w
Frequency2,450 MHz
Outer Dimensions
(HxWxD)
12 x20% x 14%
(306mmx51Ommx360mm)
Cavity Dimensions
(HxWxD)
8%o x13 x 13
(205mmx33Ommx330mm)
Net WeightApprox. 37 lbs. (16.8 kg)
Shipping WeightApprox. 42 lbs. (19.0 kg)
Timer99 min 99 sec (Digital) x 10 Memory Pads with Doubte Quantity(x2) Pad
lEC 705-88 Test Procedure
Specifications subject to change without notice
ZOtta29s...