Home > Panasonic > Security Camera > Panasonic Color CCTV Camera Wv Cf344 Wv Cf354 Wv Cf374 Installation Guide

Panasonic Color CCTV Camera Wv Cf344 Wv Cf354 Wv Cf374 Installation Guide

Here you can view all the pages of manual Panasonic Color CCTV Camera Wv Cf344 Wv Cf354 Wv Cf374 Installation Guide. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.

Page 21

21
Important:
• When shooting in the following place or following subjects, press the [SET] button again to close the “FOCUS ADJUSTMENT” screen, or adjust to the best focus position while viewing 
the image. 
• Frequently moving subject 
• Subject with large illuminance change 
• Subject with low illuminance 
• Too bright or reflective subject 
• Subject through a window 
• Place where the lens easily becomes dirty 
• Subject with less contrast such as white wall 
• Subject with remarkable depth 
•...

Page 22

22
Attaching the dome cover
1 Align the mark with [|] on the dome cover, 
and then install the dome cover. 
2 Adjust the orientation of the dome cover.  
Turn the enclosure clockwise so that the 
mark aligns with [||]. 
Turn the dome cover to the left or right 
while viewing the monitor so that the light is 
not blocked. 
Important: 
•  Be sure to align the mark with [||] when 
adjusting the dome cover. Do not apply 
excessive force, or you may cause 
damage.
3  Turn the dome cover clockwise so that 
the...

Page 23

23
AF button
4  Fix the dome cover and camera body 
with the dome cover fixing screw (M3).
(Recommended torque: 0.59 N  · m) 
5  After finishing the installation, 
completely peel off the protection sheet 
that had been retained on the camera. 
6  Press the [AF ] button again to adjust 
the focus. 
CF354 
For more information, refer to page 21.
D om e c o ve r
f ixing  
scre w (M 3) 

Page 24

24
Setup menu
Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.
List of setup menu
Setup itemDescription
CAMERA ID
 This item specifies the camera title. The camera title that indicates th\
e camera 
location and other information about the camera is created with alphanumeric 
characters and symbol, and then displayed on the screen. 
CAMERA Performs the camera...

Page 25

25
Screenshot 2
The setup mode changes to "ENABLE", and 
the setup menu becomes ready to be set. Step 3
Move the cursor to the item to be set, and 
press the [SET ] button. 
Screenshot 1
Hold down the [SET] button for about 2 sec-
onds to call up the top screen of the setup 
menu. Step 1
Press the [UP] or [DOWN] button to move the 
cursor to "END".
Step 2
Press the [RIGHT] button to move the cursor 
to "SETUP", and press the [SET ] button to 
change the setup mode from...

Page 26

26
Screenshot 3
The selected setup screen in the setup menu 
appears on the screen. 
 
Note:	 •	 If	 the 	 top 	 screen 	 of 	 the 	 setup 	 menu 	 is 	
called up with the operation buttons, the 
setup
	 mode 	 is 	 always 	 "DISABLE" 	 to 	
prevent operation errors.
	 	 To
	 perform 	 settings 	 in 	 the 	 setup 	 menu, 	
change 	 the 	 setup 	 mode 	 to 	 "ENABLE". 	
	 •	 The
	 cursor 	 is 	 a 	 reversely 	 highlighted 	 part.
     
Step 4
Perform	 the 	 settings 	 for 	 each 	 item....

Page 27

27
Screen transition diagram CF374 
Top screenCAMERA ID screen
CAMERA  SETUP screen
SYSTEM SETUP screen
SPECIAL  SETUP screen
LANGUAGE SETUP screen 
 MODEL   WV-CF374
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI
    RET TOP END RESET
    ................
    **SYSTEM SETUP** 
PRIVACY ZONE  OFF...

Page 28

28
Top screenCAMERA ID screen
CAMERA  SETUP screen
SYSTEM SETUP screen
SPECIAL  SETUP screen
LANGUAGE SETUP screen 
 MODEL   WV-CF354
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI
    RET TOP END RESET
    ................
    **SYSTEM SETUP** 
PRIVACY ZONE  OFF SYNC          INT
STABILIZER...

Page 29

29
Screen transition diagram CF344
Top screen CAMERA ID screen
CAMERA SETUP screen
SYSTEM SETUP screen
SPECIAL SETUP screen
LANGUAGE SETUP screen 
 MODEL   WV-CF344
CAMERA ID     OFF
CAMERA   
SYSTEM
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
   **LANGUAGE SETUP**
LANGUAGE      ENGLISH
 SET
 RET TOP END
     **CAMERA ID**    
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-
*/%$
    SPACE POSI
    RET TOP END RESET
    ................
    **SYSTEM SETUP** 
PRIVACY ZONE  OFF...

Page 30

30
Blurred image
The temperature of power 
cord rises or falls when the 
power cord is bent or 
stretched during use 
Damaged power cord sheathing
Black line in image 
No image displayed
Cause/solutionReference page Symptom 
Troubleshooting 
Before asking for repairs, confirm the causes with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in th\
e 
table or a problem is not described below. 
–
–
20-21
–
9
–
–
15-16
18
	•	 Are 	 the...
Start reading Panasonic Color CCTV Camera Wv Cf344 Wv Cf354 Wv Cf374 Installation Guide

Related Manuals for Panasonic Color CCTV Camera Wv Cf344 Wv Cf354 Wv Cf374 Installation Guide

All Panasonic manuals