Panasonic Cf Vdw07crfm Owners Manual

31
The sensor used in the fingerprint scanner creates an image based on the
way in which the sensor comes in contact with the finger.  The image is
affected by the condition of the skin on the finger, and by the pressure
applied by the finger on the sensor.
At low temperatures, the finger tends to be dry, and the image comes out
very light, while at higher temperatures the finger tends to be moist, so
the image is darker.  Furthermore, if the finger is dry, it may take longer
to create the fingerprint...

32Place the finger properly on the sensor.
Correct finger placement
Align the center of the fingerprint with the center of the scanner, and
place the finger so as to cover the surface of the fingerprint scanner.
Incorrect finger placement
Adjust the finger to the correct position.
Only the fingertip is in contact with the scanner.
Finger position is too far forward.
Finger position is too far back.
Finger position is too far to the side.
How to Place the finger on the Sensor
Fingerprint Scanner           

33
No 016
Total 038
Capturing the Screen
Capture Button
If you want to later playback the currently displayed screen,
you can save the screen data onto the memory (up to 100
images)*
1.
*1The number of the data that can be saved is different according
to the image.
Press Capture button.
The currently displayed screen is saved, and is added at the
end of the already-saved images.
Displaying Saved Images
Menu Button
1Press Menu button.
2Select [General] - [OfflineView], then
select [OK].
The saved image...

34
No display after powering
on
An afterimage appears
“Connection timeout” is
displayed
“No server found” is
displayed
“Authentication failed” is
displayed
“Too many clients” is
displayed
“Window size not
supported” is displayed
Troubleshooting
Has the computer or wireless display been set to the
power-saving mode?
To resume operation of your computer from the
condition the power of the display is off (for energy
conservation purposes), touch the screen.
If an image is displayed for a prolonged period of...

35
“Illegal data received” or
“Initial image receiving
timeout” is displayed
“PC’s display mode
changed” is displayed
Software keyboard has
been closed
An afterimage appears
(i.e., green, red, and blue
dots remain on the
display) or there are dots
not displaying the correct
colors
Confirm whether the network is working properly or
not.
Confirm the AES key length setting by the following
procedure.

[start] - [All Programs] - [Panasonic] - [MeiWDS Setup
Utility]

Press the Menu button, select [Wireless],...

36
Model No.
LCD Type
Displayed Colors
Touchscreen
Card Standard
Swipe Speed
Resolution
Interface Wireless LAN
Battery Pack
Operating Time*1
Charging Time*1
AC Adaptor*2Input
Output
Power Consumption*3
Environment Operation
Storage
Physical Dimensions
 (W × H × D)
Weight
Specifications
CF-VDW07CRFM
8.4 Type (TFT)
256 colors (800 × 600 dots)
Anti-Reflection, Stylus (included) touch capable
ISO 7811
track 1, 2, 3
304.8 mm/s to 609.6 mm/s {12”/s to 24”/s}
300 × 300 pixel
500 DPI
IEEE802.11b
Li-ion 7.4 V,...