Home
>
Panasonic
>
Security Camera
>
Panasonic Color CCTV Camera Wv Cf614 Wv Cp600 Operating Instructions
Panasonic Color CCTV Camera Wv Cf614 Wv Cp600 Operating Instructions
Here you can view all the pages of manual Panasonic Color CCTV Camera Wv Cf614 Wv Cp600 Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
Configure the alarm output terminal setting
Select the operation of the alarm output terminal. Follow the procedure below.
“SYSTEM SETUP” screen
**SYSTEM SETUP** SYNC INT
ALARM IN/OUT
PRIVACY ZONE OFF
STABILIZER OFF
EL-ZOOM OFF
UPSIDE-DOWN OFF
LDC I...... 0
- +
RET TOP END
“ALARM IN/OUT” screen
**ALARM IN/OUT**
ALARM IN OFF
ALARM OUT OFF
RET TOP END
Step 1
Move the cursor to "ALARM IN/OUT" and press the [SET]...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-20.png "Page 21
21
Configure the alarm output terminal setting
Select the operation of the alarm output terminal. Follow the procedure below.
“SYSTEM SETUP” screen
**SYSTEM SETUP** SYNC INT
ALARM IN/OUT
PRIVACY ZONE OFF
STABILIZER OFF
EL-ZOOM OFF
UPSIDE-DOWN OFF
LDC I...... 0
- +
RET TOP END
“ALARM IN/OUT” screen
**ALARM IN/OUT**
ALARM IN OFF
ALARM OUT OFF
RET TOP END
Step 1
Move the cursor to \"ALARM IN/OUT\" and press the [SET]...")
21
Configure the alarm output terminal setting
Select the operation of the alarm output terminal. Follow the procedure below.
“SYSTEM SETUP” screen
**SYSTEM SETUP** SYNC INT
ALARM IN/OUT
PRIVACY ZONE OFF
STABILIZER OFF
EL-ZOOM OFF
UPSIDE-DOWN OFF
LDC I...... 0
- +
RET TOP END
“ALARM IN/OUT” screen
**ALARM IN/OUT**
ALARM IN OFF
ALARM OUT OFF
RET TOP END
Step 1
Move the cursor to "ALARM IN/OUT" and press the [SET]...
Page 22
![Page 22
22
Step 3
Move the cursor to “POSITION” and press the [SET] button.
Step 4
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the left upper position of the zone to be set and\
press the [SET]
button.
Step 5
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set an\
d press the [SET]
button.
→ An asterisk “*” will be displayed after the number and the zone s\
etting will be saved.
Step 6
When “ON (2)” is selected for “PRIVACY...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-21.png "Page 22
22
Step 3
Move the cursor to “POSITION” and press the [SET] button.
Step 4
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the left upper position of the zone to be set and\
press the [SET]
button.
Step 5
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set an\
d press the [SET]
button.
→ An asterisk “*” will be displayed after the number and the zone s\
etting will be saved.
Step 6
When “ON (2)” is selected for “PRIVACY...")
22 Step 3 Move the cursor to “POSITION” and press the [SET] button. Step 4 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the left upper position of the zone to be set and\ press the [SET] button. Step 5 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set an\ d press the [SET] button. → An asterisk “*” will be displayed after the number and the zone s\ etting will be saved. Step 6 When “ON (2)” is selected for “PRIVACY...
Page 23
![Page 23
23
Step 1
Move the cursor to “EL-ZOOM” and select “ON” and press the [SET] button.
→ The “EL-ZOOM” screen appears.
Step 2
Move the cursor to “ → PUSH SET” of “ZOOM” and press the [SET] button.
→ The zoom setting screen appears.
Step 3
Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET]
button.
Note:
• When the zoom factor is incremented, resolution will be deteriorated.
Step 4
Move the cursor to “ → PUSH SET”...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-22.png "Page 23
23
Step 1
Move the cursor to “EL-ZOOM” and select “ON” and press the [SET] button.
→ The “EL-ZOOM” screen appears.
Step 2
Move the cursor to “ → PUSH SET” of “ZOOM” and press the [SET] button.
→ The zoom setting screen appears.
Step 3
Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET]
button.
Note:
• When the zoom factor is incremented, resolution will be deteriorated.
Step 4
Move the cursor to “ → PUSH SET”...")
23 Step 1 Move the cursor to “EL-ZOOM” and select “ON” and press the [SET] button. → The “EL-ZOOM” screen appears. Step 2 Move the cursor to “ → PUSH SET” of “ZOOM” and press the [SET] button. → The zoom setting screen appears. Step 3 Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET] button. Note: • When the zoom factor is incremented, resolution will be deteriorated. Step 4 Move the cursor to “ → PUSH SET”...
Page 24
![Page 24
24
Back focus setting [BACK-FOCUS SETUP]
CF634
CF614
Selects the back focus setting type and performs fine adjustment. The \
following setting can be configured on the "BACK-
f OCUS
SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen.
The lens adjustment shall be performed before the back focus adjustment.
17. Auto back focus setting [ABF]
Move the cursor to " → PUS
h SET" of "AB f " and press the [SET] button.
→ The auto back focus...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-23.png "Page 24
24
Back focus setting [BACK-FOCUS SETUP]
CF634
CF614
Selects the back focus setting type and performs fine adjustment. The \
following setting can be configured on the \"BACK-
f OCUS
SETUP\" screen displayed from the top screen. Refer to page 5 for how to call up the screen.
The lens adjustment shall be performed before the back focus adjustment.
17. Auto back focus setting [ABF]
Move the cursor to \" → PUS
h SET\" of \"AB f \" and press the [SET] button.
→ The auto back focus...")
24 Back focus setting [BACK-FOCUS SETUP] CF634 CF614 Selects the back focus setting type and performs fine adjustment. The \ following setting can be configured on the "BACK- f OCUS SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen. The lens adjustment shall be performed before the back focus adjustment. 17. Auto back focus setting [ABF] Move the cursor to " → PUS h SET" of "AB f " and press the [SET] button. → The auto back focus...
Page 25
![Page 25
25
Special menu setting [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera \
image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
20. Chroma level adjustment [CHROMA GAIN]
Press the [RI gh T ] or [ LE f T ] button to adjust the color density of the camera image. When the level\...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-24.png "Page 25
25
Special menu setting [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera \
image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the \"SPECIAL SETUP\" screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
20. Chroma level adjustment [CHROMA GAIN]
Press the [RI gh T ] or [ LE f T ] button to adjust the color density of the camera image. When the level\...")
25 Special menu setting [SPECIAL SETUP] The special menu setup is performed including the setting of the camera \ image quality and the communication configuration when a receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen. 20. Chroma level adjustment [CHROMA GAIN] Press the [RI gh T ] or [ LE f T ] button to adjust the color density of the camera image. When the level\...
Page 26
![Page 26
26
**PIX OFF**
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
1
DEL 000 000
SPECIAL SETUP screen “PIX OFF” screenPixel compensation positioning scree n
RET TOP END
**SPECIAL SETUP**
CHROMA GAIN ...
.I..160
AP GAIN ..I.
... 20
PEDESTAL .I.
.
... 15
- +
PIX OFF DISPLAY ALARM
CAMERA RESET PUSH SET
SER.NO. XXXXXXXX COMMUNICATION COAX
RET TOP END
Step 1
Move the cursor to “PIX OFF” and press the [SET] button.
→ The...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-25.png "Page 26
26
**PIX OFF**
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
1
DEL 000 000
SPECIAL SETUP screen “PIX OFF” screenPixel compensation positioning scree n
RET TOP END
**SPECIAL SETUP**
CHROMA GAIN ...
.I..160
AP GAIN ..I.
... 20
PEDESTAL .I.
.
... 15
- +
PIX OFF DISPLAY ALARM
CAMERA RESET PUSH SET
SER.NO. XXXXXXXX COMMUNICATION COAX
RET TOP END
Step 1
Move the cursor to “PIX OFF” and press the [SET] button.
→ The...")
26
**PIX OFF**
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
1
DEL 000 000
SPECIAL SETUP screen “PIX OFF” screenPixel compensation positioning scree n
RET TOP END
**SPECIAL SETUP**
CHROMA GAIN ...
.I..160
AP GAIN ..I.
... 20
PEDESTAL .I.
.
... 15
- +
PIX OFF DISPLAY ALARM
CAMERA RESET PUSH SET
SER.NO. XXXXXXXX COMMUNICATION COAX
RET TOP END
Step 1
Move the cursor to “PIX OFF” and press the [SET] button.
→ The...
Page 27
![Page 27
27
Camera language selection [LANGUAGE SETUP]
A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE\
SETUP”
screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
Move the cursor to “LANGUAGE” and press the [RIGHT] or [LEFT] button to select the target language, then move the cursor to “SET”\
,
and press the [SET] button.
Select the target language from the following.
JAPANESE/ENGLISH...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-26.png "Page 27
27
Camera language selection [LANGUAGE SETUP]
A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE\
SETUP”
screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
Move the cursor to “LANGUAGE” and press the [RIGHT] or [LEFT] button to select the target language, then move the cursor to “SET”\
,
and press the [SET] button.
Select the target language from the following.
JAPANESE/ENGLISH...")
27 Camera language selection [LANGUAGE SETUP] A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE\ SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. Move the cursor to “LANGUAGE” and press the [RIGHT] or [LEFT] button to select the target language, then move the cursor to “SET”\ , and press the [SET] button. Select the target language from the following. JAPANESE/ENGLISH...
Page 28
![Page 28
28
Shortcut operation
Use of a system controller with the “Camera function” button allows users to perform th\
e shortcut settings with use of the numeric
keypad and camera function button. The available shortcut operations wit\
h this unit are shown as follows. System controller operation Setting contents
[9] + [0] + [Camera function] Black-and-white control (D&N) ON
CP620 CF634
[9] + [1] + [Camera function] Black-and-white control (
D&N) OFF
[9] + [2] + [Camera function] Black-and-white...](http://img.usermanuals.tech/thumb/58/72251/w300_wv-cf600_wv-cp600_oi_d-27.png "Page 28
28
Shortcut operation
Use of a system controller with the “Camera function” button allows users to perform th\
e shortcut settings with use of the numeric
keypad and camera function button. The available shortcut operations wit\
h this unit are shown as follows. System controller operation Setting contents
[9] + [0] + [Camera function] Black-and-white control (D&N) ON
CP620 CF634
[9] + [1] + [Camera function] Black-and-white control (
D&N) OFF
[9] + [2] + [Camera function] Black-and-white...")
28 Shortcut operation Use of a system controller with the “Camera function” button allows users to perform th\ e shortcut settings with use of the numeric keypad and camera function button. The available shortcut operations wit\ h this unit are shown as follows. System controller operation Setting contents [9] + [0] + [Camera function] Black-and-white control (D&N) ON CP620 CF634 [9] + [1] + [Camera function] Black-and-white control ( D&N) OFF [9] + [2] + [Camera function] Black-and-white...
Page 29
http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany © Panasonic System Networks Co., Ltd. 2012 sC0712-1092 PGQP1346YA Printed in China http://panasonic.net Importers name and address to follow EU rules: Panasonic T esting Centre Panasonic Marketing Eur ope GmbH Winsber gring 15, 22525 Hamburg F.R.Germany © Panasonic System Networks Co., Ltd. 2011 sC1111-0 PGZC1027ZA...