Panasonic Color Video Projection System Pt 51hx41 Operating Instructions

							®
®
Color Video Projection System
Operating Instructions
PT-51HX41 PT-56HX41 PT-61HX41
TQB2AA0381 10316
PRINTED IN MEXICO
Sistema de proyección 
de vídeo a color
Instrucciones de Operación
TQB2AA0381 10316
IMPRESO EN MEXICO
PT-51HX41 PT-56HX41 PT-61HX41
For assistance, please call: 1-888-VIEW-PTV or send
e-mail to: [email protected]
Para asistencia llame al teléfono: 1-888-VIEW-PTV
o envíe un correo electrónico a la dirección: 
[email protected]
0381 cover.fm  Page 1  Thursday, May 10, 2001  10:21 AM 
						

							WARNING:  To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside.  Refer servicing to qualified service personnel.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance. The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING:  To prevent fire or shock hazard, do not expose this appliance 
to rain or moisture.
  
						

							2
TABLE OF CONTENTS
Table of Contents
Feature Chart ............................................................3
Congratulations ........................................................4
Customer Record .....................................................................4
Care and Cleaning ...................................................................4
Specifications ...........................................................................4
Installation .................................................................5
Television Location...................................................................5
Optional Cable Connections.....................................................5
AC Power Supply Cord ............................................................5
Cable / Antenna........................................................................5
Optional Equipment Connections .............................................6
VCR Connection.......................................................................6
Cable Box Connection..............................................................7
VCR and Cable Box Connection ..............................................8
Amplifier Connection (To Audio Amp)  .....................................9
Program Out Connection (Prog.Out) ........................................9
Dolby Center Channel Input Connection ................................10
Picture In Picture (PIP) Operation .........................11
 Basic PIP Operation ..............................................................11
 PIP Operation with a Cable Box ............................................11
Split Screen Operation ........................................... 12
Digital TV - Set-Top (DTV-STB) or DVD
Connection .............................................................. 13
Roller Guide Menu™Navigation ............................ 14
Remote Control Guide............................................................14
Roller Guide Feature Chart .................................... 15
Special Features .....................................................19
Program Channels .................................................................19
Closed Captioning ..................................................................19
Closed Captioning Mode ........................................................19
Closed Caption on Mute .........................................................19
Convergence 1 .......................................................................20
Convergence 2 .......................................................................21
Sleep Timer ............................................................................22
Timer 1 and 2 .........................................................................22
Audio ......................................................................................23
Picture ....................................................................................23
Selectable 16:9 Mode Feature Chart .....................................24
Channels - Favorites ..............................................................25
Channels - Caption.................................................................25
Video Input Skip .....................................................................25
Lock .......................................................................................26
Troubleshooting Chart ........................................... 27
Read these instructions completely before operating PTV.
Contents are subject to change without notice or obligation.
Copyright 2001 by Matsushita Electric Corporation of America.  All rights reserved.
Unauthorized copying and distribution is a violation of law.  
						

							3
FEATURE CHART
Feature Chart 
  
MODELS
PT-51HX41
PT-56HX41
PT-61HX41
FEATURES
MENU LANGUAGE ENG/SPAN/FRrrr
2 TUNER SPLITr rr
VIDEO INPUT SKIPrrr
CLOSED CAPTIONINGrrr
V-CHIP CAPABILITY rrr
DIGITAL SCAN RATE1080i,
480p1080i,
480p1080i,
480p
NTSC LINE - DOUBLER480p480p480p
VIDEO NORMrrr
AUDIO NORMrrr
STEREOr    rr
AI SOUNDrrr
BASS/BALANCE/TREBLEr    rr
SURROUNDrrr
DOLBY CENTER CHANNEL INrrr
A/V PROGRAM OUTrrr
A/V IN (REAR/FRONT)4 (3/1)4 (3/1)4 (3/1)
AUDIO OUTrrr
S-VHS INPUT (REAR/FRONT)2/12/12/1
COMPONENT INPUT   2  2  2
IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR
OTHER FIXED IMAGE DISPLAYS.
WARNING: The marking or retained image on the picture tube resulting from viewing fixed
image is not an operating defect and as such is not covered by Warranty. 
The projection television is designed to display constantly moving images on the screen.
Continuous viewing of stationary images such as letterbox pictures on standard screen TVs (with
top/bottom bars), non-expanded standard (4:3) pictures on wide screen TVs (with side bars shown
on each side of an image), stock market report bars (ticker running at the bottom of the screen),
video game patterns, fixed scoreboards, bright station logos, on-line (internet) or repetitive computer
style patterns should be limited.
The extended use of fixed image program material can cause a permanent picture tube damage,
shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube
deterioration can be limited by performing the following steps:
• Limit the display of fixed image program material to no more than 15% of total viewing time per week.
• Turn the power off when not in use.
 A/V JACKS
AUDIO
  SPECIAL 
FEATURES 
						

							4
CONGRATULATIONS
Congratulations
Your new Projection Television (PTV) features state-of-the-art technology for high
quality picture and sound with complete audio/video connections for your home
theater system. Your PTV is designed to give you many years of enjoyment. It was
thoroughly tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of the PTV. You
should note the model and serial number in the space provided and retain as a permanent
record of your purchase.  This will aid in identification in the event of theft or loss. Product
registration for U.S. customers is available at:  www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Projection Screen (Turn PTV Off)
The projection screen is a high precision lens system which has a protective screen.
The protective screen is fully washable with the following precautions:
rUse a mild soap solution or window cleaner and a clean cloth.
• DO NOT USE ABRASIVE CLEANERS.
• Do not use laundry detergent or automatic dishwasher soap.
• Do not use alcohol, ammonia, or petroleum based products. 
rAvoid excessive moisture and wipe dry.
• Prevent solution from running into the receiver below.
rAvoid bumping or scraping the screen.
Cabinet and Remote Control
rFor cabinets and remote control, use a soft cloth dampened with water or a mild
detergent solution.  Avoid excessive moisture and wipe dry.
rDo not use benzene, thinner or other petroleum based products. 
Specifications
Specifications are subject to change without notice or obligation.
Power Source
PT-51HX41 (4.2A)
PT-56HX41 (4.2A)
PT-61HX41 (4.2A)
120V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks500mV RMS 47K Ohm
Video Output Jack1Vp-p, 75 Ohm, Phono Jack Type
 Audio Output Jacks0-2.0V RMS 4.7K Ohm
Component Input (Y / PB / PR)75 Ohm, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector 
						

							5
INSTALLATION
Installation
Television Location
This unit can be used as an entertainment center.  Consult your dealer for available options.
rAvoid excessive sunlight or bright lights, including reflections.
rKeep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
rFluorescent lighting may reduce remote control transmitting range.
rKeep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
rUse 75-ohm coaxial shielded cables.
rUse appropriate input and output connectors, that match your component connectors.
rAvoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:  TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR
PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE
THEY EXIT FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in SET UP
menu under Prog Chan (Program Channels).
Note:A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
Antenna Connections
• For proper reception of VHF/UHF channels, an external antenna is required. For
best reception, an outdoor antenna is recommended.
•Connect home antenna to ANT1 connection on back of
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.  
    
Polarized plug
75 Ohm VHF/UHF
on back of PTV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
  Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV Mode and
ANT 1 in the Set Up menu. 
						

							6
INSTALLATION
Optional Equipment Connections
VCR Connection
Follow this diagram when connecting your television to a VCR only. 
Note:The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
rOption A
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
rOption B
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
rOption A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
rOption B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view. 
VCR
CABLES NOT SUPPLIEDCONNECTIONS ON BACK OF TV
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.W
12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
L
R AUDIO OUTVIDEO OUT
ANT IN ANT OUT 
Incoming 
Cable 
						

							7
INSTALLATION
Optional Equipment Connections (Cont.)
Open the door on the PTV front panel to use the connections for your optional
equipment (Palmcorder, VCR, or other video components). Select  input 4 mode by
pressing TV/VIDEO button.   
Cable Box Connection
Follow this diagram when connecting your television to a cable box only.
Note:The remote control must be programmed with supplied codes to operate the cable
box. See Programming the Remote Control in the Remote Control Quick Reference
Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note:To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chan.
      S -VIDEO   VIDEO     L-AUDIO-R           
INPUT 4
CONNECTIONS OF FRONT OF PTV
CONNECTIONS ON BACK OF TV
CABLE BOX
INCOMING 
CABLE
CABLES NOT SUPPLIED
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.W
12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
ANT OUTANT IN 
						

							8
INSTALLATION
Optional Equipment Connections (Cont.)
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
Note:The remote control must be programmed with supplied codes to operate the VCR and
cable box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note:To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chan.  
Recording a premium (scrambled) cable channel 
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input ( VIDEO 1,
VIDEO 2, etc.) connected  to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on your VCR.
5. Using your cable box, tune to the premium cable channel you want to record.
6. Begin recording.
Note:To view a different channel while recording:• Select  ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to select TV mode.
• Tune the television to a television program (except another premium cable channel).   
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.W
12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
CONNECTIONS ON BACK OF TV
CABLES NOT SUPPLIED Incoming 
Cable
CABLE BOX
ANT INANT OUT
VCR
L
R AUDIO OUTVIDEO OUT
ANT OUT ANT IN  
						

							9
INSTALLATION
Optional Equipment Connections (Cont.)
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP
outputs on back of television.
Note:TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select SPEAKERS ON located in the on screen AUDIO menu . 
2. Set amplifier volume to minimum.
3. Adjust PTV volume to desired level.
4. Adjust amplifier volume to match the PTV.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu to control
speakers from the PTV or select FIXED AUDIO OUT to control speakers from the
external amplifier. 
6. Volume, mute, bass, treble and balance are now controlled from the PTV, if you select
VARIABLE AUDIO OUT mode. 
Program Out Connection (PROG. OUT)
To use the PTV audio and video with optional video equipment, use PROG. OUT and TO
AUDIO AMP terminals on the back of the PTV.
 Procedure
1. Connect optional video equipment to PROG. OUT video and TO AUDIO AMP R/L
Audio terminals.
2. PROG  OUT terminal display is the same as the on screen display.
See optional equipment manual for further instructions for recording or monitoring.
CONNECTIONS ON BACK OF TV
CABLES NOT SUPPLIED
VCR
OR MONITOR
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.W
12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS