Panasonic Color CCTV Camera Wv Cf344 Wv Cp300 Operating Instructions

11

Screen when SCENE1 is selectedScreen when SCENE2 is selected
    **CAMERA SETUP** 
SCENE1
 ALC/ELC    ALC    
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH
     AUTO1
 VMD         OFF
 RET TOP END
D&N(IR)     **CAMERA SETUP** 
SCENE2
COPY(SCENE1)  ALC/ELC    ALC    
 SHUTTER    OFF
 AGC        ON(HIGH)
 SENS UP    OFF
 WHITE BAL  ATW1
 DNR        HIGH
     AUTO1
 VMD         OFF
 RET TOP ENDD&N(IR)

Scene file  
number**ALC CONT**(1)
BACK LIGHT COMP 
“SYSTEM...

12

Back light compensation function
Follow the procedure below.Step 1
Set “ALC/ELC” to “ALC”, and press the [SET] button. 
→ The “ALC CONT” screen appears.
Note:
	 •	 When
	 “ALC/ELC” 	 is 	 set 	 to 	 “ELC” 	 or 	 “ALC+” 	 and 	 the 	 [SET ] 	 button 	 is 	 pressed, 	 the 	 “ELC 	 CONT” 	 or 	 “ALC+ 	 CONT” 	 screen 	 will 	 appear. 	
Step 2
Move
	 the 	 cursor 	 to 	 “BLC” 	 and 	 select 	 from 	 the 	 following 	 options. 	
ON: 	 Automatically 	 compensate 	 when 	 the 	 background 	 is 	 brighter...

13

Step 6
Hold down the [SET] button for more than 2 seconds after completion of masking.
→  Return to the previous menu.
Step 7
Move the cursor to “LEVEL” and press the [
R ig HT ] or [ LE f T ] button to adjust the level. 
3. Electronic shutter setting [SHUTTER] 
The variation in shutter speed allows users to perform the following.
• Increased shutter speed prevents blurring fast-moving subjects.
• If flicker is observed under fluorescent lighting of 50 Hz, selection of “1/100” for the speed can...

14
AWC: Activates the automatic white balance control mode. This adjustment is suitable for a location where a light source is stable. 
The adjustment of the color temperature ranges from 2000 K to 10000 K. When “AWC” is selected, the white balance needs 
to be adjusted.
Note: 
•		If	the	situation	meets	one	of	the	followings,	color	may	not	be	accurately	reproduced.	
	 •	 The	subject	is	mostly	highly-colored.	
	 •	 The	photographic	scene	is	under	the	bright	blue	sky	or	at	nightfall.	
	 •	 The	illumination...

15
Step 1
Set “WHITE BAL” to “ATW1”, “ATW2” or “AWC” and press the [SET] button. 
→  The fine adjustment screen appears. 
Step 2
Move the cursor to “R” and “B” and press the [LEFT] or [RIGHT] button to fine adjust the level for each. “R” stands for red and “B” 
stands for blue. 
When	the	level	indicator	moves	in	the	“+”	direction,	the	color	becomes	deeper,	and	when	the	level	indicator	moves	in	the	“–”	
direction, the color becomes lighter.
Step 3
Move the cursor to “AREA” and press the [SET] button to...

16

AUTO2: Used a near-infrared light source at night time.
ON: Displays black-and-white images.
OFF: Displays color images.

CP310
CP310
CP300
 AUTO: Similar to the basic functions of AUTO1, but does not change the IR fi\
lter. 

CF354 
 Switches to black-and-white images when the illuminance around the camera is lower than approx. 0.1 lx.

CF344
 OFF (default): Displays color images.
Note:
	 •	
CP310
CP310
CP300

 When “AUTO1” or “AUTO2” is selected, it is recommended to set “A g C” to “ON”.
	 •...

17

Important:
	 •	 The	 following 	 circumstances 	 may 	 result 	 in 	 detection 	 failure 	 or 	 false 	 detection. 	 Use 	 the 	 camera 	 after 	 adjusting 	 the 	 detection 	 area 	
and sensitivity. •
	 Not 	 enough 	 difference 	 in 	 brightness 	 between 	 the 	 background 	 and 	 the 	 moving 	 photographic 	 subject, 	 or 	 significant 	 changes 	 in 	
brightness
•
	 Dirt 	 or 	 water 	 drops 	 on 	 the 	 lens
•
	 Insufficient 	 brightness, 	 for 	 example, 	 when 	 shooting 	 at 	 night
•...

18
Step 3
Hold down the [SET] button for more than 2 seconds after completion of masking.
→  Return to the previous menu. 
Step 4
Move the cursor to “ALARM” and press the [LEFT ] and [RIGHT ] buttons to select “ON” or “OFF”.
ON: Outputs alarm signal when in display mode. Actions may be confirmed t\
hrough the motion detection mode when a moving  object is detected. 
OFF (default): Does not output alarm signal when in display mode. 
Step 5
Move the cursor to “DISPLAY MODE” and press the [SET] button. 
→...

19
Camera system setting [SYSTEM SETUP] 
Performs the settings relating to the camera system such as synchronization, and privacy zone. The following settings can be 
configured on the “SYSTEM SETUP” screen displayed from the top screen. 
Refer to page 5 for how to call up the screen. 
10. Synchronization method selection [SYNC]
This unit supports the following 2 types of synchronization methods, and one of the following is selected.
(1) Multiplexed vertical drive signal (VD2)
(2) Internal...

20
Step 4
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the left upper position of the zone to be set and\
 press the [SET] 
button.  Step 5
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set an\
d press the [SET] 
button. 
→  An asterisk “*” will be displayed after the number and the zone s\
etting will be saved. 
Step 6
When “ON (2)” is selected for “PRIVACY ZONE”, the mosaic level may be adjusted. The mosaic level may be \...