Home > Panasonic > Security Camera > Panasonic Color CCTV Camera Wv Cf344 Wv Cp300 Operating Instructions

Panasonic Color CCTV Camera Wv Cf344 Wv Cp300 Operating Instructions

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Color CCTV Camera Wv Cf344 Wv Cp300 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 27
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Before attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual. 
Operating Instructions
Color CCTV Camera 
Model No.  WV-CP300 Series
WV-CF344 Series
(Lens is optional for WV-CP300 Series.)
WV-CP300 WV-CF344
This manual covers the models: WV-CP300 Series (WV-CP310, WV-CP314, WV-\
CP300, WV-CP304) and WV-CF344 
Series (WV-CF354, WV-CF344).
    Add page 2 to Favourites
    image text
    Enable zoom 
    							2
Preface
About the user manuals
The operating instructions of the camera consist of 2 sets: these operat\
ing instructions (PDF) and Installation Guide.
This document explains how to configue the settings of the camera.
Refer to the installation guide for further information about how to ins\
tall the camera.
Adobe
® Reader® is required to read PDF. When the Adobe® Reader® is not installed on the PC, download the latest Adobe® Reader® 
from the Adobe web site and install it.
Trademarks and registered trademarks
Adobe, Acrobat Reader and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United \
States and/or other countries.
About notations
The following notations are used when describing the functions limited for specific models. 
The functions without the notations are supported by all models.
CP310
CP310
CP300
: The functions with this notation are available when using the model WV-CP310 and WV-CP314.
CP310
CP310
CP300: The functions with this notation are available when using the model WV-CP300 and WV-CP304.
CF354 : The functions with this notation are available when using the model WV-CF354.
CF344 : The functions with this notation are available when using the model WV-CF344.
    Add page 3 to Favourites
    image text
    Enable zoom 
    							
3

Contents
Preface  ........................................................................\
.......... 2
About the user manuals   .................................................... 2
Trademarks and registered trademarks ............................2
About notations
  ................................................................ 2
About the setup menus 
  ........................................................ 4
List of setup menu
  ............................................................ 4
Basic operation 
  ................................................................ 5
Screen transition diagram 

CP310
CP310
CP300

  ....................................... 6
Screen transition diagram 

CP310
CP310
CP300
  ....................................... 7
Screen transition diagram 
CF354 
  ....................................... 8
Screen transition diagram 
CF344 
 ....................................... 9
Camera title setting [CAMERA ID]
 
....................................... 10
Camera operation setting [CAMERA SETUP]
  ..................... 11
1. Register a scene file [SCENE1/SCENE2]
  .................... 11
2. Light quantity control method selection [ALC/ELC] 
  ..11
Back light compensation function
  .............................. 12
3. Electronic shutter setting [SHUTTER] 
  ........................ 13
4. Gain control setting [AGC] 
 
......................................... 13
5. Electronic sensitivity enhancement setting  
    [SENS UP]
 
................................................................... 13
6. White balance setting [WHITE BAL]  ...........................13
Manual fine adjustment of white balance 
  ..................14
7. Digital noise reduction function setting [DNR]
  ............15
8. Black-and-white mode setting [D&N (IR) ] 

CP310
CP310
CP300

  
    [D&N (ELE) ] 

CP310
CP310
CP300
 
CF354 
 
CF344 
 ................................... 15
9. VMD setting [VMD] 
 
..................................................... 16
Setting of motion detection
 
........................................ 17
Setting of scene change detection 
  ............................ 18
Camera system setting [SYSTEM SETUP] 
  ......................... 19
10. Synchronization method selection [SYNC]
  ...............19
11. Privacy zone setting [PRIVACY ZONE]
  ..................... 19
12. Image stabilizer setting [STABILIZER]
  ...................... 20
13. Electronic zoom setting [EL-ZOOM] 
  ........................ 20
14. Upside-down setting [UPSIDE-DOWN] 
  ................... 21
15. Lens distortion correction [LDC]
  ............................... 21
16. Focus setting [FOCUS]  

CF354 
  ................................... 21Special menu setting [SPECIAL SETUP]    ............................
23
17. Chroma level adjustment [CHROMA GAIN]    .............
23
18. Aperture level adjustment [AP GAIN]   ........................
23
19. Pedestal level adjustment [PEDESTAL]    ...................
23
20. Chroma phase (hue) adjustment [HUE]    ...................
23
21. Pixel compensation [PIX OFF]    .................................
23
22. Communication setting  
      [COMMUNICATION] 

CP310
CP310
CP300

 

CP310
CP310
CP300
    ............................. 24
23. Default resetting [CAMERA RESET]    ........................ 24
24. Serial number viewing [SER.NO.] 
  ............................ 24
Camera language selection [LANGUAGE SETUP]
  ..............25
Shortcut operation 
 
............................................................. 26
    Add page 4 to Favourites
    image text
    Enable zoom 
    							4
Setup itemDescription
CAMERA ID
 This item specifies the camera title. The camera title that indicates \
the camera location and other information 
about the camera is created with alphanumeric characters and symbol, and then displayed on the\
 screen. 
CAMERA Performs the camera operation settings. 
SCENE 1/
SCENE 2  Selects a scene file.  It is possible to register and save the settings as a scene file in case that it is neces\
sary 
to change the settings such when shooting at night. 
ALC/ELC Selects the method of controlling the quantity of light in accordance with the lens to be used. 
SHUTTER  Specifies the electronic shutter speed. 
AGC  Specifies gain adjustment. 
SENS UP  Specifies electronic sensitivity enhancement. 
WHITE BAL  Specifies white balance adjustment. 
DNR  Selects the level of the digital noise reduction function.
D&N (IR/ELE) Performs each setting regarding the black-and-white mode such as switching between color and black-\
and-
white images.
VMD Performs settings regarding VMD (Video Motion Detection)
SYSTEM
 Performs the settings regarding the camera system such as synchronization and privacy zone. 
SYNC  Specities the synchronization type. 
PRIVACY ZONE  Hides undesired portions in the camera shooting area. 
STABILIZER  Decides whether or not to enable the image stabilizer. 
EL-ZOOM  Switches the electronic zoom on and off. 
UPSIDE-DOWN Flips the camera images vertically or horizontally. 
LDC Adjusts the lens distortion correction to convert the image so that it matches the square monitor. 
FOCUS
CF354   Selects the adjustment method and fine adjustment method for focus. 
SPECIAL  
CHROMA GAIN Adjusts the chroma level (color density). 
AP GAIN Adjusts the aperture level. 
PEDESTAL  Adjusts the pedestal (brightness) level.  
HUE Adjust the chroma phase (hue).
PIX OFF  Corrects image defects such as flaws. 
COMMUNICATION
CP310
CP310
CP300
 
CP310
CP310
CP300Performs the communication setting of the system with a receiver into which this unit is integrated. 
CAMERA RESET  Restores the settings in the setup menu to the default settings.
SER.NO. Displays the serial number of this unit.  
LANGUAGE Selects a language to be used in the setup menu. 
About the setup menus 
Performing each setting item in the setup menu should be completed in ad\
vance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.
List of setup menu
    Add page 5 to Favourites
    image text
    Enable zoom 
    							5
Basic operation 
The operations in the setup menu are performed with the operation buttons after calling up the setup menu o\
n the connected video 
monitor.
The description below explains how to operate the setup menu basically. 
Screenshots of WV-CP310 are shown as an example. 
Screenshot 2
The setup mode changes to “ENABLE”, and the setup menu 
becomes ready to be set.Step 3
Move the cursor to the item to be set, and press the [SET] 
button.
Screenshot 1
Hold down the [SET] button for about 2 seconds to call up the 
top screen of the setup menu. Step 1
Press the [UP] or [DOWN] button to move the cursor to “END”. 
Step 2
Press the [RIGHT] button to move the cursor to “SETUP”, 
and press the [SET] button to change the setup mode from 
“DISABLE” to “ENABLE”. 
    
 MODEL   WV-CP310 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 END   SETUP DISABIE
 MODEL   WV-CP310 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 END   SETUP ENABLE
Screenshot 3
The selected setup screen in the setup menu appears on the 
screen. 
Note:
	 •	 If	the	top	screen	of	the	setup	menu	is	called	up	with	the	 operation buttons while the camera is operated, the setup 
mode is always “DISABLE” to prevent operation errors. 
    To perform settings in the setup menu, change the setup 
mode to “ENABLE”. 
	 •	 The	cursor	is	a	reversely	highlighted	part.	
   
Step 4
Perform the settings for each item.  •	 Selection	of	setting	item:	 Press the [UP] or [DOWN] button to move the cursor.
•	 Change	of	settings: Press the [RIGHT] or [LEFT] button. 
•	 Display	of	advanced	setup	screen:	 Press the [SET] button when “
” is attached to the target 
setting item. 
•	 Return	to	previous	setup	screen: Move the cursor to “RET” and press the [SET] button. 
•	 Return	to	the	top	screen:	 Move the cursor to “TOP” and press the [SET] button, to 
display the top screen of the setup menu. 
Step 5
Move the cursor to “END” and press the [SET] button to return 
to the camera image screen, or wait about 5 minutes and the 
setup menu will automatically close. 
    **CAMERA SETUP** 
SCENE1
 ALC/ELC    ALC    
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH      AUTO1
 VMD
 RET TOP END
D&N(IR)
OFF
    Add page 6 to Favourites
    image text
    Enable zoom 
    							6
Screen transition diagram CP310
CP310
CP300Top screen “CAMERA ID” screen
“CAMERA  SETUP” screen
“SYSTEM SETUP” screen
“SPECIAL  SETUP” screen
“LANGUAGE SETUP” screen 
 MODEL   WV-CP310 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI
    RET TOP END RESET
    ................
    **SYSTEM SETUP** 
SYNC          INT
PRIVACY ZONE  OFF
STABILIZER    OFF
EL-ZOOM       OFF
UPSIDE-DOWN   OFF
   -     +
LDC           I......  
0
HUE            ...I...  0
 RET TOP END
   **SPECIAL SETUP**
CHROMA GAIN   
...
.I..160
AP GAIN        ...I
... 32
PEDESTAL       .I.
.
... 15
              -     +
PIX OFF
CAMERA RESETPUSH SET
 SER.NO. XXXXXXXX COMMUNICATION COAX
 RET TOP END
    **CAMERA SETUP** 
SCENE1
 ALC/ELC    ALC     
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH      AUTO1
 VMD
 RET TOP END
D&N(IR) 
OFF
    Add page 7 to Favourites
    image text
    Enable zoom 
    							7
Screen transition diagram 
CP310
CP310
CP300
Top screen “CAMERA ID” screen
“CAMERA  SETUP” screen
“SYSTEM SETUP” screen
“SPECIAL  SETUP” screen
“LANGUAGE SETUP” screen 
 MODEL   WV-CP300 SERIES
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI
    RET TOP END RESET
    ................
    **SYSTEM SETUP** 
SYNC          INT
PRIVACY ZONE  OFF
STABILIZER    OFF
EL-ZOOM       OFF
UPSIDE-DOWN   OFF
   -     +
LDC           I......  
0
 RET TOP END
   **SPECIAL SETUP**
CHROMA GAIN    ...
.I..160
AP GAIN        ...I
... 32
PEDESTAL       .I.
.
... 15
PIX OFF
CAMERA RESET  PUSH SET
 SER.NO. XXXXXXXX COMMUNICATION COAX
 RET TOP END
    **CAMERA SETUP** 
SCENE1
 ALC/ELC    ALC     
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH      OFF
 VMD        OFF
 RET TOP END
D&N(ELE)
HUE            ...I...  0
              -     +
    Add page 8 to Favourites
    image text
    Enable zoom 
    							8
Screen transition diagram CF354 
Top screen “CAMERA ID” screen
“CAMERA  SETUP” screen
“SYSTEM SETUP” screen
“SPECIAL  SETUP” screen
“LANGUAGE SETUP” screen 
 MODEL   WV-CF354
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI
    RET TOP END RESET
    ................
    **SYSTEM SETUP** 
SYNC          INT
PRIVACY ZONE  OFF
STABILIZER    OFF
EL-ZOOM       OFF
UPSIDE-DOWN   OFF
   -     +
LDC           I......  
0
 RET TOP END
   **SPECIAL SETUP**
CHROMA GAIN    ...
.I..160
AP GAIN        ...I
... 32
PEDESTAL       .I.
.
... 15
PIX OFF
CAMERA RESET  PUSH SET
 SER.NO. XXXXXXXX
ABF  PUSHFOCUS
 RET TOP END
    **CAMERA SETUP** 
SCENE1
 ALC/ELC    ALC     
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH      OFF
 VMD        OFF
 RET TOP END
D&N(ELE)
HUE            ...I...  0
              -     +
    Add page 9 to Favourites
    image text
    Enable zoom 
    							9
Screen transition diagram CF344
Top screen “CAMERA ID” screen
“CAMERA  SETUP” screen
“SYSTEM SETUP” screen
“SPECIAL  SETUP” screen
“LANGUAGE SETUP” screen 
 MODEL   WV-CF344
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI
    RET TOP END RESET
    ................
    **SYSTEM SETUP** 
SYNC          INT
PRIVACY ZONE  OFF
STABILIZER    OFF
EL-ZOOM       OFF
UPSIDE-DOWN   OFF
   -     +
LDC           I......  
0
 RET TOP END
   **SPECIAL SETUP**
CHROMA GAIN    ...
.I..160
AP GAIN        ...I
... 32
PEDESTAL       .I.
.
... 15
PIX OFF
CAMERA RESET  PUSH SET
 SER.NO. XXXXXXXX
 RET TOP END
    **CAMERA SETUP** 
SCENE1
 ALC/ELC    ALC     
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH      OFF
 VMD        OFF
 RET TOP END
D&N(ELE)
HUE            ...I...  0
              -     +
    Add page 10 to Favourites
    image text
    Enable zoom 
    							10
Camera title setting [CAMERA ID]
This item specified the camera title. The camera title that indicates \
the camera location and other information about the camera is 
created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters.
Follow the procedure below to specify the camera title. Step 1
Select “ON” for “CAMERA ID”, and then press the [SET] button. 
→  The “CAMERA ID” screen appears. 
Important:
	 •	 When	“CAMERA	ID” is set to “OFF”, the camera title does not appear even after sett\
ing the camera title. 
Step 2
Move the cursor to the target item with use of the [UP], [DOWN], [RIGHT]\
, and [LEFT] buttons, and press the [SET ] button to enter 
the character. 
→  The entered characters are displayed in the editing area.

	 •	 To	revise	a	character,	move	the	arrow	(↑) in the editing area to a wrong character with use of the [RIGHT] or [LEFT] button, and 
enter a correct character. 
	 •	 To	enter	a	blank,	move	the	cursor	to	“SPACE” and press the [SET] button. 
	 •	 To	delete	all	the	entered	characters,	move	the	cursor	to	“RESET” and press the [SET] button. 
Step 3
Move the cursor to “POSI” and press the [SET] button after title entered. 
→ The display positioning screen appears.
Step 4
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to decide the title po\
sition and press the [SET] button. 
→  The title position is specified. 
   
FLOOR 1
Editing area
T
op screen “CAMERA 
ID” screen Display positioning screen
 MODEL   WV-CP310 SERIES
CAMERA ID     ON
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP ENABLE     **CAMERA ID**     
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +- */%$
    SPACE POSI
    RET TOP END RESET
    ................
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Color CCTV Camera Wv Cf344 Wv Cp300 Operating Instructions