Panasonic Color Laser Printer Kx P8415 Setup Instructions

NOTE
BThis option is available only in Windows 95 and Windows 98.
#Print to the following port
Select the port where the parallel interface cable is connected.
Settings and Printing 
MaintenanceSpecifications31
Setting the Printer Driver
For the functions of other buttons, refer to the Help menu in the
Windows.
Details Tab (Windows 95 / Windows 98)
# 

Settings and Printing 
MaintenanceSpecifications32
The ICC Profile name of the KX-P8415 printer is kpsrgb.icm. To use ICM, it must be
displayed in the [Profiles currently associated with this printer:] box as shown in the window
above. If it is not displayed, perform the following steps in the “Color Management” tab.
1. Click  Add...  .
The “Add Profile Association” window is displayed.
2. Select “Windows\System\Color” or “Windows\System” directory, then select
“kpsrgb”.
3. Click  Add  .
4. Click  OK  ....

Settings and Printing 
MaintenanceSpecifications33
#Shared As
It enables you to share the printer over the network. 
For the detailed information, refer to the Help menu in the Windows.
Sharing Tab (Windows 95 / Windows 98)
#
Setting the Printer Driver 

Settings and Printing 
MaintenanceSpecifications34
Setting the Printer Driver
#
$
%
&

) (
Paper Tab
#Paper Size
Selects a different paper size.
Letter, A4, Legal or Env #10 (Envelope #10) can be selected.
$Layout
Specifies how many pages of your document to print on one piece of paper. The page
border will be printed by clicking on the Print page border check box. *
+ 

Settings and Printing 
MaintenanceSpecifications35
Setting the Printer Driver
%Orientation
Selects Portrait(vertical) or Landscape(horizontal).
Portrait Landscape
&Output order
Specifies whether the document prints face up or face down in the output tray. This
selection is not effective, and Face upis automatically selected in the following cases. 
– when Printing on both sides (duplex printing)in the Setup tab (seepage 40) is
effective.
– when Multi-Purpose Trayis selected in the Paper source(see...

Settings and Printing 
MaintenanceSpecifications36
(Copies
Determines how many copies of the document will be printed.
NOTE
BThe number of copies can also be determined using some application software.
However, it is recommended to set the number of copies using one method, either from
this driver or from an application software to avoid having a printing problem.
)Media Type
Selects the type of media loaded in the media tray or multi-purpose tray. Label, Coated
Paper, Envelope, Card and Paper 2nd Side...

Settings and Printing 
MaintenanceSpecifications37
Quality Tab
Setting the Printer Driver
#
$
%
&

#Self-optimized Adjustment (default setting)
Prints a document in the default setting. Select this mode because usually it is not
needed to change the color setting.
$User-optimized Adjustment
If you want to adjust the color, click on this button.
%Print Mode
Select a mode to print the document either in color or gray scale (monochrome).
Clicking on Color enables you to use color management feature....

Settings and Printing 
MaintenanceSpecifications38
&Color
This feature provides two-color adjustment functions as described below.
n
Use Agfa CMM
Adjusts the brightness, contrast, saturation, or red, green, blue strength of the image.
For the adjustment, refer to “Using the Agfa CMM” (seepage 59).
To have the best color assigned accurately by using Agfa CMM, click on this button,
then click the Rendering Intent.... Select your desired selection (see below) in the
Rendering Intent window. It determines...

Settings and Printing 
MaintenanceSpecifications39
)Color mode
nUse 4 color (CMYK)
Four colors (Cyan, Magenta, Yellow and Black) will be used to print the document.
BHigh Black: ON
Prints the black portion of color graphics using only black toner. Black becomes pure
black. 
This setting is effective only when printing a line art graphic and has no effect for
photo images.
BHigh Black: OFF
Prints the black portion of color graphics using C (CYAN), M (MAGENTA), 
Y (YELLOW) toners. 
nUse 3 color (CMY)
Three...

Settings and Printing 
MaintenanceSpecifications40
Setting the Printer Driver
#Printing on both sides (duplex printing)
Select either Flip on long edgeor Flip on short edge when you want to print on both
sides. Before using this feature, make sure that optional auto duplex printing unit has
been installed and the Duplex Unithas been added to the Installed Options box in the
Optiontab (seepage 42).
Setup Tab
#
$
%
&
)
*
(