Panasonic Color Televison Tc 29p22 Operating Instructions

21
Tuning Procedure
Pos. Change
This feature will enable the user to swap (Exchange) channel memory of 2  selected
channels. The position change function allows one to shift from the present channel
to any programme number without any tuning process.
    1.
1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
1   PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 12
GEOMAGNETIC 8
Note:
Position change...

22
Advanced Remote Control Transmitter Operation
Picture Menu Operation
Helpful Hint
1. By pushing the normal “N” button on the Remote Control while the Picture menu is displayed, the setting of the
selected function will be return to factory setting level.
Push
Item Effect
Indicator
Picture Menu
COLOURSelectLess    More– – –– – – –– – – – – – – –32COLOUR
Select
NTSC-TINT
Greenish   Reddish– – –– – – –– – – – – – – –32NTSC-TINT
Select
BRIGHTDarker   Brighter– – –– – – –– – – – – – – –32BRIGHT
SelectLess...

23
Advanced Remote Control Transmitter Operation
Helpful Hint
1. By pushing the normal “N” button on the Remote Control while the Sound menu is displayed, the setting of the selected
function will be return to factory setting level.
Sound Menu Operation
1
MAIN MENU
MAIN MENU
SOUND
SPEECH
32  BASS
32  TREBLE
32  BALANCE
OFF  BASS BOOST
OFF  LOUDNESS
OFF  AVLPICTURE
Sound Menu
Push
Item Effect
Indicator
Select
Select
Select
BASS
TREBLE
BALANCE
Left SP.  Right SP.Less    More
28BASS
– – –– – – –– – – – – –...

24
1
If BLUE BACK Mode is set on while a VCR signal is
being viewed, selecting CUE or REVIEW may cause
the screen to revert to the blue background colour.
Disable this feature to view correctly.
Note :
Colour density varying between broadcast channels
can be adjusted to three levels for each reception
channel as follows :
CH (Channel) COLOUR SET mode.
To child lock any channel, press the position left or
right button.
1)  When channel is "LOCK", sound is muted and
screen becomes blue colour.
2)...

25
Language Menu Operation
Advanced Remote Control Transmitter Operation
Press the "Position Up or Down" button. The on-screen language display will change as follows :
Language Menu
1
MAIN MENU
PICTURE 

26
"Main Menu" condition. The Power should be off when determining the
installation location and direction.
At this time please verify what direction the TV screen
is to face (direction indicated by the arrow).
   1.
Press the "Main Power Switch"   2.
   6.
PRE. TV/AV+ –AV 2 IN– R – L/MONO AUDIO
S-VIDEOVIDEO
MAIN MENU
Select the Preset Menu by using
the Position Left or Right button.   4.MAIN MENU
   3.Press the "MAIN MENU" button.MAIN MENU
Select the Geomagnetic Mode by
using the...

27
Operation of the VCR / LD / DVD
Manufacturer Setting
2.While pressing the VCR/LD/DVD Power
button, press the manufacturer code setting
(enter the two digit code), and press the VCR/
LD/DVD Stop button.
Remote Control Operation is possible for the VCR’s, LD’s and DVD’s of
the various manufacturers.
After completion of setting, execute the various operations after
pushing the VCR or the LD/DVD button.
1.Press the button of the unit to be set (VCR or
LD/DVD).
Note:
After setting, execute operation...

28
Operation of the VCR / LD / DVD
Execute the various operations after pushing the VCR or LD/DVD button.
ButtonFunction
VCR LD/DVD
1
2
3
4
5
6
7
8
9Rew (Rewind)/
Review Button
VCR Power
Stop Button
Still Advance  Button
Play Button
FF (Fast Forward)/
Cue Button
Rec (Record) Button
Pause/Still Button
Programme Number Up
and Down
Buttons for VCRRew (Rewind)/
Review Button
LD/DVD Power Button
Stop Button
DISC SIDE A
Selection Button
Play Button
FF (Fast Forward)/
Cue Button
DISC SIDE B
Selection Button...

29
Before calling for service, determine the symptoms and make a few simple checks as shown below.
Troubleshooting
Symptoms
PictureSoundChecks
Aerial Location, direction
Connection
Aerial Location, direction
Connection
Electrical Appliances
Cars / Motorcycles
Fluorescent Lamps
Volume
(Check whether the mute function has
been activated on the Remote Control.)
Not plugged into AC outlet
Not switched on
Contrast and Brightness / Volume Setting
(Check by pushing the Power Switch or
 Stand-by Button on the...

30
Specifications
SYSTEMS FUNCTION
1. PAL B,G,H
2. PAL I
3. PAL D,K
4. SECAM B,G
5. SECAM D. K.
6. SECAM K1
7. NTSC M
(NTSC 3.58 / 4.5MHz)
8. NTSC 4.43 / 5.5MHz
9. NTSC 4.43 / 6.0MHz
10. NTSC 4.43 / 6.5MHz
11. NTSC 3.58 / 5.5MHz
12. NTSC 3.58 / 6.0MHz
13. NTSC 3.58 / 6.5MHz
14. SECAM I
15. PAL 60Hz / 5.5MHz
16. PAL 60Hz / 6.0MHz
17. PAL 60Hz / 6.5MHz Power Source :  AC AUTO 110/240V, 50/60Hz
Power Consumption : 180 W
Receiving System :17 SYSTEMS
Playback from special Disc
player and VCR only. Reception...