Panasonic Combination Vcr Pv C2063 Operating Instructions

2121
TV Operation
  Picture Adjustment
1
Press ACTION to display MAIN MENU.
1) Press    
  
 to 
select “TV”.
2) Press ACTION to 
display SET UP TV 
screen.
3
1) Press     to select 
VIDEO ADJUST.
2) Press 
   to display 
screen.
4
1) Press     to select an 
adjustment item. (See 
below left.)
2) Press 
    
 to adjust.
To Reset Picture Controls,
press     and  
 to select and set “NORMAL”.
All controls return to their factory settings.
Press ACTION three times to exit.
M A I N  MENU
EX I TCLOCKC H...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
VIDEO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONR E C ON TIMERPROG TIMERAUDIO IN
Press PROG to 
end the program. 
To Enter More Programs, 
press 
    to select 
and    to set a blank 
program number, and 
then repeat step 3.
4
P  DT  START    STOP    CH  SPD
1            day  9 :...

2323
Timer Operation
Repeat steps 1 and 2 on page 22.
1
P  DT  START    STOP    CH  SPD1   day    9 : 00p 12 : 00a  08     SP2     8  10 : 00a 12 : 00p 125    SP3   10    8 : 00p  9 : 00p  10    SP4   SU    9 : 00p 10 : 00p     L    LP
CANCEL : ADD / DLT
SELECT :                  SET : END       : PROG
8  SAT  9:00P  12: 00A 08TODAY
----------------------------------------------
DATE       START       STOP       CH
   SP
SELE
CT :                  SET : END       : PROG
Press PROG twice to exit this...

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
VIDEO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERPROG TIMERAUDIO IN
Search System is ...Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are 
made, program index and information are also included. These index marks can...

2525
Advanced Operation
  Auto Operation Functions
 
Tape Position Display
Press TAPE POSITION to detect current tape 
position.
1
DETECT I NG  TAPE  POS I T I ON
2
■  Auto Shut Off      No broadcast signal in TV (Only when 
Weak Signal Display is set to OFF), 
blank tape is Played for 5 minutes 
➞ Power turns off 
        This feature is canceled if any button is 
pressed during above mode. 
■ Auto Playback
     Insert a tape in Power off mode 
➞ Power turns on  
        Playback begins if tape has no...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
  Repeat Play
Set to see a recording over and over.
 
Zero Search
To quickly return to a speci c tape counter 
location. 
1
2
Press STOP.
4
53
Continue playback, rewind, or fast 
forward.
Press COUNTER 
RESET at the 
desired position to 
reset to “0:00:00.”
  Unit goes into FF or REW mode and stops...

2727
Advanced Operation
1) Press     to select 
WEAK SIGNAL 
DISPLAY .
2) Press 
   to set “ON” or 
“OFF.”
1) Press       
 to 
select “CH.”
2) Press ACTION to 
display SET UP 
CHANNEL screen.
When “ON” is selected, the picture is displayed even when 
a broadcast signal is weak or non-existent.
ANTENNA  :   CABLE
AUTO   SETWEAK  S I GNAL   D I SPLAY : OFF
           SET  UP  CHANNEL 
SELECT :                  SET : END       : ACT I ON   
M A I N  MENU
CLOCKC H
SET          : ACT I ON  SELECT  :...

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
SELECT/SET   :CH UP 
 :CH DOWN 
 :VOL UP 
 :VOL DOWN
ACTION
Remote Warning  ON/OFF 
1
Press ACTION twice to return to the normal 
screen. 
When Universal Remote Control (page 32) is used, 
and this feature is set to “ON,” a  warning appears 
whenever an invalid key is pressed in DSS or Cable 
mode.
2...

2929
Advanced Operation
Press ACTION to display MAIN MENU.
 
Enter Secret Code
V-Chip Control Feature is...
This unit has a built-in V-Chip Control 
which allows you to block unwanted TV 
usage based on US MOVIES and US TV 
PROGRAMS Ratings.
A 4-digit code must be entered to view a blocked program 
or change rating settings.
1
  DO NOT forget your secret code.
  Once ratings are set, restricted tapes or programs cannot be 
accessed unless the secret code is entered.
Changing your secret code
 You will...

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Enter Code
1
1) Press  * 
to select US 
MOVIES.
2) Press 
   to set  
“ON” or “OFF.”
If LOCK menu is not displayed, do “Enter Secret 
Code” steps on page 29.
Setup US MOVIES Ratings
Note
  “NEXT PAGE” displays CANADIAN V-Chip setting 
menu. Not necessary except when viewing Canadian 
tapes or...