Home
>
Panasonic
>
Security Camera
>
Panasonic Color CCTV Camera Wv Cf314 Wv Cw324 Operating Instructions
Panasonic Color CCTV Camera Wv Cf314 Wv Cw324 Operating Instructions
Here you can view all the pages of manual Panasonic Color CCTV Camera Wv Cf314 Wv Cw324 Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
Camera system setting [SYSTEM SETUP]
Performs the settings relating to the camera system such as synchronization, alarm input/output terminal and privacy zone. The
following settings can be configured on the “SYSTEM SETUP” screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
10. Synchronization method [SYNC]
Only internal synchronization (INT) can be used.
Multiplexed vertical drive (VD2) synchronization cannot be used.
11. Privacy zone setting...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-20.png "Page 21
21
Camera system setting [SYSTEM SETUP]
Performs the settings relating to the camera system such as synchronization, alarm input/output terminal and privacy zone. The
following settings can be configured on the “SYSTEM SETUP” screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
10. Synchronization method [SYNC]
Only internal synchronization (INT) can be used.
Multiplexed vertical drive (VD2) synchronization cannot be used.
11. Privacy zone setting...")
21 Camera system setting [SYSTEM SETUP] Performs the settings relating to the camera system such as synchronization, alarm input/output terminal and privacy zone. The following settings can be configured on the “SYSTEM SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. 10. Synchronization method [SYNC] Only internal synchronization (INT) can be used. Multiplexed vertical drive (VD2) synchronization cannot be used. 11. Privacy zone setting...
Page 22
![Page 22
22
Step 5
Press the [UP], [DOWN ], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set and press the [SET]
button.
→ An asterisk “*” will be displayed after the number and the zone s\
etting will be saved.
Step 6
When “ON (2)” is selected for “PRIVACY ZONE”, the mosaic level may be adjusted. The mosaic level may be set through “ZONE
LEVEL”. (Range: 1 to 4)
Note:
• To delete a zone, select the zone number and press the [SET] button after...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-21.png "Page 22
22
Step 5
Press the [UP], [DOWN ], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set and press the [SET]
button.
→ An asterisk “*” will be displayed after the number and the zone s\
etting will be saved.
Step 6
When “ON (2)” is selected for “PRIVACY ZONE”, the mosaic level may be adjusted. The mosaic level may be set through “ZONE
LEVEL”. (Range: 1 to 4)
Note:
• To delete a zone, select the zone number and press the [SET] button after...")
22 Step 5 Press the [UP], [DOWN ], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set and press the [SET] button. → An asterisk “*” will be displayed after the number and the zone s\ etting will be saved. Step 6 When “ON (2)” is selected for “PRIVACY ZONE”, the mosaic level may be adjusted. The mosaic level may be set through “ZONE LEVEL”. (Range: 1 to 4) Note: • To delete a zone, select the zone number and press the [SET] button after...
Page 23
![Page 23
23
Step 2
Move the cursor to “ → PUSH SET” of “ZOOM” and press the [SET] button.
→ The zoom setting screen appears.
Step 3
Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET]
button.
Note:
• When the zoom factor is incremented, resolution will be deteriorated.
Step 4
Move the cursor to “ → PUSH SET” of “PAN/TILT” and press the [SET] button.
→ The pan/tilt setting screen appears.
Step 5
Press the [UP], [DOWN],...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-22.png "Page 23
23
Step 2
Move the cursor to “ → PUSH SET” of “ZOOM” and press the [SET] button.
→ The zoom setting screen appears.
Step 3
Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET]
button.
Note:
• When the zoom factor is incremented, resolution will be deteriorated.
Step 4
Move the cursor to “ → PUSH SET” of “PAN/TILT” and press the [SET] button.
→ The pan/tilt setting screen appears.
Step 5
Press the [UP], [DOWN],...")
23 Step 2 Move the cursor to “ → PUSH SET” of “ZOOM” and press the [SET] button. → The zoom setting screen appears. Step 3 Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET] button. Note: • When the zoom factor is incremented, resolution will be deteriorated. Step 4 Move the cursor to “ → PUSH SET” of “PAN/TILT” and press the [SET] button. → The pan/tilt setting screen appears. Step 5 Press the [UP], [DOWN],...
Page 24
![Page 24
24
Back focus setting [BACK-FOCUS SETUP] CW324L
CW314L
CW304L
CF314L
CF304L
CW324L
CW314L
CW304L
CF314L
CF304L
CW324L
CW314L
CW304L
CF314L
CF304L
Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the “BACK-FOCUS
SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen.
The lens adjustment shall be performed before the back focus adjustment.
16. Auto back focus setting [ABF]
Move the...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-23.png "Page 24
24
Back focus setting [BACK-FOCUS SETUP] CW324L
CW314L
CW304L
CF314L
CF304L
CW324L
CW314L
CW304L
CF314L
CF304L
CW324L
CW314L
CW304L
CF314L
CF304L
Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the “BACK-FOCUS
SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen.
The lens adjustment shall be performed before the back focus adjustment.
16. Auto back focus setting [ABF]
Move the...")
24 Back focus setting [BACK-FOCUS SETUP] CW324L CW314L CW304L CF314L CF304L CW324L CW314L CW304L CF314L CF304L CW324L CW314L CW304L CF314L CF304L Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the “BACK-FOCUS SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. The lens adjustment shall be performed before the back focus adjustment. 16. Auto back focus setting [ABF] Move the...
Page 25
![Page 25
25
Special menu setting [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the “SPECIAL SETUP” screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
19. Chroma level adjustment [CHROMA GAIN]
Press the [RIGHT] or [LEFT] button to adjust the color density of the camera image. When the level...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-24.png "Page 25
25
Special menu setting [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the “SPECIAL SETUP” screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
19. Chroma level adjustment [CHROMA GAIN]
Press the [RIGHT] or [LEFT] button to adjust the color density of the camera image. When the level...")
25 Special menu setting [SPECIAL SETUP] The special menu setup is performed including the setting of the camera image quality and the communication configuration when a receiver is used. The following settings are to be configured on the “SPECIAL SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. 19. Chroma level adjustment [CHROMA GAIN] Press the [RIGHT] or [LEFT] button to adjust the color density of the camera image. When the level...
Page 26
![Page 26
26
Step 1
Move the cursor to “PIX OFF” and press the [SET] button.
→ The “PIX OFF” screen appears.
Step 2
Select a number (1 to 16) with which a pixel compensation point is registered and press the [SET] button.
→ The pixel compensation positioning screen appears.
Step 3
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the crosshair cursor to the center of the flaw to be corrected and press
the [SET] button.
→ The flaw is corrected and the pixel compensation point is...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-25.png "Page 26
26
Step 1
Move the cursor to “PIX OFF” and press the [SET] button.
→ The “PIX OFF” screen appears.
Step 2
Select a number (1 to 16) with which a pixel compensation point is registered and press the [SET] button.
→ The pixel compensation positioning screen appears.
Step 3
Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the crosshair cursor to the center of the flaw to be corrected and press
the [SET] button.
→ The flaw is corrected and the pixel compensation point is...")
26 Step 1 Move the cursor to “PIX OFF” and press the [SET] button. → The “PIX OFF” screen appears. Step 2 Select a number (1 to 16) with which a pixel compensation point is registered and press the [SET] button. → The pixel compensation positioning screen appears. Step 3 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the crosshair cursor to the center of the flaw to be corrected and press the [SET] button. → The flaw is corrected and the pixel compensation point is...
Page 27
![Page 27
27
Camera language selection [LANGUAGE SETUP]
A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE SETUP”
screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
Move the cursor to “LANGUAGE” and press the [RIGHT] or [LEFT] button to select the target language, then move the cursor to “SET”,
and press the [SET] button.
Select the target language from the following.
JAPANESE/ENGLISH...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-26.png "Page 27
27
Camera language selection [LANGUAGE SETUP]
A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE SETUP”
screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
Move the cursor to “LANGUAGE” and press the [RIGHT] or [LEFT] button to select the target language, then move the cursor to “SET”,
and press the [SET] button.
Select the target language from the following.
JAPANESE/ENGLISH...")
27 Camera language selection [LANGUAGE SETUP] A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. Move the cursor to “LANGUAGE” and press the [RIGHT] or [LEFT] button to select the target language, then move the cursor to “SET”, and press the [SET] button. Select the target language from the following. JAPANESE/ENGLISH...
Page 28
![Page 28
28
Shortcut operation
Use of a system controller with the “Camera function” button allows users to perform the shortcut settings with use of the numeric
keypad and camera function button. The available shortcut operations wit\
h this unit are shown as follows.
System controller operationSetting contents
[9] + [0] + [Camera function] Black-and-white control (D&N) ON
[9] + [1] + [Camera function] Black-and-white control (D&N) OFF
[9] + [2] + [Camera function] Black-and-white...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-27.png "Page 28
28
Shortcut operation
Use of a system controller with the “Camera function” button allows users to perform the shortcut settings with use of the numeric
keypad and camera function button. The available shortcut operations wit\
h this unit are shown as follows.
System controller operationSetting contents
[9] + [0] + [Camera function] Black-and-white control (D&N) ON
[9] + [1] + [Camera function] Black-and-white control (D&N) OFF
[9] + [2] + [Camera function] Black-and-white...")
28 Shortcut operation Use of a system controller with the “Camera function” button allows users to perform the shortcut settings with use of the numeric keypad and camera function button. The available shortcut operations wit\ h this unit are shown as follows. System controller operationSetting contents [9] + [0] + [Camera function] Black-and-white control (D&N) ON [9] + [1] + [Camera function] Black-and-white control (D&N) OFF [9] + [2] + [Camera function] Black-and-white...
Page 29
http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany © Panasonic System Networks Co., Ltd. 2013 sL0313-0 PGQP1452ZA Printed in Chinahttp://panasonic.net Importers name and addr ess to follow EU rules: Panasonic T esting Centre Panasonic Marketing Eur ope GmbH Winsber gring 15, 22525 Hamburg F.R.Germany © Panasonic System Networks Co., Ltd. 2011 sC1111-0 PGZC1027ZA...