Panasonic Color Televison Tc 29p22 Operating Instructions

							21
Tuning Procedure
Pos. Change
This feature will enable the user to swap (Exchange) channel memory of 2  selected
channels. The position change function allows one to shift from the present channel
to any programme number without any tuning process.
    1.
1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 12
GEOMAGNETIC 8
Note:
Position change also can
operated using panel key.
Use PRESET key to enter
POSITION CHANGE,
then, use volume up/down
to change the channel to
be swapped to. Use TV/AV
to confirm.
Press the "MAIN MENU" and
"Position" buttons, until
"POS. CHANGE" is selected.
    2.Select a Programme number you
want to change by pushing either
Channel UP or DOWN button, two
digit programme selection or Direct
Programme number selection on the
remote control.
(Position change will only exist in
preset mode).
MAIN MENU
PRE.
1
TV/AV12   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 12
GEOMAGNETIC 8Press the "TV/AV" button to confirm.   3.This returns the set to the
normal viewing condition.
MAIN MENUPress the "MAIN MENU"
button twice. 
						

							22
Advanced Remote Control Transmitter Operation
Picture Menu Operation
Helpful Hint
1. By pushing the normal “N” button on the Remote Control while the Picture menu is displayed, the setting of the
selected function will be return to factory setting level.
Push
Item Effect
Indicator
Picture Menu
COLOURSelectLess    More– – –– – – –– – – – – – – –32COLOUR
Select
NTSC-TINT
Greenish   Reddish– – –– – – –– – – – – – – –32NTSC-TINT
Select
BRIGHTDarker   Brighter– – –– – – –– – – – – – – –32BRIGHT
SelectLess    More– – –– – – – –– – – –63CONTRASTCONTRAST
SelectSHARPNESSLess    More– – –– – – –– – – – – – – –32SHARPNESS
SelectCOLOUR TEMP.COLOUR TEMP.
WARM STD COOL
1
MAIN MENU
MAIN MENU
SOUND
DYNAMIC
32  COLOUR
32  NTSC-TINT
32  BRIGHT
63  CONTRAST
32  SHARPNESS
STD     COLOUR TEMPPICTURE 
						

							23
Advanced Remote Control Transmitter Operation
Helpful Hint
1. By pushing the normal “N” button on the Remote Control while the Sound menu is displayed, the setting of the selected
function will be return to factory setting level.
Sound Menu Operation
1
MAIN MENU
MAIN MENU
SOUND
SPEECH
32  BASS
32  TREBLE
32  BALANCE
OFF  BASS BOOST
OFF  LOUDNESS
OFF  AVLPICTURE
Sound Menu
Push
Item Effect
Indicator
Select
Select
Select
BASS
TREBLE
BALANCE
Left SP.  Right SP.Less    More
28BASS
– – –– – – –– – – – – – – –45TREBLE
– – –– – – –– – – – – – – –BALANCE32
Less    More
Select
Select
BASS BOOST
LOUDNESS
ON       OFF ON       OFF
BASS BOOST
LOUDNESS
SelectAV LON       OFFAV L
– – –– – – –– – – – – – – –
AVL (Auto Volume Limiter)
The AVL function will limit the volume output for music, speech and movie at preset level when it is on.
The AVL is not available in AV mode. 
						

							24
1
If BLUE BACK Mode is set on while a VCR signal is
being viewed, selecting CUE or REVIEW may cause
the screen to revert to the blue background colour.
Disable this feature to view correctly.
Note :
Colour density varying between broadcast channels
can be adjusted to three levels for each reception
channel as follows :
CH (Channel) COLOUR SET mode.
To child lock any channel, press the position left or
right button.
1)  When channel is "LOCK", sound is muted and
screen becomes blue colour.
2) If any of the channels is CHILD LOCK, then preset
key at any panel will not work. If preset key (Panel)
is pressed, message "CHILD LOCK ON" will
appear.
3) Main power ON in child locked channel will display
"CHILD LOCK ON" on screen to remind user that
the Child lock is On and is in Child locked channel.
4) Each channel has its own memory for channels to
be child locked.
VCR/Game mode.
Reproduction of irregular signals, such as TV games
and rental video tapes, may be improved.
The VCR/GAME mode will change as shown.
ON                        OFF
CHILD LOCK mode.
STD
HIGH LOW
MAIN MENU
FEATURES
BLUE BACK             ON PICTURE AI              ON
CH COLOUR SET   STD
CHILD LOCK           OFF
VCR/GAME              OFF
BLUE BACK             ON PICTURE AI              ON
CH COLOUR SET   STD
CHILD LOCK           OFF
VCR/GAME              OFF
PICTURE
BLUE BACK             ON PICTURE AI              ON
CH COLOUR SET   STD
CHILD LOCK           OFF
VCR/GAME              OFF
BLUE BACK             ON PICTURE AI              ON
CH COLOUR SET   STD
CHILD LOCK           OFF
VCR/GAME              OFF
BLUE BACK             ON PICTURE AI              ON
CH COLOUR SET   STD
CHILD LOCK           OFF
VCR/GAME              OFF
MAIN MENU
Features Menu Operation
When no picture signal is received, or the signal is
weak, the screen reverts to a blue background colour
and the sound is muted.
Disable this features to continue watching very weak
signals.
BLUE BACK Mode.
Blue background
colour if no input
picture signal or input
signal is weak.
Advanced Remote Control Transmitter Operation
The picture AI continuously detects fine differences in
the picture signal, which great precision, and including
the picture brightness, contrast and etc.
The function Automatically adjusts the picture to the
best quality for the scene, and reproduces images that
provides a sense of depth. The picture AI mode will
change as shown.
ON                        OFF
PICTURE AI mode 
						

							25
Language Menu Operation
Advanced Remote Control Transmitter Operation
Press the "Position Up or Down" button. The on-screen language display will change as follows :
Language Menu
1
MAIN MENU
PICTURE 
						

							26
"Main Menu" condition. The Power should be off when determining the
installation location and direction.
At this time please verify what direction the TV screen
is to face (direction indicated by the arrow).
   1.
Press the "Main Power Switch"   2.
   6.
PRE. TV/AV+ –AV 2 IN– R – L/MONO AUDIO
S-VIDEOVIDEO
MAIN MENU
Select the Preset Menu by using
the Position Left or Right button.   4.MAIN MENU
   3.Press the "MAIN MENU" button.MAIN MENU
Select the Geomagnetic Mode by
using the “Position” button.   5.MAIN MENU
Helpful Hint
(1) If Geomagnetic changes still cause colour patches on the screen even after the TV is installed, turn the power off
and turn back on again after about 30 minutes.
(2) Adjustment for geomagnetic should be performed every time the location of the TV is changed.
(3) In some cases colour patches will not be completely eliminated even after adjustment, particularly in ferro-concrete
building and other structures susceptible to geomagnetic. In these cases adjust by changing the installation location.
Preset Menu Operation
Geomagnetism Correction
Since a large picture tube has been used, blurring of colours and strange discolouration patches may
occur depending on the direction the television faces. This is caused by a geomagnetic effect.
For optimum viewing, it is necessary to adjust the TV placement.
PRESET
PICTURE
88 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS                5.5MHz
COLOUR SYS             AUTO
FINE TUNE
SKIP             OFF
POS. CHANGE           88
GEOMAGNETIC         2
88 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS                5.5MHz
COLOUR SYS             AUTO
FINE TUNE
SKIP             OFF
POS. CHANGE           88
GEOMAGNETIC         288 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS                5.5MHz
COLOUR SYS             AUTO
FINE TUNE
SKIP             OFF
POS. CHANGE           88
GEOMAGNETIC         7
88 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS                5.5MHz
COLOUR SYS             AUTO
FINE TUNE
SKIP             OFF
POS. CHANGE           88
GEOMAGNETIC         AUTO
2)If TV uses Auto Geomagnetic correction:
Align “Auto” to the “1” position in the center using the
position Left “” buttons. If discolouration
remains even after AUTO correction, press the position
Left “” button to adjust the placement so that
the coloured patches in the four corners of the screen
disappear.
Advanced Remote Control Transmitter Operation
1)If TV uses Manual
Geomagnetic correction:
Press the Position Left or Right
button to adjust the Geomagnetic
level so that the colour patches
in the four corners of the screen
do not appear. 
						

							27
Operation of the VCR / LD / DVD
Manufacturer Setting
2.While pressing the VCR/LD/DVD Power
button, press the manufacturer code setting
(enter the two digit code), and press the VCR/
LD/DVD Stop button.
Remote Control Operation is possible for the VCR’s, LD’s and DVD’s of
the various manufacturers.
After completion of setting, execute the various operations after
pushing the VCR or the LD/DVD button.
1.Press the button of the unit to be set (VCR or
LD/DVD).
Note:
After setting, execute operation confirmation.
If there is no operation, set a different code.
Helpful Hint
SURROUND
Panasonic
R-TUNETV/AV
VCR
MAIN MENU
1
4
72
5
83
6
9
0
+
–
PICTURE MENUSOUND MENU
WAKE UPP.    A I
LD ⁄ DVDBDISC SIDEA
SKIP
SKIPN
VCR ⁄ LD ⁄ DVD
2
1
2
2
1
VCR
LD ⁄ DVD
(1) The respective VCR/LD/DVD manufacturer code is cancelled when
battery has been exchanged. Please set is again.
(2) Depending on the model, operation of VCR’s, LD’s or DVD’s of
the manufacturers listed above may not be possible.
(3) In some cases, new products may not be operative.
(4) It will not operate with other than the above manufactures.
1
0
LD
ManufacturerCodeManufacturerCode
Panasonic
10, 11, 12, 13SAMSUNG30
KENWOOD15, 16SHARP35
PHILIPS20SONY40, 41, 42, 43
PIONEER25
DVD
ManufacturerCode
Panasonic
70
VCR
ManufacturerCodeManufacturerCode
Panasonic/ NEC
40, 41, 42, 43
National10, 11, 12, 13ORION45, 46
AIWA15, 16PHILIPS50
FUJITSU20SANYO55, 56, 57, 58
HITACHI25, 26, 27SHARP60, 61
JVC30, 31, 32SONY65, 66, 67
MITSUBISHI35. 36TOSHIBA70, 71 
						

							28
Operation of the VCR / LD / DVD
Execute the various operations after pushing the VCR or LD/DVD button.
ButtonFunction
VCR LD/DVD
1
2
3
4
5
6
7
8
9Rew (Rewind)/
Review Button
VCR Power
Stop Button
Still Advance  Button
Play Button
FF (Fast Forward)/
Cue Button
Rec (Record) Button
Pause/Still Button
Programme Number Up
and Down
Buttons for VCRRew (Rewind)/
Review Button
LD/DVD Power Button
Stop Button
DISC SIDE A
Selection Button
Play Button
FF (Fast Forward)/
Cue Button
DISC SIDE B
Selection Button
Pause/Still Button
Programme Skip
Button
A
B
SKIP
SKIP
SURROUND
Panasonic
R-TUNETV/AV
VCR
MAIN MENU
1
4
72
5
83
6
9
0
+
PICTURE MENUSOUND MENU
WAKE UPP.    A I
LD ⁄ DVDBDISC SIDEA
SKIP
SKIPN
VCR ⁄ LD ⁄ DVD
7
8 6 5
9
2
41
3 
						

							29
Before calling for service, determine the symptoms and make a few simple checks as shown below.
Troubleshooting
Symptoms
PictureSoundChecks
Aerial Location, direction
Connection
Aerial Location, direction
Connection
Electrical Appliances
Cars / Motorcycles
Fluorescent Lamps
Volume
(Check whether the mute function has
been activated on the Remote Control.)
Not plugged into AC outlet
Not switched on
Contrast and Brightness / Volume Setting
(Check by pushing the Power Switch or
 Stand-by Button on the Remote Control.)
Colour Control
Re-tune Channels
Magnetic interference from unshielded
equipment.
Receiver moved while "ON"
Snowy Picture
Multiple Image
Interference
Normal Picture
No Picture
Scrambled No Colour
Colour Patches
Noisy Sound Normal Sound
Noisy Sound
     No Sound
     No Sound
     Weak Sound
     Normal Sound      Normal Sound
Noisy Sound
No Colour
Sound System
Colour System 
						

							30
Specifications
SYSTEMS FUNCTION
1. PAL B,G,H
2. PAL I
3. PAL D,K
4. SECAM B,G
5. SECAM D. K.
6. SECAM K1
7. NTSC M
(NTSC 3.58 / 4.5MHz)
8. NTSC 4.43 / 5.5MHz
9. NTSC 4.43 / 6.0MHz
10. NTSC 4.43 / 6.5MHz
11. NTSC 3.58 / 5.5MHz
12. NTSC 3.58 / 6.0MHz
13. NTSC 3.58 / 6.5MHz
14. SECAM I
15. PAL 60Hz / 5.5MHz
16. PAL 60Hz / 6.0MHz
17. PAL 60Hz / 6.5MHz Power Source :  AC AUTO 110/240V, 50/60Hz
Power Consumption : 180 W
Receiving System :17 SYSTEMS
Playback from special Disc
player and VCR only. Reception of broadcast
transmissions and playback
from video cassette tape
recorders.
Playback from special VCR only.
Receiving Channels :
VHF BAND
UHF BAND
CATV
2 – 12 PAL / SECAM B,K1
0 – 12 PAL B (AUST.)
1 – 9 PAL B (N.Z.)
1 – 12 PAL / SECAM D
1 – 12 NTSC M (JAPAN)
2 – 13 NTSC M (U.S.A.)21 – 69 PAL G,H,I / SECAM G,K,K1
28 – 69 PAL B (AUST.)
13 – 57 PAL D,K
13 – 62 NTSC M (JAPAN)
14 – 69 NTSC M (U.S.A.)S1 – S20  (OSCAR)
1 – 125 (USA CATV)
C13 – C49 (JAPAN)
S21 - S41 (HYPER)
Z1 - Z37 (CHINA)
5A, 9A (AUST.)
Tuning System : Frequency synthesizer Auto search tuning: 100 position.
Picture Tube  : 68 cm, measured diagonally, 104° deflection.
Audio Output : 8 W X 2 (Speaker)
                      : 14 W (Woofer)
Aerial Impedance : 75 Ω Unbalanced coaxial.
Remote Control Transmitter : EUR 511031
Battery : R6 (AA) X 2
Dimension (W X D X H) : 688 x 492 x 582 mm
Weight (Net) : 49 Kg
Note :Design and Specifications are subject to change without notice.
AV 1,2,3
DVD
Monitor OutS-Video In
Y
P
BPR
Video In
Audio In
Video Out
Audio OutY:1 Vp-p, 75 Ω
C: 0.3 Vp-p, 75 Ω
1.0 Vp-p, 75 Ω
0.7 Vp-p, 75 Ω
0.7 Vp-p, 75 Ω
1 Vp-p, 75 Ω
Approx. 0.4V, 47 kΩ
1 Vp-p, 75 Ω
Approx. 0.4V, 1 kΩ Video/audio terminal :