Panasonic Color CCTV Camera Wv Cs580 Wv Cs584 Installation Guide

							Before attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future use. 
The model number is abbreviated in some descriptions in this manual.
Installation Guide
Color CCTV Camera
Model No. WV-CS580/G 
WV-CS584E 
						

							2
WARNING:
•  This apparatus must be earthed. •   Apparatus shall be connected to a mains socket outlet with  a protective earthing connection.•   The mains plug or an appliance coupler shall remain readily  operable.•   To prevent fire or electric shock hazard, do not expose this  apparatus to rain or moisture.•   The apparatus should not be exposed to dripping or  splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.•   All work related to the installation of this product should be  made by qualified service personnel or system installers.•   For PERMANENTLY CONNECTED APPARATUS provided  neither with an all-pole MAINS SWITCH nor an all-all pole circuit breaker, the installation shall be carried out in accor-dance with all applicable installation rules.•   The connections should comply with local electrical code. •   To prevent injury, this apparatus must be securely attached  to the floor/wall/ceiling in accordance with the installation instructions.
The exclamation point within an  equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 
Turn the power off at the mains to disconnect the main  power for all unit.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosurethat may be of sufficient magnitude to constitute a risk of electric shock to persons.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING  TEXT CAREFULLY. 
WARNING:  This apparatus must be earthed. 
IMPORTANT 
The wires in this mains lead are coloured in accordance with  the following code. Green-and-yellow: Earth Blue:  Neutral Brown:  Live  As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.  The wire which is coloured  green-and-yellow must be  connected to the terminal in the plug which is marked with the letter  E or by the earth symbol  or coloured green or  green-and-yellow .   The wire which is coloured  blue must be connected to the  terminal in the plug which is marked with the letter  N or  coloured  black.   The wire which is coloured  brown must be connected to  the terminal in the plug which is marked with the letter  L or  coloured  red.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC  SHOCK DO NOT OPEN
CAUTION: 
An ALL-POLE MAINS SWITCH with a contact separation  of at least 3 mm in each pole shall be incorporated in the electrical installation of the building.
Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das  sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.
Nous déclarons sous notre propre responsabilité que le produit auquel se réfère la présente déclaration est conforme aux normes spécifiées ou à tout autre document normatif conformément aux dispositions des directives 2006/95/CE et 2004/108/CE.
Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con las normas u otros documentos normativos siguiendo las estipulaciones de las directivas 2006/95/CE y 2004/108/CE.
Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive 2006/95/CE e 2004/108/CE.
Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 2006/95/EC en 2004/108/EC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 2006/95/EC og 2004/108/EC.
Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med de standarder eller andra normativa dokument som framställs i direktiv nr 2006/95/EC och 2004/108/EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som følger bestemmelsene i direktivene 2006/95/EC og 2004/108/EC.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. 
						

							3
Contents
Important safety instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 
Limitation of liability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . 5 
Disclaimer of warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . 5 
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . 5 
Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 
About the user manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 6 
Trademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . 7 
Precautions for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . 9 
Major operating controls  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 11 
DIP switch settings   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . 12 
  Communication Parameters (DIP Switch 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 
  Unit Number (DIP Switch 1)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 
  RS485 Communication Parameters (DIP Switch 1)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 
Camera Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . 16 
  Preparing the Camera and Decorative Cover for Side Cable Exit . . . . . . . . . . . . . . . . . . 17 
  Installing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 
Uninstalling the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 19 
  Removing the Decorative Cover  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 
  Uninstalling the Camera   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . 20 
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . 22 
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . 26 
Standard accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 27 
Optional accessories   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 
						

							4
Important safety instructions
  1)  Read these instructions. 
  2)  Keep these instructions.
  3)  Heed all warnings.
  4)  Follow all instructions.
  5)  Do not use this apparatus near water.
  6)  Clean only with dry cloth.
  7)  Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
 8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat. 
  9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or 
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet. 
  10)  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus. 
  11)  Only use attachments/accessories specified by the manufacturer. 
  12)  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 
13)  Unplug this apparatus during lightning storms or when unused for long periods of time. 
14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged  
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been 
dropped.
S3125A 
						

							5
Limitation of liability
THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY 
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTYS RIGHT.
Preface
IN NO EVENT SHALL Panasonic System Networks Co., Ltd.BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT 
FOR REPLACEMENT OR REASONABLE MAINTENANCE OF  THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT  
LIMITED TO BELOW: 
(1)   ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, 
 CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2)   PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE  
 USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
(4)   INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR 
 CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5)   ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM 
 COMBINED BY THE DEVICES OF THIRD PARTY;
(6)   ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC
 SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERAS PICTURE,  
 INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE;
(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE. 
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES  
ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION 
AND/OR THE CORRESPONDING PRODUCT (S). 
This color CCTV camera is a video surveillance device that incorporates a ¼-type CCD, a 36x zoom lens, preset and  
pan and tilt capabilities in a dome configuration.
Disclaimer of warranty 
						

							6
Super Dynamic 6 (SUPER-D6)
SUPER-D6 can capture clear images of subjects  
whose illumination is extremely different. 
New DSP for high sensitivity
A new noise reduction system lowers minimum illumi-
nance to 0.5 lx in the color mode and 0.04 lx in the 
black-and-white mode. 
Auto night time switching to black- 
and-white mode 
The camera can be configured to switch to the black- 
and-white mode automatically under low light condi-
tions for clear images, even at night. 
Digital flip 
Normally, a camera needs to stop when it points 
straight down during a tilt operation. With digital flip, 
however, the camera is able to tilt from 0° to 180° in a 
single motion. This makes it possible to track subjects 
passing directly under the camera more smoothly. 
Privacy zone function 
The privacy zone function can mask specific areas of 
the scene from view. 
Patrol function 
The patrol function can store manual camera move-
ment routines for automatic playback. For example, 
you can set the camera the movements of the people 
to be monitored, by replaying the stored parameters 
complicated movements are done automatically. 
Camera position memory
The system can be configured with up to 256 camera 
positions. A particular camera position can be selected 
and viewed by entering the applicable preset number 
on the system controller 10-key pad. 
Motion detection 
The system can be configured so any motion on the 
monitor screen during surveillance causes output of an 
alarm signal. 
Features
    Tilting      downwards.      The picture is flipped      when the camera is     pointing straight down     (at around 135°).  
    Tilting upwards.
 Digital flip is performed only when the system controller joystick is held downwards. 
Digital Flip Operation
About the user manuals
Trademarks and registered trademarks
The operating instructions of the camera consist of 2  
sets: this book and operating instructions (PDF).
This book explains how to install the camera.
Refer to the Operating Instructions (PDF) on the pro-
vided CD-ROM for descriptions of how to perform the  
unit settings. Adobe® Reader® is required to read PDF.  
When the Adobe® Reader® is not installed on the PC, 
download the latest Adobe® Reader® from the Adobe 
web site and install it. 
Adobe and Reader are either registered trademarks or  
trademarks of Adobe Systems Incorporated in the 
United States and/or other countries. 
						

							7
Precautions
The following points as well as the contents of Warning  
and Caution shall be observed.
Refer installation work to the dealer. 
Installation work requires technique and experiences.  
Otherwise injury, or damage to this product may result. 
Be sure to consult the dealer.  
Do not insert any foreign objects. 
This could permanetly damage this product. Turn the  
power off immediately and contact qualified service 
personnel for service. 
Do not attempt to disassemble or modify this  
product. 
Failure to observe this may cause   re or electric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when something is  
wrong with this product.  
When smoke goes up from this product or the smell  
of smoke comes from this product, continued use will 
result in  re, injury, or damage to the product. 
Turn the power off immediately and contact qualified 
service personnel for service.  
Select an installation area that can support the total  
weight.  
Selecting an inappropriate installation surface may  
cause the product to fall down or topple over, resulting 
in injury. 
Installation work shall be started after sufficient 
reinforcement.  
Periodic inspections shall be conducted. 
Rust on the metal parts or screws may cause the  
product to fall down resulting in injury or accidents.
Consult the dealer for the inspections.  
Do not damage the power cable. 
Do not damage, fabricate, twist, stretch, bundle, or  
forcibly bend the power cable. Do not place heavy 
objects. Keep away from heat sources.
Use of the damaged power cable may cause electric 
shock, short circuit, or   re.  
Consult the dealer for repair. 
This product shall be installed in a vibration-free  
place.   
Failure to observe this may cause screws and bolts to  
be loosened and consequently to fall resulting in injury. 
Install this product high enough to ensure that  
people dont hit their heads.  
Failure to observe this may cause a drop resulting in  
injury or accidents.  
Do not strike or give a strong shock to this product.
Failure to observe this may cause injury or  re.
Turn the power off when do wiring of this product. 
Failure to observe this may cause electric shock. In  
addition, short circuit or wrong wiring may cause   re. 
Do not use this product in an atmosphere of  
fl  ammable gases.  
Failure to observe this may cause injury by explosion.  
Avoid installing this product in locations where it is  
subject to damage by salt or corrosive gas. 
Otherwise the mounting  xtures will deteriorate, causing  
the product to fall down and leading to accidents.  
Use the specifi  ed mount bracket. 
Failure to observe this may cause a drop resulting in  
injury or accidents. 
Do not rub the edges of metal parts with your hand. 
Failure to observe this may cause injury.  
Tighten screws and mounting fi  xtures to the  
specifi  ed torque.  
Failure to observe this may cause a drop resulting in  
injury or accidents.  
The measures of protection against a fall of this  
product shall be taken. 
Failure to observe this may cause a drop resulting in  
injury or accidents. 
Do not touch the main body while this product is  
panning/tilting. 
Fingers may be caught up in the moving part, and that 
may result in injury. 
						

							8
[Precautions for use] 
This product has no power switch.  
When turning off the power, turn off a circuit breaker. 
To keep on using with stable performance
Parts of this product may deteriorate and it may shorten  
the lifetime of this product when using in locations subject 
to high temperatures and high humidity. 
Do not expose this product to direct heat sources such 
as a heater.  
Handle this product with care.  
Do not drop this product, nor apply shock or vibration  
to this product.
Failure to observe this may cause trouble. 
Do not touch the dome cover with your bare hands. 
A dirty dome cover causes deterioration of picture  
quality. 
Discoloration on the CCD color fi  lter  
When continuously shooting a bright light source  
such as a spotlight, the color filter of the CCD may 
have deteriorated and it may cause discoloration. 
Even when changing the  xed shooting direction after 
continuously shooting a spotlight for a certain period, 
the discoloration may remain.  
Do not aim this product at strong light sources.  
A light source such as a spot light causes a blooming  
(light bleeding) or a smear (vertical lines). 
Blooming 
Smear Bright subject
Cleaning this product body 
Turn the power off when cleaning this product. Do  
not use strong abrasive detergent when cleaning this 
product. Otherwise, it may cause discoloration. 
About the self-diagnosis function 
When this product malfunctions due to exogenous  
noise, etc. for 30 seconds or more, the product will 
automatically reset and will return to normal state. When 
the product is reset, initialization will be carried out 
as when the power of the product is turned on. When 
the product repeatedly resets, exogenous noise level 
around the product may be high and that may cause 
malfunction. Contact your dealer for instructions. 
Lens and pan/tilt head 
If a lens and pan/tilt head are not performed for a long 
period of time, the grease coating inside these parts 
may become sticky. That may obstruct the parts from 
moving. To prevent this, move the lens or pan/tilt head 
periodically. Or perform position refresh periodically.  
About the position refresh function 
Noise may be produced or the preset positions may  
become inaccurate after a long operation.
Execute the REFRESH operation periodically, the 
camera position will be corrected, and it is also 
recommended to clean the slip ring of the camera. 
Refer to the operating instructions (PDF) for further 
information. 
Consumable parts 
The following are consumables: Replace them in  
accordance with their lives. Their lives vary depending 
on use environment and conditions. 
Lens unit, slip ring: Approx. 3.7 million operations 
(Lifetime around 20000 hours is just an indication when 
using the camera at +35 °C.) 
Synchronous mode setting 
Image synchronous mode of this camera indicates  
internal synchronization (INT) only. Set the multiplex 
vertical driver (VD2) as OFF when the camera is 
connected to the system controller of the company. 
						

							9
Precautions for installation
The following points as well as the contents of  
Warning and Caution shall be observed. 
Panasonic assumes no responsibility for injuries or  
property damage resulting from failures arising out 
of improper installation or operation inconsistent 
with this documentation.
Installation work shall be performed in accordance with 
the technology standard of the electric installation.
Camera Installation Location 
 Install the camera on a ceiling (concrete, etc.) at a  
location that is suf  ciently strong to support it.  
 When installing the camera on a ceiling of 
insufficient strength (like a drop ceiling), use the 
optionally available WV-Q105 Direct Attachment 
Ceiling Mounting Bracket or the WV-Q126 
Embedded Ceiling Mount Bracket. 
 For ceiling mounting, use the optionally available 
WV-Q117 Ceiling Mount Bracket. 
 For wall mounting, use the optionally available 
WV-Q118 Wall Mount Bracket.  
This product is an indoor camera. It is not designed  
for outdoor use. 
This product is designed for use in a hanging con- 
figuration only. Using it in an upright or inclined 
configuration can cause malfunction and shorten 
the life of the camera. 
Install this product in a horizontal configuration,  
with the dome pointed downwards. 
Avoid installing this product in the following loca- 
tions.  
 Areas directly exposed to rain and water 
 Near a swimming pool or other areas where 
chemicals are used
 Food preparation areas and other locations where 
there are large amounts of steam vapour and oil, in 
  ammable atmospheres, other special environments 
 Areas where radiation, X-rays, strong electric waves, 
or magnetism is generated 
 At sea, in coastal areas, or in areas where corrosive 
gas is being generated 
 Areas outside of the allowable ambient operating 
temperature range (-10 °C to +50 °C)
 In a motor vehicle, on a boat, or other areas subject 
to strong vibration (This camera is not designed for 
use in a vehicle.) 
 Near an air conditioner outlet, near a door that 
opens up to the outdoors, or any other area 
subjected to temperature extremes (Such conditions 
can cause clouding and condensation formation on 
the dome cover.)  
  When wiring this product, its cables (power, video  
output, RS485, alarm in, alarm out) can exit out the 
side or the top of this product.  
 When using the top cable exit con guration, drill a  
hole in the ceiling to allow passage of the cables. 
(See step 3 on page 17.) 
 When using the side cable exit configuration, 
prepare the cut-out in the die cast case and 
decorative cover. (See “Preparing the Camera and 
Decorative Cover for Side Cable Exit” on page 17.)
Avoid installing this product in a place with a high 
level of noise. 
Installation near an air conditioner, an air cleaner, a  
vending machine, or the like causes noise. 
Remove the cover film from the dome section of the 
dome cover after the installation is complete. 
Be sure to remove this product if it is not in use.
Keep this product cable away from the lighting cable.
Conduct the power distribution work to keep a distance  
of 1 m or more from the 220 V - 240 V power line. Or 
conduct the electric conduit work separately.
Failure to observe this may cause noise. 
Radio interference
When this product is used near TV/radio antenna,  
strong electric  eld or magnetic  eld (near a motor or a 
transformer), images may be distorted and noise sound 
may be produced. In such a case, run the camera 
cable through specialized steel conduit tubes. 
Locally procure the screws
Screws are not supplied with this product. Prepare the 
screws according to the material, structure, strength 
and other factors of the mounting area and the total 
weight of objects to be mounted.
Beware of high humidity. 
If the camera is installed when humidity is very high, 
moisture may collect in the camera and cause the dome 
to become foggy. If the dome becomes foggy, remove 
it when the humidity is low and eliminate the moisture 
inside the camera, and then replace the dome. 
						

							10
Check before connection
Compatibility of devices are restricted. Before  
connections, check the ratings and dimensions of the 
devices to be used.
Contact your dealer for details.
Important hints to help with the installation
A self-cleaning function is activated (PAN/TILT/ ZOOM/
FOCUS) when this product is turned on.
Heat radiation 
The surface of this product radiates heat. Ventilation 
holes should be provided when installing the camera in 
an enclosed ceiling or con ned location where heat can 
build up. 
Ventilation holes
Screw tightening
 The screws and bolts must be tightened with an  
appropriate tightening torque according to the 
material and strength of the installation area.   
 Do not use an impact driver. Failure to observe  
this may cause overtightening and consequently 
damage to the screws.  
 When a screw is tightened, make the screw at a right  
angle to the surface. After tightening the screws or 
bolts, perform visual check to ensure tightening is 
enough and there is no backlash. 
When the screw is not needed, it should be removed  
and stored in an appropriate location.
Note:   
 
connecting the power plug. Likewise, the power 
plug should be unplugged before ending the 
grounding. 

camera will turn on automatically when the power 
cord is attached to the main lead. After starting, 
the self-cleaning function will be automatically 
activated, as will the pan, tilt, zoom and focus 
actions.