Panasonic Color Televison Tc 29p22 Operating Instructions

							11
General Operation
By pressing the PICTURE MENU button, you can sequentially select the Picture menus
as shown below:
Picture Menu Operation
10.PICTURE MENU
On-screen
DYNAMIC
STANDARD
SOFT
For watching in brighter environments. This
menu selects a higher than normal level of
contrast.
For watching in normal (evening) environments.
This menu selects normal level of contrast.
For watching in dark environments. This menu
selects reduced level of contrast.
Function
Normal ( N ) Button11.
By pressing the SOUND MENU button, you can sequentially select the Sound menus as
shown below:
Sound Menu Operation 12.
On-screenFunction
For music programme for example.
For News programme for example. MUSIC
SPEECH
MOVIE For movie programme for example.
SOUND MENU
13.Wake Up Timer Button
1.  Press the " WAKE UP TIMER" button.
99
99
WAKE UP TIMER                  OFF
WAKE UP TIMER                00:10WAKE UP
2.  Press the position left or right button to select the wake
up timer. (Wake up timer will increase or decrease by
10 minutes when left or right button is pressed.)
Note :
Wake up time can be set up to 12 hours.
3.  After setting the wake up timer, switch the TV set to
stand-by mode. (LED  light will blink ON and OFF
during stand-by mode) By pushing the Normal “N” button on the Remote Control while Picture or Sound Control
Function is displayed, the selected function will be changed to the Normal Mode. Normalization
will not occur if the function is not displayed when the “N” button is pushed. The Normal mode is
the factory preset condition. Returning to this original condition is called “Normalization”. 
						

							12
General Operation
i)  After the Wake Up time is set and the TV mode is still not switched off, the Wake Up timer
will continue to count down until the timer is off.
ii) When Wake Up timer switch ON the TV set, the off timer is set to 90 minutes mode
automatically. Press any button to cancel the off-timer. If no button is pressed, the TV set
will switch off automatically after 90 minutes.
Note :
4.  When the time Wake Up timer has elapsed in the
set will automatically switch on. (Press any button
to cancel the Wake Up timer on screen
display.)WAKE UP TIMER
90
5.  To cancel the Wake Up timer.
You can choose any of the following:
i) Switch off the main power.
ii) Press the position left or right button, until OFF is reached.
iii) Press the NORMALIZE button when Wake Up timer OSD is displayed.
PRESENT CHANNEL
BEING VIEWEDLAST VIEWED
CHANNEL
14.Rapid Tune Button
Push the button to access previously viewed channel.
15.
The benefit of surround sound are enormous. With additional speakers you can be
completely enveloped in sound; just as if you were at a concert hall or cinema.
The surround effect does operate without external surround speakers, but is enhanced
when they are connected. Such near surround speakers should not be sited in direct
proximity to the listeners.
Surround Sound OperationSURROUND
On-screen display during surround mode.
16.
P.    A IThe Picture AI continuously detect fine differences in the picture signal, with great
precision, and including the picture brightness, contrast and etc.
The function Automatically adjusts the picture to the best quality for the scene, and
reproduces images that provide a sense of depth.
The Picture AI mode will change as shown:
                         ON             OFF
Picture AI Mode



Type of broadcast ON-Screen display
STEREO SURROUND
MONO SURROUND
SURROUND OFF

AV mode       TV mode
Select AV  modeMONO
MONO SURROUND
SURROUND OFF 
						

							13
Tuning Procedure
Automatic Tune
Channel Number
Automatic Tune
condition.
Search start.    1.PRE.
Press the Position Right button.
The best tuning position is
automatically memorized.
This returns the set to the
normal viewing condition.
Press the " PRE " (PRESET) button
8 times.   3 .PRE.
After all stations are tuned,
press the "MAIN MENU"
button twice.
 1
OR
22
1
1,31,3
MAIN MENU
PRE. TV/AV+ –AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO– 
MAIN MENU
MAIN MENU
– – l –– – – –– – – – –AUTO TUNE
Press the "MAIN MENU" and
"Position" buttons, until
"AUTO TUNE" function is selected. Press the "PRE" (PRESET) button,
until "AUTO TUNE" function is
selected.
    2.Press the Volume Up " + " button.
1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
MAIN MENU 
						

							14
Tuning Procedure
Manual Tune
– – –– – – –– – – – –
Press either the Channel Up or
Down button.
Search Start.
The best tuning position is
automatically memorized.
   2
    2 .
Press the Position Left or Right
button.
Position left : Next lower Channel.
Position right : Next higher Channel.

PRE.
Select the desired
Channel Number.
2    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 2
GEOMAGNETIC 8
MANUAL TUNE
OR
MAIN MENU
323
1
1,41,4
MAIN MENU
PRE. TV/AV+ –AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO– 
Press the "MAIN MENU" and
"Position" buttons, until
"MANUAL TUNE" function is selected.
Press the "PRE" (PRESET) button
twice, setting the Manual Tune mode.    1 .Channel Number
Manual Tune condition.1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
2    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 2
GEOMAGNETIC 8
Press the Volume Up " + " or Down
" – " button.
Volume " + " : Next higher Channel
Volume " – " : Next lower Channel   3.
MAIN MENU
MAIN MENU
This returns the set to the
normal viewing condition. Press the "PRE" (PRESET)
button 7 times.   4 .PRE.
Press the "MAIN MENU" button
twice. 
						

							15
Tuning Procedure
Fine Tune
Press the Position Left or Right
button until the clear picture is
received.
Press the "PRE" (PRESET)
button 4 times.
Under normal reception condition, this function is not used. However, in areas of poor reception or constant
interference, a slight adjustment on the fine tuning can improve the picture and sound quality.
After all stations are tuned,
press the "MAIN MENU"
button twice.
The AFC (Automatic Frequency
Control) function is deactivated.
The "     " symbol appears to the
left of the Channel Number.
This returns the set to the
normal viewing condition.
    1
PRE.
MAIN MENU
    1 .
    2 .
   3.
   4.
OR
Select the channel which you want
to try to improve, using the Channel
Up or Down buttons.Select the desired
Channel Number.
Press the " PRE." (PRESET)
buttons 5 times, setting the Preset
Menu to "Fine Tune".
PRE.
1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
Press the Volume Up " + " or Down
" – " button until the clear picture is
received. Press the "MAIN MENU" and
"Position" buttons, until
"FINE TUNE" is selected.
– – –– – – –– – – – –

   1
 1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8  
FINE TUNE
Fine Tune Start.Fine Tune condition.
   1
MAIN MENU
MAIN MENU
313
2
2,42,4
MAIN MENU
PRE. TV/AV+ –AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO–  
						

							16
Tuning Procedure
How to cancel the Fine Tuning
Press the " PRE." (PRESET)
buttons twice, setting the Preset
Menu to set to "MANUAL TUNE"
mode.
Press the "PRE" (PRESET)
button 7 times.
Press the "MAIN MENU"
button twice.This returns the set to the
normal viewing condition.
   1
    2.
   3.
   4.
– – –– – – –– – – – – – –

1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
 
  1
PRE.
MANUAL TUNE
MAIN MENU
MAIN MENU
   1.
OR
Cancelling previously adjusted (manually) fine tuning, means re – activating the AFC (Automatic Frequency Control)
Function, also known as AFT (Automatic Frequency Tuning). Re – activating the Automatic Frequency Tuning means
allowing the set to automatically tune optimum tuning position, for that Channel Number.
    1
Press the Position Left or Right
button briefly. Press the Volume Up " + " or Down
" – " button briefly.
The best tuning position is
automatically memorized.Manual Tune condition.
Press the "MAIN MENU" and
"Position" buttons, until "MANUAL
TUNE" function is selected. Select the "AFC OFF" Channel
Number which you want to return to
Automatic Frequency Control
(Cancel the manual fine tuning)."AFC OFF" Channel
Numbers are indicated to
you by the "    " symbol to
the left of the Channel
Number.
1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
313
2
2,42,4
MAIN MENU
PRE. TV/AV+ –AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO– 
PRE.
MAIN MENU 
						

							17
Tuning Procedure
How to Skip Programme Number
The displayed "OFF"
condition changes to "ON".
    1.
    2.
   3.
   4.PRE.
PRE.
Channel Skip condition.
MAIN MENU
MAIN MENU
OR
Press the "MAIN MENU" and
"Position" buttons, until the Preset
Menu to "SKIP" .Press the " PRE." (PRESET)
button 6 times, setting the Preset
Menu to "SKIP".
Select a Programme Number you
want to skip, by pushing the Channel
number Up or Down buttons.
1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
2    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 2
GEOMAGNETIC 8
2    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP ON
POS. CHANGE 2
GEOMAGNETIC 8
Press the Volume Up " + " or Down
 " – " button.
Press the Position Left or Right
button.
This returns the set to the
normal viewing condition. Press the "PRE" button 3 times.
Press the "MAIN MENU"
button twice.
MAIN MENU
323
1
1,41,4
MAIN MENU
PRE. TV/AV+ –AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO–  
						

							18
Press the "MAIN MENU" and
"Position" buttons, until "SKIP"
is selected.
Press the Position Left or Right
button.
After the Skip Cancel Operation is
completed, press the " MAIN MENU "
button twice. Repeat step 2 and 3, if you wish
to cancel the Skip function on
any other programme number.
Channel Skip condition.
    2.
   4.PRE.
MAIN MENU
1    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
Tuning Procedure
How to Cancel the Skip Function
The displayed "ON"
condition changes to "OFF".
MAIN MENU
MAIN MENU
323
1
1,41,4
MAIN MENU
PRE. TV/AV+ –AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO– OR
Press the " PRE." (PRESET)
buttons 6 times, setting the Preset
Menu to "SKIP".   1.PRE.
Press the Volume Up " + " or Down
" – " button.   3.
2    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP ON
POS. CHANGE 2
GEOMAGNETIC 8Select the skipped Programme
Number, by pressing the Channel
Number Up or Down buttons.
2    PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 2
GEOMAGNETIC 8
This returns the set to the
normal viewing condition. After the Skip Cancel operation is
completed, press the " PRE " button
3 times. 
						

							19
Tuning Procedure
Colour System Selection
Use this function if a clear picture with weak colour is obtained when a Broadcast or
AV signal is received.
Press the "MAIN MENU" and
"Position" buttons, until
"COLOUR SYS" is selected.
   1.
   2.
   3.
Press the " PRE." (PRESET)
button 4 times.
This selected Colour System is
automatically memorized. This returns the set to the
normal viewing condition. Colour System condition.PRE.
PRE.
MAIN MENU
OR
MAIN MENU
22
1
1,31,3
MAIN MENU
PRE. TV/AV+ –AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO– 
1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8Press the Volume Up
" + " or Down button,
" – " repeatedly until the
optimum image is
produced.
NTSC 4.43 AUTO
NTSC 3.58






 
PA LSECAMPress the Position Left or
Right button repeatedly
until the optimum image is
obtained.The Colour system will change
as shown:MAIN MENU
Press the "PRE" (PRESET)
button 5 times.
Press the "MAIN MENU"
button twice. 
						

							20
Tuning Procedure
Sound System Selection
Sound System condition.
Press the " PRE." (PRESET)
button 3 times.    1.
Press the "MAIN MENU" and
"Position" buttons, until
"SOUND SYS" is selected.
Press the Volume Up
 " + " or Down button " – "
repeatedly until the optimum
sound is obtained.    2.
Press the Position Left or Right
button repeatedly until the
optimum sound is obtained.
PRE.
Press the "MAIN MENU"
button twice.Press the "PRE" (PRESET) button
6 times.
   3.PRE.
This returns the set to the
normal viewing condition.
This selected Sound System is
automatically memorized. The Sound system will change
as shown:
4.5MHz5.5MHz
6.0MHz6.5MHz









 



1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
This function is used only in the TV mode, and is not applicable in AV mode.
When the sound is not clear or no sound is produced on a channel.
OR
MAIN MENU
MAIN MENU
MAIN MENU
PRE. TV/AV+ –
22
1
1,31,3
MAIN MENU
AV 2 IN
R  – L/MONO AUDIO
S-VIDEOVIDEO–