Home
>
Panasonic
>
Security Camera
>
Panasonic Color CCTV Camera Wv Cf314 Wv Cw324 Operating Instructions
Panasonic Color CCTV Camera Wv Cf314 Wv Cw324 Operating Instructions
Here you can view all the pages of manual Panasonic Color CCTV Camera Wv Cf314 Wv Cw324 Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11
Camera title setting [CAMERA ID]
This item specified the camera title. The camera title that indicates the camera location and other information about the camera is
created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters.
Follow the procedure below to specify the camera title. Step 1
Select “ON” for “CAMERA ID”, and then press the [SET] button.
→ The “CAMERA ID” screen appears.
Important:
• When “CAMERA ID”...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-10.png "Page 11
11
Camera title setting [CAMERA ID]
This item specified the camera title. The camera title that indicates the camera location and other information about the camera is
created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters.
Follow the procedure below to specify the camera title. Step 1
Select “ON” for “CAMERA ID”, and then press the [SET] button.
→ The “CAMERA ID” screen appears.
Important:
• When “CAMERA ID”...")
11 Camera title setting [CAMERA ID] This item specified the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters. Follow the procedure below to specify the camera title. Step 1 Select “ON” for “CAMERA ID”, and then press the [SET] button. → The “CAMERA ID” screen appears. Important: • When “CAMERA ID”...
Page 12
![Page 12
12
Screen when “SCENE1” is selectedScreen when “SCENE2” is selected
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH AUTO2
VMD OFF
RET TOP END
D&N(IR) **CAMERA SETUP**
SCENE2
COPY(SCENE1) ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH AUTO2
VMD OFF
RET TOP ENDD&N(IR)
Camera operation setting [CAMERA SETUP]
The following...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-11.png "Page 12
12
Screen when “SCENE1” is selectedScreen when “SCENE2” is selected
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH AUTO2
VMD OFF
RET TOP END
D&N(IR) **CAMERA SETUP**
SCENE2
COPY(SCENE1) ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH AUTO2
VMD OFF
RET TOP ENDD&N(IR)
Camera operation setting [CAMERA SETUP]
The following...")
12
Screen when “SCENE1” is selectedScreen when “SCENE2” is selected
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH AUTO2
VMD OFF
RET TOP END
D&N(IR) **CAMERA SETUP**
SCENE2
COPY(SCENE1) ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH AUTO2
VMD OFF
RET TOP ENDD&N(IR)
Camera operation setting [CAMERA SETUP]
The following...
Page 13
![Page 13
13
Follow the procedure below.
“ALC CONT” screenMask setting screen
“CAMERA SETUP” screen
**ALC CONT**(1)
BACK LIGHT COMP
OFF
MASK SET
- +
LEVEL .
I..... 0
RET TOP ENDBLC OFF
ABS
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO2
VMD OFF
RET TOP END
D&N(IR)
Step 1
Set “ALC/ELC” to “ALC”, and press the [SET] button.
→ The “ALC CONT” screen appears.
Note:
• CW324L
CW314L
CW304L...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-12.png "Page 13
13
Follow the procedure below.
“ALC CONT” screenMask setting screen
“CAMERA SETUP” screen
**ALC CONT**(1)
BACK LIGHT COMP
OFF
MASK SET
- +
LEVEL .
I..... 0
RET TOP ENDBLC OFF
ABS
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO2
VMD OFF
RET TOP END
D&N(IR)
Step 1
Set “ALC/ELC” to “ALC”, and press the [SET] button.
→ The “ALC CONT” screen appears.
Note:
• CW324L
CW314L
CW304L...")
13
Follow the procedure below.
“ALC CONT” screenMask setting screen
“CAMERA SETUP” screen
**ALC CONT**(1)
BACK LIGHT COMP
OFF
MASK SET
- +
LEVEL .
I..... 0
RET TOP ENDBLC OFF
ABS
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO2
VMD OFF
RET TOP END
D&N(IR)
Step 1
Set “ALC/ELC” to “ALC”, and press the [SET] button.
→ The “ALC CONT” screen appears.
Note:
• CW324L
CW314L
CW304L...
Page 14
![Page 14
14
Step 5
Press the [UP ], [DOWN], [RIGHT], and [LEFT] buttons to move the flashing cursor to the area to be masked and press the [SET]
button.
When the selected area is masked, the masked area will start blinking (between stripes and white). When the flashing \
cursor is moved
to other areas, the masked area will be displayed in white.
Repeat the above procedure to mask other areas as necessary.
Note:
• To cancel the masking, select the masked area to be canceled,...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-13.png "Page 14
14
Step 5
Press the [UP ], [DOWN], [RIGHT], and [LEFT] buttons to move the flashing cursor to the area to be masked and press the [SET]
button.
When the selected area is masked, the masked area will start blinking (between stripes and white). When the flashing \
cursor is moved
to other areas, the masked area will be displayed in white.
Repeat the above procedure to mask other areas as necessary.
Note:
• To cancel the masking, select the masked area to be canceled,...")
14 Step 5 Press the [UP ], [DOWN], [RIGHT], and [LEFT] buttons to move the flashing cursor to the area to be masked and press the [SET] button. When the selected area is masked, the masked area will start blinking (between stripes and white). When the flashing \ cursor is moved to other areas, the masked area will be displayed in white. Repeat the above procedure to mask other areas as necessary. Note: • To cancel the masking, select the masked area to be canceled,...
Page 15
15 Note: • CW324L CW314L CW304L CF314L CF304L CW324L CW314L CW304L CF314L CF304L CW324L CW314L CW304L CF314L CF304L When “ALC/ELC” is set to “ELC” or “ALC+”, only the AUTO mode is enabled. • CW324L CW314L CW304L CF314L CF304L CW324L CW314L CW304L CF314L CF304L CW324L CW314L CW304L CF314L CF304L When “SHUTTER” is set to options other than “OFF”, the electronic sensitivity enhancement setting cannot be performed and “---” appears. • When the magnification of “SENS UP” is increased,...
Page 16
16
Manual fine adjustment of white balance
The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature tracking
mode (ATW1, ATW2) or automatic white balance control mode (AWC).
Follow the procedures below.
**ATW1**(1)R
- +
B
- +
AREA
RET TOP END
**ATW1 AREA**(1)
POSITION PUSH SET
RET TOP END
Area setting screen
RESET
... I...
0
... I...
0
“CAMERA SETUP” screen Fine...
Page 17
17
AUTO2
**D&N(IR) **(1)
LEVELHIGHDURATION TIME
IR LED LIGHT FIX
S L
BURST(BW)ON
RET TOP END
.
I..
“CAMERA SETUP” screen “D&N (IR)” screen
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH AUTO2
VMD OFF
RET TOP END
D&N(IR)
Step 1
Move the cursor to “D&N (IR)” and select the mode from the following.
AUTO1: Automatically switches between color and...
Page 18
![Page 18
18
Step 5
Move the cursor to “BURST (BW)”, and decide whether or not to pr\
ovide a burst signal output in the black-and-white mode.
ON (default): Provides a burst signal output.
OFF: Does not provide any burst signal output.
Note:
• Images may not be displayed appropriately without burst signals when camera images are displayed in the black-and-white
mode depending on a monitor or VTR model to be used. In such a case, set\
the burst signal output to “ON”.
Step 6
When the “D&N...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-17.png "Page 18
18
Step 5
Move the cursor to “BURST (BW)”, and decide whether or not to pr\
ovide a burst signal output in the black-and-white mode.
ON (default): Provides a burst signal output.
OFF: Does not provide any burst signal output.
Note:
• Images may not be displayed appropriately without burst signals when camera images are displayed in the black-and-white
mode depending on a monitor or VTR model to be used. In such a case, set\
the burst signal output to “ON”.
Step 6
When the “D&N...")
18 Step 5 Move the cursor to “BURST (BW)”, and decide whether or not to pr\ ovide a burst signal output in the black-and-white mode. ON (default): Provides a burst signal output. OFF: Does not provide any burst signal output. Note: • Images may not be displayed appropriately without burst signals when camera images are displayed in the black-and-white mode depending on a monitor or VTR model to be used. In such a case, set\ the burst signal output to “ON”. Step 6 When the “D&N...
Page 19
![Page 19
19
“MOTION DET” screen
**MOTION DET**(1)
RET TOP ENDLEVEL
2S
OFF
DWELL TIME
DISPLAY MODE
ALARM
MASK SET
.... I..
20 - +
“CAMERA SETUP” screen
MOTION DET AUTO2
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
VMD
RET TOP END
D&N(IR)
Setting of motion detection
Move the cursor to “VMD”, press the [LEFT ] or [RIGHT ] button to select “MOTION DET”.
Step 1
Move the cursor to “MOTION...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-18.png "Page 19
19
“MOTION DET” screen
**MOTION DET**(1)
RET TOP ENDLEVEL
2S
OFF
DWELL TIME
DISPLAY MODE
ALARM
MASK SET
.... I..
20 - +
“CAMERA SETUP” screen
MOTION DET AUTO2
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
VMD
RET TOP END
D&N(IR)
Setting of motion detection
Move the cursor to “VMD”, press the [LEFT ] or [RIGHT ] button to select “MOTION DET”.
Step 1
Move the cursor to “MOTION...")
19
“MOTION DET” screen
**MOTION DET**(1)
RET TOP ENDLEVEL
2S
OFF
DWELL TIME
DISPLAY MODE
ALARM
MASK SET
.... I..
20 - +
“CAMERA SETUP” screen
MOTION DET AUTO2
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
VMD
RET TOP END
D&N(IR)
Setting of motion detection
Move the cursor to “VMD”, press the [LEFT ] or [RIGHT ] button to select “MOTION DET”.
Step 1
Move the cursor to “MOTION...
Page 20
![Page 20
20
Display mode screen“MOTION DET” screen
**MOTION DET**(1)
RET TOP ENDLEVEL
2S
OFF
DWELL TIME
DISPLAY MODE
ALARM
MASK SET
.... I..
20 - +
Step 6
Move the cursor to “LEVEL ” and press the [RIGHT] or [LEFT] button to adjust the level.
Repeat step 5 and 6 to adjust to optimal level.
Step 7
Move the cursor to “DWELL TIME ” and select the dwell time from the following. (unit: seconds)
2S (default)/5S /10S /30S
Alarm signal will be issued once a continuously moving object is...](http://img.usermanuals.tech/thumb/58/72249/w300_wv-cf314_wv-cw324_oi_d-19.png "Page 20
20
Display mode screen“MOTION DET” screen
**MOTION DET**(1)
RET TOP ENDLEVEL
2S
OFF
DWELL TIME
DISPLAY MODE
ALARM
MASK SET
.... I..
20 - +
Step 6
Move the cursor to “LEVEL ” and press the [RIGHT] or [LEFT] button to adjust the level.
Repeat step 5 and 6 to adjust to optimal level.
Step 7
Move the cursor to “DWELL TIME ” and select the dwell time from the following. (unit: seconds)
2S (default)/5S /10S /30S
Alarm signal will be issued once a continuously moving object is...")
20 Display mode screen“MOTION DET” screen **MOTION DET**(1) RET TOP ENDLEVEL 2S OFF DWELL TIME DISPLAY MODE ALARM MASK SET .... I.. 20 - + Step 6 Move the cursor to “LEVEL ” and press the [RIGHT] or [LEFT] button to adjust the level. Repeat step 5 and 6 to adjust to optimal level. Step 7 Move the cursor to “DWELL TIME ” and select the dwell time from the following. (unit: seconds) 2S (default)/5S /10S /30S Alarm signal will be issued once a continuously moving object is...