Panasonic Color Video Camera Aw E560 Operating Instructions
Have a look at the manual Panasonic Color Video Camera Aw E560 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
-9- Pin No. Signal Pin No. Signal1 Composite Video Output 11 RCB Transmission2 GND 12 Control (Command)3 G/Y/Y Output 13 +9.2 V RCB4 R/PR/C Output 14 DC 12 V Output5 GND 15 DC 12 V Input6 RCB Detect 16 DC 12 V Input7 EXT SUB In 17 RCB Reception8 B/PB Output 18 GND9 GND 19 GND 10 G/L Input 20 Not used Remote Connector (REMOTE) DC Input Connector (EXT DC IN) 10. Remote Connector (REMOTE) Input terminal dedicated to control signals from the optional Remote Control Box (WV-CB700A) and the Remote Control Unit (WV-RC700A). * WV-CB700A is connected through the optional con- version cable (WV-CA20T10). * WV-RC700A is connected through the optional con- version cable (WV-CA26T20).11. Power Indicator Red LED lamp lights to indicate that the specified DC power is supplied to the camera. 12. DC Input Connector (EXT DC IN) 12 V DC is supplied through the 4-pin connector pro- vided with the camera. Pin No. Signal1 +12 V In2 +12 V In3 Ground 4 Ground oq iw u e yt r !2 !0 !1 !3 !4 !5 !6 @0!9!8!7 r e w q
-10- 13. Video/RGB Output Connector (VIDEO/RGB) Composite/Y signal, RGB/Y-C/component signal and synchronizing signal are output from this connector. * Refer to Page 41 for signal selection. The optional cable WV-CA9T5 or WV-CA9T9 must be used for connection to this connector. Pin No. Signal Pin No. Signal1 GND 6 SY/COMP2 GND 7 SYNC3 R/PR/C 8 GND4 G/Y/Y 9 C/NC 5 B/PB/NC The multiplex adaptor WV-PS550 is connected to this connector when using a coaxial multiplex system. The WV-RC700A and WV-PS550 can be connected with a coaxial cable. Pin No. Signal Pin No. Signal1 Composite Video Output 15 Defroster Control Output2 GND 16 Wiper Control Output3 Not Used 17 Common4 Not Used 18 +5.2 V Output5 G/L Input 19 GND6 GND 20-5.2 V Output7 WV-PS550 Detect 21 GND8 PS Transmission 22 GND9 PS Reception 23 DC 12 V Input10 GND 24 DC 12 V Input11 UP Control Output 25 Not Used12 Down Control Output 26 +9.2 V Output13 Left Control Output 27 GND 14 Right Control Output 28 GND Control Connector (CONTROL) Video/RGB Output Connector (VIDEO/RGB) 14. Control Connector (CONTROL) Control signals for a pan/tilt unit come to this connec- tor when a pan/tilt unit controller is connected to the camera through the Remote Control Unit WV-RC700A with a multicable. Ú4 Ú3 Ú2 Ú1 Ú0 . , m n b c x z Û8 Û7 Û6 Û5 Û4 Û3 Û2 Û1 Û0 Ú9 Ú8 Ú7 Ú6 Ú5v oq iw u e y tr
-11- 15. G/L Signal 75-ohm ON/OFF Switch (75½ON/OFF) A terminating switch for G/L signals at Items 16 and 17. 16. G/L VBS/HD Input Connector (G/L IN - VBS/HD) Signals synchronized with the reference signal are to be supplied to this connector when the camera is to be synchronized with the reference signal. VBS/BB, VS and HD signals are to be automatically deter- mined. 17. G/L VD Input Connector (G/L IN - VD) Same as Item 16 except that VD signal is to be sup- plied when input signal at Item 16 is HD. LENS MOUNTINGLenses of any make can be mounted on the camera as long as they are equipped with a 1/2” standard bayonet.1. Mounting Rotate the lens fixing ring knob counterclockwise and remove the lens mount cap. Mount the lens on the camera and rotate the lens fixing ring knob clockwise in order to fix the lens securely. Then connect the lens cable to the IRIS Connector on the back panel of the camera. * Use the lens extension cable WV-CA12T12 (6”/15cm) if your lens cable is too short. Lens fixing ring knob
-12- FLANGE BACK ADJUSTMENT1. Fully open the iris by shooting a dark object. (Iris selection switch should be set to M.) 2. Loosen the flange back lock knob. 3. Aim the camera at any object over 2 meters away from the camera. 4. Set the lens to its TELE end first and adjust its focus with the focus ring. 5. Set the lens to its widest angle next and adjust its focus with the flange back adjust ring. 6. Adjust the focus ring and the flange back adjust ring alternately for the best focus within the zooming range. Tighten the flange back lock knob upon completion of focusing. 7. Turn the iris selection switch to Position A. * The figure represents Lens PH15X7BKRS2U. IRIS GAIN CONTROL IN A LENSAn iris gain control hole is usually provided in the front of a lens. Adjustment of the iris gain, with a screwdriver through the hole may be done as follows. (Shape and location of the hole may vary depending on the lens make.) 1 Turn the iris selection switch to Position A (AUTO). 2 Rotate the iris gain control to the maximum gain but in a range where no hunting or oscillating of the iris ring develops. * The figure represents Lens PH15X7BKRS2U. Flange back adjust ringFlange back lock knob Focus ring Iris gain control Automatic iris power zoom lens
ZOOM/FOCUSREMOTE EXT DC IN PAGE ITEM(AWC) UP(ABC)DOWN(BAR) IRIS SEE MANUAL CAUTIONCONNECT TO SPECIFIED CLASS 2 POWER SUPPLY ONLY SEE MANUAL VBS/HD75¶ VD VIDEO/RGB CONTROLVIDEO OUT G/L IN ON OFF -13- n CONNECTION OF DEVICE WITH A COMPOSITE INPUT CONNECTORCONNECTIONSCaution : The connection and installation should be done by qualified service personnel or system installers. Refer any servicing to qualified service personnel. 1. Connect this to a 12V DC class 2 power supply only. 2. To prevent fire or shock hazard, the UL listed wire VW-1, style 1007 should be used as for the cable for 12V DC Input Connector.Cautions• Connection to any device which has a composite input connec- tor, such as a video monitor or a VCR, must be made through the VIDEO OUT Connector. • Power supply to the camera must be through the optional Conversion Cable WV-CA4C4P or a power cable assembled with the connector provided with the camera. • Power source must be able to continuously supply 12 V DC, 2A nominally. VIDEO OUT Connector Power supply: 12 V DC, 2A min.Video monitor Conversion Cable WV-CA4C4P VIDEO IN To AG-B640 or AU-B110 or 75½coaxial cable Power Cable (locally purchased)
-14- How to assemble the power cable:The power cable is to be assembled with the connector provided with the camera. 1. Prepare the wire. 2. Fix with a screw if necessary. Put the casing and the rubber bushing on after solder- ing wires to the connector.Caution : To prevent fire or shock hazard, the UL listed wire VW- 1, style 1007 should be used as for the cable for 12V DC Input Connector. 1 24 3AWG24 or larger 3/16 (5 mm)
-15- Input signals to an RGB monitor or image processor must be supplied from the VIDEO/RGB connector through the optional D Sub/BNC cable WV-CA9T5 or D Sub/D Sub cable WV-CA9T9.NOTES: • Output signals at the VIDEO/RGB connector can be selected from the INITIAL SET menu. • SYNC level can be selected from the INITIAL SET menu. nCONNECTION OF DEVICE WITH AN RGB MONITOR OR AN IMAGE PROCESSORPin Wires OutputNo. Color Signal3 Red R/PR/C4 Green G/Y/Y5 Blue B/PB6 White Y/COMP 7 Black SYNCWV-CA9T5 Cable Information 1. Connect this to a 12V DC class 2 power supply only. 2. To prevent fire or shock hazard, the UL listed wire VW-1, style 1007 should be used as for the cable for 12V DC Input Connector.Cautions ZOOM/FOCUSREMOTE EXT DC IN PAGE ITEM(AWC) UP(ABC)DOWN(BAR) IRIS SEE MANUAL CAUTIONCONNECT TO SPECIFIED CLASS 2 POWER SUPPLY ONLY SEE MANUAL VBS/HD75¶ VD VIDEO/RGB CONTROLVIDEO OUT G/L IN ON OFF RGB monitor or image processing device Red Green Blue Black White WV-CA9T5 WV-CA9T9 or Power supply: 12 V DC, 2A min. Computer RGB/SYNC connector RGB/SYNC connector Conversion Cable WV-CA4C4P To AG-B640 or AU-B110 or Power Cable (locally purchased)
-16- Connection to the RCU (WV-RC700A) is made through the optional conversion cable WV-CA26T20 and a studio cable. 1. Turn RCU power off before connecting cables. 2. Set the cable selection switch of the RCU to MULTI. 3. Connect the 20 pin connector of the conversion cable to the REMOTE Connector of the camera. The conver- sion cable and the studio cable must be connected with the connector supplied as a standard accessory with the conversion cable.4. Turn RCU power on and the power indicator lamp will light. The camera can now be remote controlled by the RCU. NOTES: • Maximum extension length: 300 meters (Studio cables must be connected with joint adaptor WV-CA26T26.) • Use only the specified cables. nCONNECTION OF A REMOTE CONTROLLER (RCU AND A STUDIO CABLE) GEN-LOCKINAUXIN AUTO75¶/Hi-Z AUTO75¶/Hi-Z R/PR /C OUTOUT AUDIOSEE MANUAL VIDEO 1 G/Y/YVIDEO 2 B/PB /BSYNC S-VIDEO 14 23TALLY CAMERA (MULTI) CABLE SELECT FUSE125V 2A TALK INCOM RECEIVECONTROLTALLY & INCOM MULTIOVP MPX MPX OUTPUT ZOOM/FOCUSREMOTE EXT DC IN PAGE ITEM(AWC) UP(ABC)DOWN(BAR) IRIS SEE MANUAL CAUTIONCONNECT TO SPECIFIED CONNECT TO SPECIFIEDCLASS 2 POWER SUPPLY CLASS 2 POWER SUPPLYONLY SEE MANUAL ONLY SEE MANUAL VBS/HD75¶ VD VIDEO/RGB CONTROLVIDEO OUT G/L IN ON OFF Connector supplied with WV-CA26T20 Studio cable (Option) WV-CA26U15 (50 ft/15 m) WV-CA26U30 (100 ft/30 m) WV-CA26U100 (330 ft/100 m) Set to MULTI WV-RC700A Conversion cable (Option) WV-CA26T20 (10 ft/3 m)
-17- nCONNECTION OF A REMOTE CONTROLLER (RCU AND A COAXIAL MULTIPLEX SYSTEM)The optional multiplex adaptor WV-PS550 is used for connection of a coaxial multiplex system. 1. Turn RCU power off before connecting cables. 2. Connect the optional multiplex adaptor WV-PS550 to the control connector of the camera through the stan- dard accessory cable supplied with the WV-PS550. 3. Set the cable selection switch of the RCU to VP. 4. Connect the MPX connector of the multiplex adaptor and that of the RCU with a coaxial cable (Belden 8281 or equivalent). 5. Turn RCU power on and the power indicator lamp will light. The camera can now be remote controlled by the RCU.NOTES: • Use only model WV-RC700A (with WV-CB700A) as an RCU. • A coaxial multiplex system cannot be used with a stu- dio 26-pin cable. • R/G/B, Y/C and Y/PR/PB signals cannot be transmitted through this system. Use a studio cable if any of these signals is required. • The maximum cable extension length allowed for this system is 300 meters. GEN-LOCK INAUX INAUTO 75¶/Hi-ZAUTO 75¶/Hi-ZR/PR /C OUT OUT AUDIOSEE MANUAL VIDEO 1 G/Y/Y VIDEO 2 B/PB /B SYNC S-VIDEO 14 23TALLY CAMERA (MULTI) CABLE SELECT FUSE125V 2A TALK INCOM RECEIVECONTROLTALLY & INCOM MULTI OVP MPX MPX OUTPUT ZOOM/FOCUSREMOTE EXT DC IN PAGE ITEM(AWC) UP(ABC)DOWN(BAR) IRIS SEE MANUAL CAUTIONCONNECT TO SPECIFIED CLASS 2 POWER SUPPLY ONLY SEE MANUAL VBS/HD75¶ VD VIDEO/RGB CONTROLVIDEO OUT G/L IN ON OFF AUDIO CONTROL OUT CAMERA MPX DATA IN AUDIO IN DATA Supplied with WV-PS550 multiplex adaptor WV-PS550 Set to VP WV-RC700A Coaxial cable (Belden 8281 or equivalent)
ALL 1 2USER SET ZOOM/FOCUSREMOTE EXT DC IN PAGE ITEM(AWC) UP(ABC)DOWN(BAR) IRIS SEE MANUAL CAUTIONCONNECT TO SPECIFIED CLASS 2 POWER SUPPLY ONLY SEE MANUAL VBS/HD75¶ VD VIDEO/RGB CONTROLVIDEO OUT G/L IN ON OFF -18- nCONNECTION OF A REMOTE CONTROL BOX (RCB)The RCB (WV-CB700A) and the camera must be connect- ed with the optional conversion cable WV-CA20T10. 1. Turn RCB power off before connecting cables. 2. Connect the 20 pin connector of the conversion cable to REMOTE connector of the camera. The 10-pin con- nector must be connected to the RCB accessory cable or an optional RCB cable. 3. Turn RCB power on and the camera can be remote controlled by the RCB. NOTES: • The monitor output signals of the RCB attenuate and deteriorate with cable length. It is recommended that the signals from the monitor output be used for moni- toring purpose only. • No gen-lock signal is available from the RCB.Power supply: 12 V DC, 2A min. Video signals RCB, Rear view The RCB accessory cable, WV-CA10B25 (80 ft/25 m) or WV-CA10B50 (160 ft/50 m). WV-CB700A 1. Connect this to a 12V DC class 2 power supply only. 2. To prevent fire or shock hazard, the UL listed wire VW-1, style 1007 should be used as for the cable for 12V DC Input Connector.Cautions Conversion Cable WV-CA4C4P To AG-B640 or AU-B110 or Power Cable (locally purchased)Conversion cable WV-CA20T10 (Option) (3 ft/ 1m)