Panasonic Cf 52 Service Manual

9-18
9.2.6. Setting the SC RELAY PCB and HDD Hold Plate
1. Set the SC REALY PCB to the HDD Hold Plate, and fix it using two Screws . No.1, No.2
2. Fix the HDD Hold Plate to the MAIN HIGH PCB using the two Screws . No.3, No.4
3. Connect the FFC to the Connector(CN6503) and paste the Tape.
Screws  : DFHE5122YA
Screws  : DRHM0093ZA
 CN6503

SC RELAY PCBHDD hold plate
FFC
Tape
:No.2
:No.1 

9-19
9.2.7. Setting the Battery Connector Ass’y
1. Fix the Batt Con Holder to the FP C Batt using the two Screws . 
2. Fix the Batt Con Holder to the Batt  FPC Plate using the two Screws .
3. Fix the Batt FPC Plate to the computer using the two Screws . No.1, No.2
4. Connect the FPC Batt’s connector to the connector(CN1000), a nd fix the FPC Batt to the MAIN HIGH PCB using the two
Screws . No.1, No.2
Screw  : DFHE5122YA
Screw  : DRHM0093ZA
Screw  : DRHM0112ZA
Screw  : DRHM0115ZA
9.2.8. Setting the Hinge...

9-20
9.2.9. Setting the Hinge Cover R
1. Place the Cable through the rectangled hole of Hinge Support R and connect the Cable to the Connector (CN7).
2. Fix the Hinge Support R to the computer using the Screw .
Screw  : DRHM0093ZA
■ How to place the Cable

Tape
Hinge support R
Cover PC card
CN7 

9-21
9.2.10. Setting the KBD Earth Plate
1. Set the KBD Earth Plate to the computer.
2. Fix the KBD Earth Plate using the  four Screws . No.1 to No.4
3. Fix the KBD Earth Plate using the two Screws.
4. Paste the tape, and connect t he FPC to the Connector(CN34).
Screw  : DRHM0093ZA
Screw  : DXYN2+F12FNL
 :No.1
:No.4
KBD EARTH
PLATE
:No.2
:No.3
FFC
Tape
CN34 

9-22
9.2.11. Setting the PWR BATTERY LED PCB
1. Connect the Cabel to the Connector(CN4400), and insert it to the computer.
CN4400
Cable
PWR BATTERY
LED PCB
Bottom case assy 

9-23
9.2.12. Setting the AUDIO PCB
1. Connect the Cable to the Connector(CN3000).
2. Set the AUDIO PCB to the computer, and fix it using the two Screws . No.1, No.2
Screw  : DRHM0093ZA
■ Arranging the Cable and setting the WL button.
:No.1
AUDIO PCB
CN3000
Cable
:No.2 

9-24
9.2.13. Setting the WWAN PCB
1. Connect the FPC to the Connector(CN7002).
2. Set the WWAN PCB, and fix it using two Screws  and the Screw . No.1 to No.3
3. Connect the Cable(Gray) to JK7002 and Cable(Blue) to JK7004.
Screw  : DFHE5122YA
Screw  : DRHM5104ZAT
■ Arranging the Cables and Tapes
:No.2 :No.3
:No.1
WWAN PCB
CN7002
Cable
(Blue)
Cable
(Gray) 

9-25
9.2.14. Setting the SD PCB
1. Connect the FFC to the Connector(CN4300).
2. Set the SD PCB to the Top Cover, and fix it to using the two Screws . No.1, No.2
Screw  : DXSB2+4FNLT
9.2.15. Setting the Pad and TOUCH PAD PCB
1. Paste the Pad and set the TOUCH PAD PCB to the Top Cover.
2. Set the Pad Holder and Top Relay Plate, and fix  them using the six Screws . No.1 to No.6
Screw  : DXSB2+4FNLT

SD PCB
FFC 
CN4300
Top relay plate
Pad holder
TOUCH PAD
PCB
Pad :No.4
:No.5
:No.2
:No.3
:No.6
:No.1 

9-26
9.2.16. Setting the Top Cover
1. Connect the KBD FPC and FFC to the Connectors(CN22 and CN23), and place the Top Cover on the computer.
2. Fix the Top Cover using the five Screws . No.1 to No.5
3. Fix the Top Cover using the Screw .
4. Fix the BT UNIT PCB to the Top Cover using the Sc rew  and connect the Cable to the connector.
5. Fix the Top Cover using the Screw  , and paste the Tape and WP Sheet on it.
6. Fix the Cover BT to the Top Cover using the two Screws   No.1, No.2, and paste the Screw...

9-27
9.2.17. Setting the Keyboard
1. Connect the FPCs to the Connector on the KBD FPC.
2. Place the Keyboard Lid Plate on the Top Cover, and fix it using the four Screws . No.1 to No.4
3. Place the Keyboard on the Top Cover and paste the Tapes.
Screws  : DFHE5122YA
KBD FPC Connectors
Key board lid plate
:No.4
:No.1 :No.2
:No.3
FPC
Keyboard Tape
Tape