Panasonic Color Laser Printer Kx P8415 Setup Instructions
Here you can view all the pages of manual Panasonic Color Laser Printer Kx P8415 Setup Instructions. The Panasonic manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 51
Settings and Printing MaintenanceSpecifications51 8Select paper size (#), paper source ($) and media type (%). #Paper Size: select the size matched with the transparency tray $Paper source: select AutoSelect Tray %Media Type: select Transparency 9Click OKand print the document. Printing on Transparency # $ %
Page 52
Settings and Printing MaintenanceSpecifications52 1Set the media thickness switch. #Open the left side door (#). The green media thickness switchis located on the paper feeder. $Set the media thickness switchdepending on media as follows: Transparency, Label : set to Middle Envelope: set to Thick 2#Open the multi-purpose tray. $Extend the media support. 3Separate the media guides to the approximate width of the media. Printing on Transparency, Label or Envelope (using Multi-purpose Tray) Printing on...
Page 53
Settings and Printing MaintenanceSpecifications53 4Fan the media, and then tap it on a level surface to avoid media jams or skewed printing. NOTE BReusing media that has been fed through the printer once (for example, after jams) can reduce the life of the consumables and paper path components. 5Insert the media with the printing side upinto the multi-purpose tray. The height of media should not exceed the limit mark on the left guide, or it may cause a media jam. Printing on Transparency, Label or...
Page 54
Settings and Printing MaintenanceSpecifications54 6Adjust the media guides to the media size. 7Display the print window in the application software. 8Select Panasonic KX-P8415printer and clickProperties. ThePanasonic KX-P8415 Propertieswindow is displayed. BThe operation for displaying the Panasonic KX-P8415 Properties window may be different depending on the application software. 9Click the Papertab. Envelope Short-end Printing on Transparency, Label or Envelope Media thickness switch position NOTES...
Page 55
Settings and Printing MaintenanceSpecifications55 10Select paper size (#), paper source ($) and media type (%). #Paper Size: select the media size $Paper source: select Multi-Purpose Tray %Media Type: select the loaded media (Transparency, Label orEnvelope) 11Click OK and print the document.Printing on Transparency, Label or Envelope # $%
Page 56
Settings and Printing MaintenanceSpecifications56 All colors can be defined in terms of three concepts: hue, saturation, and brightness. Hue The qualitative aspect of color we generally perceive, such as “red” or “blue”. Saturation The vividness of the color. Brightness The brightness of the color. A higher brightness provides a lighter image and a lower brightness provides a darker image. The following illustration provides a graphical representation of these three concepts. Moving along the...
Page 57
Settings and Printing MaintenanceSpecifications57 There are two methods of creating a range of colors. Those are called “additive color system” and “subtractive color system”. Additive color system (This system is used by computer monitors.) This system creates a range of colors by combining varying amounts of Red, Green, and Blue (RGB) light, which is generally used in the color monitor. Adding the maximum amount of red, green, and blue light available creates white, on the contrary, black occurs where...
Page 58
Settings and Printing MaintenanceSpecifications58 Subtractive color system (This system is used by color printers.) This system produces color by combining colorants such as inks, toners or paint on media, which is generally used in color printing. The printers create the colors by combining the subtractive primaries: Cyan, Magenta, and Yellow. White occurs where no colorant is applied, on the contrary, combining all these three color in theory yields black. However, to produce more solid black, black...
Page 59
Settings and Printing MaintenanceSpecifications59 Using the Agfa CMM 1Click on theUser-optimized Adjustment button, then click on the Color button in theQuality tab (seepage 37). 2Click on the Use Agfa CMMbutton, then click Adjustment... . The Adjustment window is displayed. Displaying the Adjustment Window Using the Agfa CMM You can adjust the color of your output using the Agfa CMM (Color Management Module). # $ % & ( )* +, -
Page 60
Settings and Printing MaintenanceSpecifications60 Using the Agfa CMM #Brightness Changes the brightness of an image. A higher brightness setting (increasing %) provides a lighter image and a lower brightness setting (decreasing %) provides a darker image. $Contrast Adjusts the range between the darkest and the lightest shades in the image. %Saturation Changes the brightness and vividness of color. Lower saturation settings (decreasing %) provide dull and dark images, and higher saturation settings...