Panasonic Combination Vcr Pv C1323a Operating Instructions
Have a look at the manual Panasonic Combination Vcr Pv C1323a Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 TA P EPüfSITIüfN CüfUNTERRESET SPEED FM/TV CM/ZERüf PAUSE/SLüf W ACTIüfN PRüfG TRACKING R-TUNE DISPLAY MUTE REC PüfWER 1 23 4 5 6 7 8 9 1000 VüfL VüfL C H C H PLAY STüfP FF/REW/EJECT NITE SLEEP SELECT SEARCH ADD/DLT 2 1 To cancel, press FM/TV o;f the remote or TIMER/FM twice o;f the u;fit. Using FM Radio TIMER/FM Noübes • FM ra;bio ca;f;fot be recor;be;b o;f a Vi;beo cassette. • You may get better receptio;f by repositio;fi;fg the u;fit. • You ca;f;fot select FM Ra;bio mo;be ;buri;fg playback or recor;b, or while a blue back scree;f (PROG, ACTION, MENU) is ;bisplaye;b. • O;fce statio;fs are set, the selecte;b statio;f a;f;b curre;ft time are ;bisplaye;b whe;f FM Ra;bio mo;be is e;ftere;b. To remove time, press DISPLAY. If DISPLAY is presse;b agai;f, the u;fit status scree;f appears. ADD/DLT FM/TV NUMBER Keys ACTION CH/SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN FM 1 87. 5MHz 1 2 : 0 0PM VIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/ PLAY/REPEATFF/ REC TIMER/FMACTIONVIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/ PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERREC ON TIMERPROG TIMERPROG TIMER TV üfperaübion Press a Number key (1~9) to select a preset FM number (see “FM Radio Setup”). Press FM/TV o;f the remote or press TIMER/FM twice o;f the u;fit to ;bisplay FM ra;bio mo;be.
22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Press PROG (or ACTION ) to end the program. To Enter More Programs, press to select and to set a blank program number, and then repeat step 3. 4 CANCEL : ADD / DLT SELECT 1 - 8 : ENTER : END : PROG / ACT I ON P DT START STOP CH SPD 1 day 9 : 00 p 12 : 00a 08 SP 2 -- -- : -- -- : -- -- --3 -- -- : -- -- : -- -- --4 -- -- : -- -- : -- -- -- Press PROG twice (or ACTION ) to exit this mode. • If you’re using a cable box, make sure that it is tuned to the desired channel and the power is left on for timer recording. PROG TIMER indicator lights on the unit.5 Timer Recording You can set up to 8 programs to be recorded while you are away. 1 2 3 Ready Check List All connections are made. Your unit is plugged in. The clock is set to correct time. The tape is long enough. The record tab is in place. SELE CT START DATE 7 FR I --:-- --:-- --TODAY DATE START ST OPCH SLP SELE CT : SET : END : PROG / ACT I ON - - - - - - - - -- - - - - - - -- - - - - - - Press PROG to display SET PROGRAM screen. 1)Press to selectTIMER PROGRAMMING . 2) Press to display screen. If a program is already in memory, press , and to select an unused program number. Press to select and or to set the recording DATE. 1~31 = One time DAILY = MON~FRI WEEKLY SUN~SAT = Same time once a week Repeat step 3 to set:start time, stop time Channel (or LINE for outside source) Speed (SP, LP, SLP) Today ’s Date Example DAILY7 2 1 31 68 9 SELECT / Selection Order WEEKLY (SAT)WEEKLY(MON) WEEKLY (SUN) SET : SELECT : END : PROG SET PROGRAM ON TIMERT I MER PROGRAMMING PROGRAM TIMER indicator VIDEO IN AUDIO IN POWER VOL CHSTOP/EJECT REW/ PLAY/REPEATFF/ REC TIMER/FMACTIONV ID EO INA U DIO IN P O W ERVO LCHSTO P/E JE C TREW /PLA Y /R EPEATFF/R ECTIM ER /F MA C TIO NR E C ON TIMERRECO N T IM ERPROG TIMERPR O G T IM ER VOL CHSTOP/EJECTREW/ ACTION VOL CHSTOP/EJECT REW/ ACTION You can set a Timer Recording using ACTION key on the unit. (See page 11.) Press STOP/EJECT and REW together without a tape inserted to display MAIN MENU. Press + - to select “VCR ” and STOP/EJECT and REW together to display SET UP VCR screen. Press to select “TIMER PROGRAM ” and + to display the TIMER PROGRAM screen. Repeat main steps 3 ~ 5. Timer Recording Using unit Buttons
23 TA P EPüfSITIüfN CüfUNTERRESET SPEED FM/TV CM/ZERüf PAUSE/SLüf W ACTIüfN PRüfG TRACKING R-TUNE DISPLAY MUTE REC PüfWER 1 23 4 5 6 7 8 9 1000 VüfL VüfL C H C H PLAY STüfP FF/REW/EJECT NITE SLEEP SELECT SEARCH ADD/DLT Repeaüb sübeps 1 and 2 on page 22.1 CANCEL : ADD / DLT SELECT 1 - 8 : ENTER : END : PROG / ACT I ON P DT START STOP CH SPD1 ;bay ;bay 9 9 : 0000p 1212 : 0000a 0808 SP SP2 8 10 : 00a 12 : 00p 125 SP3 10 8 : 00p 9 : 00p 10 SP4 SU 9 : 00p 10 : 00p L LP 8 SAT SAT 9:0000P P 1212: 0000A 0808TODAYCATEGORY : MOV I E---------------------------------------------- DATE START STOP CH ABC SP SESELE CT START START DATATESELECT : SET : END : PROG / ACT I ON Press PRüfG twice (or ACTIüfN ) to exit this mo;be. 2 3 To Replace program... To Clear program... 4 Press to select the ;besire;b program. 1) Press to ;bisplay. 2) Press to select a;f;b press or to set ;few program co;fte;fts. 3) Press PRüfG (or ACTIüfN ). Cancel a Timer Recording: (Recording is in progress) Hol;b ;bow;f STOP for a few seco;f;bs to ca;fcel the Timer Recor;bi;fg. • A;fy future ;baily or weekly recor;bi;fgs will be performe;b as programme;b. Press ADD/DLT . Review, Replace or Clear Program Conübenübs : (Recording is noüb in progress) • 2 mi;futes before Timer recor;bi;fg is performe;b, “PLEASE PREPARE FOR TIMER REC” appears a;f;b/ or the PROG TIMER I;f;bicator flashes. Be sure a cassette with recor;b tab is loa;be;b a;f;b the u;fit is i;f Stop mo;be. • If the start times of two programs overlap, the lower ;fumbere;b program will have priority. • If the start time for a Timer Recor;bi;fg comes up ;buri;fg a ;formal recor;bi;fg or O;fe Touch Recor;bi;fg (page 12), the Timer Recor;bi;fg will ;fot be performe;b. • If there is a power i;fterruptio;f of more tha;f o;fe mi;fute, the recor;bi;fg may ;fot be performe;b or co;fti;fue;b. • If “INCOMPLETE” appears after all items have bee;f set, check all e;ftries a;f;b make ;fecessary correctio;fs. Noübes SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN ADD/DLT PROG STOP P DT START STOP CH SPD1 -- ---- -- : ---- ---- : ---- ---- -- --2 8 10 : 00p 12 : 00a 125 SP3 10 8 : 00p 9 : 00p 10 SP4 SU 9 : 00p 10 : 00p L LP SELECT 1 - 8 : ENTER : END : PROG / ACT I ON
24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Search System is ...Each time a recording is made, an invisible index mark is place d on the tape. When timer recordings are made, program index and information a re also included. These index marks can be used to access or scan recordings. Tape Operation Program End Search 1 SEARCH START : FF EX I T : SEARCH PROGRAM END SEARCH Example of Program End Search operation. Fig.1 Fig.2 Fig.3If search exceeds a few seconds in BLANK area. Program 2 BLANK Program 1INDEXPress SEARCH button FF 2 Press SEARCH button Index Search Go directly to the desired recording. • Make each entry within 10 seconds, or the Index Search mode will be canceled. If Index Search is started very close to an index mark, that index mark may not be counted in the search. Notes NOTE: indicates start points of each recording. To calculate the Index NumberExample 1:To go to rec. 2 from rec. 4, enter 3 and press REW. Example 2:To go to rec. 6 from rec. 2, enter 4 and press FF. 6157234 17534 62 Press SEARCH twice in Playback or Stop mode to display PROGRAM END SEARCH screen . Press FF to start search. Upon locating end point... The unit searches slightly past end point, reverse searches, and plays the last few seconds of the program, then stops. If Program End Search is started very close to an index mark, that mark may be skipped over. To cancel, press PLAY or STOP. Locates end point of recording for continuity. End Point Notes PLAYBACK DIRECTIONProgram 1 Program 2 or BLANKINDEX Press SEARCH button FFEnd Point Program 2 BLANKINDEXBLANKProgram 1 Press SEARCH buttonFFEnd Point 1 2 Press SEARCH* in Playback or Stop mode to display INDEX SEARCH screen, and then press NUMBER Keys to select the recording number. To calculate number, see below. Press FF or REW to start search. Play begins at search end. To search forward or back 1 index, press FF or REW while screen left in displayed (10 sec.). ENTER I NDEX NUMBER : 1 US I NG 1- 9 KEYS FOR WARD SEARCH : FF REVERSE SEARCH : REW NEXT : SEARCH EX I T : STOP I NDEX SEARCH FOR WARD SEARCH : FF REVERSE SEARCH : REW I NDEX SEARCH
Advanced üfperaübion 25 TA P EPüfSITIüfN CüfUNTERRESET SPEED FM/TV CM/ZERüf PAUSE/SLüf W ACTIüfN PRüfG TRACKING R-TUNE DISPLAY MUTE REC PüfWER 1 23 4 5 6 7 8 9 1000 VüfL VüfL C H C H PLAY STüfP FF/REW/EJECT NITE SLEEP SELECT SEARCH ADD/DLT Auübo üfperaübion Funcübions Tape Posiübion Display Press TAPE PüfSITIüfN to ;betect curre;ft tape positio;f. 1 DETECT I NG TAPE POS I T I ON 2 Auübo Shuüb üfff No broa;bcast sig;fal i;f TV (O;fly whe;f Weak Sig;fal Display is set to OFF), bla;fk tape is Playe;b for 5 mi;futes => Power tur;fs off • This feature is ca;fcele;b if a;fy butto;f is presse;b ;buri;fg above mo;be. Auübo Playback I;fsert a tape i;f Power off mo;be => Power tur;fs o;f • Playback begi;fs if tape has ;fo recor;b tab. Auübo Rewind Tape reaches its e;f;b => Rewi;f;b => Stop Playback Auübo Ejecüb (Repeaüb Play is “üfFF”)Tape with ;fo recor;b tab reaches its e;f;b Rewi;f;b => Stop => Eject • “DETECTING TAPE POSITION” is ;bisplaye;b o;fly whe;f a cassette is first i;fserte;b a;f;b it takes several seco;f;bs for correct tape positio;f to appear. • The prese;ft tape positio;f i;f;bicatio;f a;f;b amou;ft of tape remai;fi;fg (accor;bi;fg to tape spee;b) is ;bisplaye;b. • Tape remai;fi;fg time ;bisplay may ;fot be precise. Press TAPE PüfSITIüfN (or wait 5 seco;f;bs) to retur;f to the ;formal scree;f. • This fu;fctio;f ca;f;fot ;bisplay exact amou;ft of tape remai;fi;fg for tapes 30 mi;futes or less, or for tapes over 120 mi;futes i;f le;fgth. Noübe To fi;f;b out prese;ft tape positio;f a;f;b amou;ft of tape remai;fi;fg. Tape posiübion is displayed for VHS-C Casseübübes übype, übapes under 30 minuübes, and some oübher übapes, buüb übhe posiübion is noüb correcüb. SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN SEARCH FF REW TAPE POSITION NUMBER Keys BEG I N END SLP R 120 MIN. FFREW VIDEO IN AUDIO IN POWER VOL CHSTOP/EJECT REW/ PLAY/REPEATFF/ REC TIMER/FMACTIONVIDEO IN AUDIO IN POWER VOL CHSTOP/EJECT REW/ PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERR E C ON TIMERPROG TIMERPROG TIMER
26For assisübance, please call : 1-800-211-PANA(7262) or send e-mail übo : consumerproducübs@panaüpsonic.com
Tape üfperaübion (conübinued)
Repeaüb Play
Set to see a recor;bi;fg over a;f;b over.
1
2
1) Press to
select
“REPEAT
PLAY.”
2) Press
to
set REPEAT
PLAY “ON” or “OFF.”
3
M A I N MENU
T V VCR
EX I T
CLOCKC H
LANGUAGE
SET : ACT I ON SELECT : ;u
1)Press
to select “VCR.”
2) Press
ACTIüfN to
;bisplay SET
UP VCR
scree;f.
Press ACTIüfN
to ;bisplay
MAIN MENU.
4
Press ACTIüfN twice
to e;f;b setup.
Zero Search
To quickly retur;f to a specific tape cou;fter locatio;f.
1
2
Press STüfP.4
5 3
Conübinue playback, rewind, or
fasüb forward. Press CüfUNTER
RESET
at the
;besire;b positio;f to
reset to “0:00:00.”
• U;fit goes i;fto FF or REW mo;be a;f;b stops at
the last poi;ft the Cou;fter was set to 0:00:00.
Press DISPLAY ;buri;fg playback to
;bisplay the Cou;fter.
• Playback repeats whe;f tape e;f;b is reache;b or
u;frecor;be;b portio;f over 30 seco;f;bs is ;betecte;b.
• Duri;fg playback, you may also press PLAY/ REPEAT repeate;bly o;f the u;fit to select
REPEAT “ON” or “OFF.”
Press CM/ZERüf
i;f stop mo;be to
start ZERO
SEARCH.
• : Prese;ft positio;f mark: Zero positio;f markBEG I N END
1 : 23 : 45
BEG I N END
0 : 00 : 00
• If a bla;fk portio;f exists o;f the tape, a;f;b ;bepe;f;bi;fg o;f the positio;f of the mark, the mark ;bisplay may be out of positio;f.
Noübes
Press CM/ZERüf repeate;bly to
select skip time i;f Play mo;be.
• No i;f;bicatio;f appears.
Commercial Skip
By pressi;fg the CM/ZERO butto;f i;f Playback mo;be
you ca;f skip over 1 to 3 mi;futes of recor;be;b tape i;f
just a few seco;f;bs.
1
Noübe
REPEATREPEAT PLAY ;u PLAY ;u : OFFFFT I MER PROGRAMMING
SELECT : SET :
END : ACT I ON
SET UP VCR
Advanced üfperaübion
27
TA P EPüfSITIüfN
CüfUNTERRESET
SPEED
FM/TV CM/ZERüf
PAUSE/SLüf
W
ACTIüfN PRüfG
TRACKING
R-TUNE
DISPLAY
MUTE
REC
PüfWER
1
23
4 5
6
7 8
9
1000
VüfL
VüfL C H
C H
PLAY
STüfP FF/REW/EJECT NITE
SLEEP
SELECT
SEARCH
ADD/DLT
Special VCR Feaübures
Whe;f “ON” is selecte;b, the picture is ;bisplaye;b eve;f
whe;f a broa;bcast sig;fal is weak or ;fo;f-existe;ft.
ANTENNA : CABLE
AUTO SETCHANNEL CAPT I ONWEAK SEAK S I GNAL GNAL D I SPLAYSPLAY : OFFOFF
SELECT : SET :
END : ACT I ON
SET UP CHANNEL
M A I N MENU
CLOCKC H
SET : ACT I ON SELECT : ;u
VCRT V
EX I TLANGUAGE
Weak Signal Display üfN/üfFF
1
23
• “ON” = Picture is ;bisplaye;b regar;bless of sig;fal co;f;bitio;f, a;f;b may ;fot always be clearly
visible.
“OFF” = Scree;f tur;fs soli;b blue whe;f sig;fal is abse;ft or weak.
• If u;fit is co;f;fecte;b to equipme;ft which has blue back feature, selecti;fg “ON” will have ;fo effect o;f
the other equipme;ft.
VCR Lock
All operatio;fs are prohibite;b except Timer recor;bi;fg
a;f;b tape eject. "Auto power o;f" is ;fot prohibite;b
whe;f VCR lock is activa;ute;b. Useful for fam ilies with
small chil;bre;f.
VCR LOCK ACT I VATED
VCR LOCK OFF
4
Press ACTIüfN to ;bisplay MAIN
MENU.
1)Press
to select “CH.”
2) Press ACTIüfN
to ;bisplay SET
UP CHANNEL
scree;f.
Press ACTIüfN twice
to retur;f to the ;formal scree;f. 1)
Press
to
select WEAK
SIGNAL
DISPLAY .
2) Press
to set
“ON” or “OFF.”
Noübes
• VCR Lock is ca;fcele;b automatically
after about 24 hours if clock is set.
•
“Auto Power O;f” is ;fot prohibite;b whe;f
VCR Lock is activate;b.
I;f stop mo;be, hold
down REC o;f the u;fit
without a cassette
i;fserte;b for 7 seco;f;bs
to tur;f “ON.” Please
ig;fore NO CASSETTE
war;fi;fg.
Repeat above with or
without cassette to
tur;f “OFF.”
SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN
CM/ZERO
ACTION
DISPLAY
COUNTER
RESET
REC
VIDEO IN AUDIO IN
POWER VOL CHSTOP/EJECT REW/ PLAY/REPEATFF/ REC TIMER/FMACTIONVIDEO IN AUDIO IN
POWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERR E C ON TIMERPROG TIMERPROG TIMER
28For assisübance, please call : 1-800-211-PANA(7262) or send e-mail übo : consumerproducübs@panaüpsonic.com
TA P EPüfSITIüfN
CüfUNTERRESET
SPEED
FM/TV CM/ZERüf
PAUSE/SLüf
W
ACTIüfN PRüfG
TRACKING
R-TUNE
DISPLAY
MUTE
REC
PüfWER
1
23
4 5
6
7 8
9
1000
VüfL
VüfL C H
C H
PLAY
STüfP FF/REW/EJECT NITE
SLEEP
SELECT
SEARCH
ADD/DLT
Special VCR Feaübures (conübinued)
1
2
Press ACTIüfN to ;bisplay MAIN MENU.
Channel Capübion
1)Press
to select “CH.”
2) Press ACTIüfN
to ;bisplay SET
UP CHANNEL
scree;f.
3
1)Press to
select CHANNEL
CAPTION.
2) Press
to
;bisplay scree;f.
4
5Press ACTIüfN four times to e;f;b setup.
1)Press to
select a statio;f.
2) Press
to
move cursor to
the right.
3) Press
to
select cha;f;fel
;fumber.
4) Press
to set
preset captio;fs.
• Repeat step 4 u;ftil the
Captio;f List is complete.
To Make CorrecübionsPress , the;f to select cha;f;fel ;fumber.
Press to cha;fge, or ADD/DLT to ;belete.
Channel Capübion is ...Statio;f ;fames, e.g. ABC, TNN, etc. are set so they
will appear whe;f a cha;f;fel is selecte;b. Choose 24
preset ;fames.
ANTENNA : CABLE
AUTO SETCHANNENNEL CAPCAPT I ONONWEAK S I GNAL D I SPLAY : OFF
SELECT : SET :
END : ACT I ON
SET UP CHANNEL
- -
- -
- -
- -
CHANNEL CAPT I ON
SELECT : SET :
END : ACT I ON
PBSCNNESPN
HBO
- -
- -
- -
- -
- -
- -
- -
- -
ABCABCCBS
FOX
NBC
4 2- -3 5- -
CHANNEL CAPT I ON
CLEAR : ADD / DLT SELECT : SET :
END : ACT I ON
TNT
UPN
WB
DSC
CBC
CTV
TSNGLOB
6 2
2 1
5 2
1 2 3
M A I N MENU
CLOCKC H
SET : ACT I ON SELECT : ;u
VCRT V
EX I T
LANGUAGE
SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN
ACTION
ADD/DLT
Advanced üfperaübion
29
TA P EPüfSITIüfN
CüfUNTERRESET
SPEED
FM/TV CM/ZERüf
PAUSE/SLüf
W
ACTIüfN PRüfG
TRACKING
R-TUNE
DISPLAY
MUTE
REC
PüfWER
1
23
4 5
6
7 8
9
1000
VüfL
VüfL C H
C H
PLAY
STüfP FF/REW/EJECT NITE
SLEEP
SELECT
SEARCH
ADD/DLT
V-Chip Conübrol Feaübure
Press ACTIüfN
to ;bisplay MAIN MENU.
Enüber Secreüb Code
V-Chip Conübrol Feaübure is...This u;fit has a built-i;f V-Chip Co;ftrol which allows
you to block u;fwa;fte;b TV usage base;b o;f US
MOVIES a;f;b US TV PROGRAMS Rati;fgs.
A 4-;bigit co;be must be e;ftere;b to view a blocke;b program or
cha;fge rati;fg setti;fgs.
1
• DO NOT forget your secret co;be.
• O;fce rati;fgs are set, restricte;b tapes
or programs ca;f;fot be accesse;b
u;fless the secret co;be is e;ftere;b.
Changing your secreüb code
• You will ;fee;b your curre;ft
co;be. Do steps 1 ~ 4 . I;f step
5 , press ADD/DLT to clear
curre;ft co;be. Repeat steps 4
a;f;b 5 to e;fter ;few co;be.
1) Press to
select “TV.”
2) Press ACTIüfN to
;bisplay SET UP TV
scree;f.
2
M A I N MENU
T V VCR
EX I T
CLOCKC H
LANGUAGE
SET : ACT I ON SELECT : ;u
1)Press to select
LOCK.
2) Press
to ;bisplay
scree;f.3
1) Press number
keys to e;fter your
secret co;be.
2) Enüber same code
agai;f for co;ffirmati;uo;f.
4
Press to ;bisplay US
Rati;fgs me;fu
(see page 30).
Or
Press ACTIüfN
three times to exit.
5
LOCK
RECOGN I ZEDCHANGE CODE : ADD / DLT
CONT I NUE :
END : ACT I ON
CONF I RM 4-D I G I T CODE
****
****
Noübes
Process of V-Chip Conübrol
Feaübure SeübupBlocking
Enüber Code
ENTER : 0 - 9
END : ACT I ON
LOCK
ENTER 4-D I G I T CODE
- ---
• Step 2) ;fot ;fecessary
whe;f cha;fgi;fg rati;fg
or secret co;be.
• Take care that you are ;fot observe;b e;fteri;fg
the secret co;be.
To Make Correcübions
Press
repeate;bly to
move the cursor. Press
;fumber keys to make
the correctio;f.
LOCKLOCKCAPT I ON I NPUT SELECT : TUNERV I DEO ADJUST
SELECT : SET :
END : ACT I ON
SET UP TV
SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN
ACTION
ADD/DLT
NUMBER Keys
30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Enter Code 1 1)Press to select US MOVIES. 2) Press to set “ON” or “OFF.” If LOCK menu is not displayed, do “Enter Secret Code” steps on page 29. “ON” => V-Chip Control is activated. “OFF” => V-Chip Control is deactivated. Setup US MOVIES Ratings Note “NEXT PAGE” displays CANADIAN V-Chip setting menu. Not necessary except when viewing Canadian tapes or broadcasts. 1 1) Press to select US TV PROGRAMS. 2) Press to set “ON” or “OFF.” Setup US TV PROGRAMS Ratings “ON” => V-Chip Control is activated. “OFF” => V-Chip Control is deactivated. Note “NEXT PAGE” displays CANADIAN V-Chip setting menu. Not necessary except when viewing Canadian tapes or broadcasts. 2 1) Press to select CHANGE SETTINGS. 2) Press to display screen. 3 1) Press to select VIEW NR PROGRAMS?. 2) Press to set “YES” or “NO.” NR (Not Rated) PROGRAMS Some movies, such as old movies or foreign movies usually have no ratings. 4 Press to select and to set ratings to be blocked. (See ratings chart next page.) 5 Press ACTION to redisplay LOCK menu and continue with US TV PROGRAMS Ratings Setup (this page). Or, press ACTION four times to exit. 5 Press ACTION four times to exit this mode. NR (Not Rated) PROGRAMS Some TV shows, such as news, sports, weather, bulletins, emergency information usually have no ratings. 3 1) Press to select VIEW NR PROGRAMS?. 2) Press to set “YES” or “NO.” 2 1) Press to select CHANGE SETTINGS. 2) Press to display screen. You may select from standard TV ratings (chart 1), or customize to a specific content rating (chart 2). 4 Press to select and to set ratings to be blocked. (See ratings charts next page.) Ratings highlighted in Green will be blocked. Ratings in white letters will not be blocked.Note Blocking Process of V-Chip Control Feature Setup US MOVIES : OFF CHANGE SETT I NGS US TV PROGRAMS : OFF CHANGE SETT I NGS SELECT : SET : END : ACT I ON LOCK NEXT PAGE US MOVIES : OFF CHANGE SETT I NGS US TV PROGRAMS : OFF CHANGE SETT I NGS SELECT : SET : END : ACT I ON LOCK NEXT PAGE G PG PG -13R NC-17X V I EW NR PROGRAMS? : YES GENERAL AUD I ENCESELECT : SET : END : ACT I ON UNLOCKED US MOVIES : OFF CHANGE SETT I NGS US TV PROGRAMS : OFF CHANGE SETT I NGS SELECT : SET : END : ACT I ON LOCK NEXT PAGE US MOVIES : OFF CHANGE SETT I NGS US TV PROGRAMS : OFF CHANGE SETT I NGS SELECT : SET : END : ACT I ON LOCK NEXT PAGE V I EW NR PROGRAMS? : YES FOR ALL CH I LDRENSELECT : SET :END : ACT I ON TV-Y TV-Y7 TV-GTV-PGTV-1 4 TV-MA FV V S L D V S L D V S L UNLOCKED TV-Y TV-Y7 TV-GTV-PGTV-1 4 TV-MA FV V S L D V S L D V S L UNLOCKEDV I EW NR PROGRAMS? : YES CONTA I NS NO RAT I NGSELECT : SET :END : ACT I ON G PG PG -13R NC-17X V I EW NR PROGRAMS? : YES CONTA I NS NO RAT I NGSELECT : SET : END : ACT I ON UNLOCKED V-Chip Control Feature (continued)