Panasonic Color CCTV Camera Wv Cw500 WV CW504SE Series Installation Guide

							Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Installation Guide
Color CCTV Camera
Model No. WV-CW500S/G WV-CW504SE 
						

							2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC 
SHOCK DO NOT OPEN
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to alert 
the user to the presence of 
uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within an 
equilateral triangle is intended 
to alert the user to the presence 
of important operating and 
maintenance (servicing) instruc-
tions in the literature accompa-
nying the appliance.
WARNING:
•   This apparatus must be earthed.
•   Apparatus  shall  be  connected  to  a  mains 
socket  outlet  with  a  protective  earthing  con-
nection.
•   The  mains  plug  or  an  appliance  coupler  shall 
remain readily operable.
•   All work related to the installation of this prod-
uct  should  be  made  by  qualified  service  per -
sonnel or system installers.
•   The  connections  should  comply  with  local 
electrical code.
FOR YOUR SAFETY PLEASE READ THE 
FOLLOWING TEXT CAREFULLY.
WARNING: This apparatus must be earthed. IMPORTANT
The  wires  in  this  mains  lead  are  coloured  in  accor-
dance with the following code.
  Green-and-yellow:  Earth
  Blue:  Neutral
  Brown:  Live
  As  the  colours  of  the  wire  in  the  mains  lead  of 
t h i s   a p p l i a n c e   m a y   n o t   c o r r e s p o n d   w i t h   t h e 
coloured  markings  identifying  the  terminals  in  your 
plug, proceed as follows.
  The  wire  which  is  coloured  green-and-yellow 
must be connected to the terminal in the plug which 
is marked with the letter E or by the earth symbol I 
or coloured green or green-and-yellow.
  The  wire  which  is  coloured  blue  must  be  con-
nected  to  the  terminal  in  the  plug  which  is  marked 
with the letter N or coloured black.
  The  wire  which  is  coloured  brown  must  be  con-
nected  to  the  terminal  in  the  plug  which  is  marked 
with the letter L or coloured red.
We declare under our sole responsibility that the product 
to  which  this  declaration  relates  is  in  conformity  with  the 
standards  or  other  normative  documents  following  the 
provisions of Directives 2006/95/EC and 2004/108/EC.
Wij  verklaren  als  enige  aansprakelijke,  dat  het  product 
waarop  deze  verklaring  betrekking  heeft,  voldoet  aan  de 
volgende  normen  of  andere  normatieve  documenten, 
overeenkomstig  de  bepalingen  van  Richtlijnen  2006/95/
EC en 2004/108/EC.
Vi  erklærer  os  eneansvarlige  for,  at  dette  produkt,  som 
denne  deklaration  omhandler,  er  i  overensstemmelse 
med standarder eller andre normative dokumenter i følge 
bestemmelserne  i  direktivene  2006/95/EC  og  2004/108/
EC.
Vi deklarerar härmed vårt fulla ansvar för att den produkt 
t i l l   v i l k e n   d e n n a   d e k l a r a t i o n   h ä n v i s a r   ä r   i 
ö v e re n s s t ä m m e l s e   m e d   d e   s t a n d a rd e r   e l l e r   a n d r a 
normativa dokument som framställs i direktiv nr 2006/95/
EC och 2004/108/EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota 
tämä  ilmoitus  koskee,  noudattaa  seuraavia  standardeja 
tai  muita  ohjeellisia  asiakirjoja,  jotka  noudattavat 
direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.
Vi  erklærer  oss  alene  ansvarlige  for  at  produktet  som 
denne  erklæringen  gjelder  for,  er  i  overensstemmelse 
m e d   f ø l g e n d e   n o r m e r   e l l e r   a n d r e   n o r m g i v e n d e 
dokumenter  som  følger  bestemmelsene  i  direktivene 
2006/95/EC og 2004/108/EC.
CAUTION:
An  ALL-POLE  MAINS  SWITCH  with  a  contact 
separation of at least 3 mm in each pole shall be 
incorporated  in  the  electrical  installation  of  the 
building.
Turn the power off at the mains to disconnect the 
main power for all unit. 
						

							3
Important safety instructions
 1)  Read these instructions.
  2)  Keep these instructions.
  3)  Heed all warnings.
  4)  Follow all instructions.
  5)  Clean only with dry cloth.
  6)  Do  not  block  any  ventilation  openings.  Install  in  accordance  with  the  manufacturer's  instruc-
tions.
  7)  Do not install near any heat sources such as radiators, heat registers, stoves, or other appara-
tus (including amplifiers) that produce heat.
  8)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 
two  blades  with  one  wider  than  the  other.  A  grounding  type  plug  has  two  blades  and  a  third 
grounding prong. The wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  9)  Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs,  convenience 
receptacles, and the point where they exit from the apparatus.
  10)  Only use attachments/accessories specified by the manufacturer.
 
11)  Use  only  with  the  cart,  stand,  tripod,  bracket,  or  table  specified  by  the  manufacturer,  or  sold 
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
  12)  Unplug this apparatus during lightning storms or when unused for long pe\
riods of time.
S3125A 
						

							4
Limitation of liability
THIS  PUBLICATION  IS  PROVIDED  "AS  IS"  WITHOUT  WARRANTY  OF  ANY  KIND,  EITHER 
EXPRESS  OR  IMPLIED,  INCLUDING  BUT  NOT  LIMITED  TO,  THE  IMPLIED  WARRANTIES  OF 
MERCHANTABILITY,  FITNESS  FOR  ANY  PARTICULAR  PURPOSE,  OR  NON-INFRINGEMENT  OF 
THE THIRD PARTY’S RIGHT. 
THIS  PUBLICATION  COULD  INCLUDE  TECHNICAL  INACCURACIES  OR  TYPOGRAPHICAL 
ERRORS. 
CHANGES  ARE  ADDED  TO  THE  INFORMATION  HEREIN,  AT  ANY  TIME,  FOR  THE  IMPROVE-
MENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). 
    
Disclaimer of warranty
IN  NO  EVENT  SHALL  Panasonic  Corporation  BE  LIABLE  TO  ANY  PARTY  OR  ANY  PERSON, 
EXCEPT  FOR  REPLACEMENT  OR  REASONABLE  MAINTENANCE  OF  THE  PRODUCT,  FOR  THE 
CASES, INCLUDING BUT NOT LIMITED TO BELOW: 
 (1)  ANY  DAMAGE  AND  LOSS,  INCLUDING  WITHOUT  LIMITATION,  DIRECT  OR  INDIRECT,  SPE-
CIAL,  CONSEQUENTIAL  OR  EXEMPLARY,  ARISING  OUT  OF  OR  RELATING  TO  THE  PROD-
UCT; 
  (2)  PERSONAL  INJURY  OR  ANY  DAMAGE  CAUSED  BY  INAPPROPRIATE  USE  OR  NEGLIGENT 
OPERATION OF THE USER; 
  (3)  UNAUTHORIZED  DISASSEMBLE,  REPAIR  OR  MODIFICATION  OF  THE  PRODUCT  BY  THE 
USER; 
  (4)  INCONVENIENCE  OR  ANY  LOSS  ARISING  WHEN  IMAGES  ARE  NOT  DISPLAYED,  DUE  TO 
ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT; 
  (5)  ANY  PROBLEM,  CONSEQUENTIAL  INCONVENIENCE,  OR  LOSS  OR  DAMAGE,  ARISING 
OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY.  
						

							5
Contents
Important safety instructions ........................................................................\
................................. 3
Limitation of liability  ........................................................................\
............................................... 4
Disclaimer of warranty  ........................................................................\
........................................... 4
Preface  ........................................................................\
.................................................................. 6
Features  ........................................................................\
................................................................. 6
About the user manuals  ........................................................................\
........................................ 7
Trademarks and registered trademarks........................................................................\
................. 7
Precautions  ........................................................................\
........................................................... 8
Precautions for Installation  ........................................................................\
.................................. 10
Major operating controls and their functions  ........................................................................\
...... 12
Preparations  ........................................................................\
........................................................ 14
Camera installation  ........................................................................\
.............................................. 18
Make a connection  ........................................................................\
.............................................. 29
About the setup menus  ........................................................................\
....................................... 32
Troubleshooting  ........................................................................\
................................................... 37
Specifications  ........................................................................\
...................................................... 38
Standard accessories  ........................................................................\
.......................................... 40
Optional Accessories  ........................................................................\
.......................................... 40 
						

							6
Preface
This  product  is  a  1/3-inch  type  {1/3"}  CCD  color  CCTV  camera.  Connection  of  this  product  to  a 
video monitor allows users to use this product as a monitoring camera. 
	 •	 WV-CW504:	24	V	AC,	12	V	DC	power	supply
	 •	 WV-CW500:	220	to	240	V	AC	power	supply
    
Features
Introduction of SUPER-D5 (super dynamic function)
Integration  of  SUPER-D5  into  the  CCD  and  signal  processing  circuit  has  achieved  approximately 
160 times higher dynamic range as compared with conventional camera. Thanks to the integration 
of  the  darkness  compensation  function,  a  subject  on  which  much  illuminance  difference  exists 
resulting from bright and dark areas can be naturally displayed in an image. 
Introduction of newly developed high-resolution CCD
The introduction of the newly developed CCD with 976 of horizontal pixels has led to the horizontal 
resolution of as high as 650 TV lines (typ.).  
Auto back focus (ABF) function equipped
Moving  the  CCD  inside  the  camera  to  an  optimal  position  with  the  operation  button  of  this  unit  or 
the setup menu allows users to automatically adjust the back focus. 
The back focus is adjustable with the setup menu through the system controller (option) even after 
installation of this unit. 
The  auto  back  focus  function  also  allows  users  to  correct  out  of  focus  when  changing  between 
color and black-and-white images. 
High sensitivity achieved thanks to noise reduction function
The  introduction  of  low  noise  circuit  design  has  achieved  excellently  high  sensitivity  resulting  in  the 
minimum illuminance of 0.1 lx in the color mode and 0.01 lx in the black\
-and-white mode. 
Night monochrome image activation function equipped
No operation is required at night because the image automatically changes from the color mode to 
the black-and-white mode at low illuminance. 
Intelligent VMD (i-VMD) functions of motion detection and object aband\
onment/removal 
detection equipped
The motion and abandonment/removal of an object are detectable. 
The states of covering the camera with a cloth, a cap or others and changing the camera direction 
notably can be detected (Scene change detection).
The  detection  resolution  has  been  significantly  improved  as  compared  with  a  conventional  type, 
and  the  introduction  of  the  newly  developed  detection  method  has  improved  detection  accuracy 
under the condition that the motion detection is prone to malfunction due to leaves swaying.  
						

							7
About the user manuals
Trademarks and registered trademarks
The  operating  instructions  of  the  camera  consist  of  2  sets:  this  book  and  Operating  Instructions 
(PDF). 
This book explains how to install the camera. 
Refer  to  the  "Operating  Instructions  (PDF)"  on  the  provided  CD-ROM  for  descriptions  of  how  to 
perform  the  unit  settings.  Adobe
®  Reader®  is  required  to  read  the  PDF  file  (the  Operating  Instruc-
tions) on the provided CD-ROM. 
When  the  Adobe
®  Reader®  is  not  installed  on  the  PC,  download  the  latest  Adobe®  Reader®  from 
the Adobe web site and install it. 
Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated 
in the United States and/or other countries. 
Note:
	 •	 The 	i-VMD 	function 	is 	not 	the 	dedicated 	function 	to 	prevent 	thefts, 	fires, 	etc. 	We 	are 	not	
responsible for any accidents or damages occurring in case. 
Optional heater unit can be connected
When  using  the  optional  heater  unit,  the  product  can  be  used  at  temperatures  within  –30  °C  to 
+50 °C and humidity below 90 %.
     
						

							8
Precautions
The following points as well as the con-
tents of "Warning" and "Caution" shall be 
observed. 
Refer installation work to the dealer. 
Installation work requires technique and experi-
ences.  Otherwise  injury,  or  damage  to  the 
product may result. 
Be sure to consult the dealer. 
Do not insert objects inside the product. 
If  water  or  metallic  items  enter  the  product,  it 
may cause fire or electric shock. 
Turn  the  power  off  immediately  and  contact 
qualified service personnel for service. 
Do not attempt to disassemble or modify 
the product. 
Failure  to  observe  this  may  cause  fire  or  elec-
tric shock. 
Consult the dealer for the repair or inspections. 
Stop operation immediately when some-
thing is wrong with the product. 
When  smoke  goes  up  from  the  product  or  the 
smell  of  smoke  comes  from  the  product,  con-
tinued use will result in fire, injury, or damage to 
the product. 
Turn  the  power  off  immediately  and  contact 
qualified service personnel for service. 
Select an installation area that can sup-
port the total weight. 
Selecting  an  inappropriate  installation  surface 
may  cause  the  product  to  fall  down  or  topple 
over, resulting in injury. 
Installation  work  shall  be  started  after  sufficient 
reinforcement. 
Periodic inspections shall be conducted. 
Rust  on  the  metal  parts  or  screws  may  cause 
the product to fall down resulting in injury. 
Consult the dealer for the inspections. This product shall be installed in a vibra-
tion-free place. 
Failure  to  observe  this  may  cause  screws  and 
bolts  to  be  loosened  and  consequently  to  fall 
resulting in injury. 
Install this product high enough to ensure 
that people don't hit their heads. 
Failure  to  observe  this  may  cause  a  drop 
resulting in injury or accidents. 
Do not strike or give a strong shock to this 
product. 
Failure to observe this may cause injury or fire. 
Be sure to turn off the power before wir-
ing. 
Failure  to  observe  this  may  cause  electric 
shock.  A  short  circuit  or  wrong  wiring  may 
cause fire.
Do not use the product in an atmosphere 
of flammable gases. 
Failure  to  observe  this  may  cause  injury  by 
explosion. 
Avoid installing the product in locations 
where it is subject to damage by salt or 
corrosive gas. 
Otherwise  the  mounting  fixtures  will  deterio-
rate,  causing  the  product  to  fall  down  and 
leading to accidents. 
Use the specified mount bracket. 
Failure  to  observe  this  may  cause  a  drop 
resulting in injury or accidents. 
Do not rub the edges of metal parts with 
your hand. 
Failure to observe this may cause injury. 
Tighten screws and mounting fixtures to 
the specified torque. 
Failure  to  observe  this  may  cause  a  drop 
resulting in injury or accidents.  
						

							9
[Precautions for use]
This product has no power switch. 
Turn the power off when cleaning the product. 
To keep on using with stable performance
Parts  of  this  product  may  deteriorate  and  it 
may  shorten  the  lifetime  of  this  product  when 
using  in  locations  subject  to  high  temperatures 
and  high  humidity.  (Recommended  operating 
temperature: +35 °C or lower)
Do  not  expose  this  product  to  direct  heat 
sources such as a heater. 
Handle this product with care. 
Do  not  abuse  this  product.  Avoid  striking, 
shaking,  etc.  The  product  could  be  damaged 
by  improper  handling  or  storage.  If  a  strong 
shock or vibration is applied to the enclosure, it 
may cause damage or allow water to enter this 
product. 
Do not touch the dome cover with your 
bare hands. 
A dirty dome cover causes deterioration of pic-
ture quality. 
Discoloration on the CCD color filter
When  continuously  shooting  a  bright  light 
source  such  as  a  spotlight,  the  color  filter  of 
the  CCD  may  have  deteriorated  and  it  may 
cause  discoloration.  Even  when  changing  the 
fixed  shooting  direction  after  continuously 
shooting  a  spotlight  for  a  certain  period,  the 
discoloration may remain. 
Do not aim this product at strong light 
sources. 
A  light  source  such  as  a  spot  light  causes  a 
blooming  (light  bleeding)  or  a  smear  (vertical 
lines). Cleaning this product body
Turn the power off when cleaning the product.
Do  not  use  strong  abrasive  detergent  when 
cleaning  this  product.  Otherwise,  it  may  cause 
discoloration.  When  using  a  chemical  cloth  for 
cleaning,  read  the  caution  provided  with  the 
chemical cloth product. 
To remove stubborn stains
When  the  dirt  is  hard  to  remove,  use  a  mild 
detergent  and  wipe  gently.  Then,  wipe  off  the 
remaining detergent with a dry cloth. 
What to do if OVER HEAT appears on the 
display
This  message  indicates  that  the  inside  of  the 
camera has become extremely hot. Immediate-
ly turn off the power of the camera and contact 
your dealer. 
About the dehumidifying device
	 •	 This
	product 	has 	dehumidifying 	device 	to	
keep  the  inside  at  low  moisture  level,  pre-
venting condensation. 
	 •	 Dew	 may	be	produced	 depending	 on	the	
conditions of temperature, humidity, winds, 
and rain, and it may take time to dehumidi-
fy. 
	 •	 Never	 seal	the	surfaces	 of	the	 dehumidify-
ing device. 
Dehumidifying device
Smear Blight subject
Blooming 
						

							10
Precautions for Installation
Installation work shall be performed in 
accordance with the technology standard 
of the electric installation.
The product is designed to be installed 
under eaves. 
Keep the product out of direct sunlight. 
Installing place
Contact  your  dealer  for  assistance  if  you  are 
unsure  of  an  appropriate  place  in  your  particu-
lar environment. 
	 •	 Make	sure 	that 	the 	installation 	area 	is	
strong  enough  to  hold  the  product,  such 
as a concrete ceiling. 
	 •	 Install	 the	camera	 in	the	 foundation	 area	of	
the  architecture  or  where  sufficient 
strength is assured. 
	 •	 If	 a	ceiling	 board	such	as	plaster	 board	is	
too  weak  to  support  the  total  weight,  the 
area shall be sufficiently reinforced. 
Avoid installing this product in the follow-
ing locations.
	 •	 Locations	 where	a	chemical	 agent	is	used	
such as a swimming pool.
	 •	 Locations	 subject	to	steam	 and	oil	smoke	
such as a kitchen, Locations near flamma-
ble gas or vapor.
	 •	 Locations 	where 	radiation 	or 	x-ray 	emis -
sions are produced.
	 •	 Locations 	where 	corrosive 	gas 	is 	pro -
duced,  Locations  where  it  may  be  dam -
aged by briny air such as seashores.
	 •	 Locations 	where 	the 	temperature 	is 	not	
within  –10  °C  to  +50  °C.  (When  using  the 
optional  heater  unit,  the  product  can  be 
used  at  temperatures  within  –30  °C  to 
+50 °C and humidity below 90 %.)
	 •	 Locations	 subject	to	vibrations.	 (This	prod-
uct is not designed for on-vehicle use.) 
     Avoid moist or dusty places to install this 
system.
Otherwise,  lifetime  of  the  internal  parts  may  be 
shortened. 
Avoid installing the camera in a place with 
a high level of noise. 
Installation near an air conditioner, an air clean-
er, a vending machine, or the like causes noise. 
Be sure to remove this product if it is not 
in use. 
Keep the camera cable away from the 
lighting cable. 
Failure to observe this may cause noise. 
Radio interference
When the camera is used near TV/radio anten-
na, strong electric field or magnetic field (near a 
motor  or  a  transformer),  images  may  be  dis-
torted and noise sound may be produced. 
In  such  a  case,  run  the  camera  cable  through 
specialized steel conduit tubes. 
Locally procure the screws 
Screws are not supplied with this product. Pre-
pare  the  screws  according  to  the  material, 
structure,  strength  and  other  factors  of  the 
mounting  area  and  the  total  weight  of  objects 
to be mounted.
    
The following points as well as the contents of "Warning" and " 
Caution" shall be observed.