Panasonic Cd Stereo System Sc-pm41 Operating Instructions

11
RQT8038
NOTE on CDs
  This unit can access up to 99 tracks.
  Choose CD with this mark.
 
 This unit can play MP3  les and CD-DA format audio CD-R / RW 
that have been  nalized.
  It may not be able to play some CD-R / RW due to the condition of 
the recording.
  Do not use irregular shaped disc.
  Do not use disc with labels and stickers that are coming off or with 
adhesive exuding from under labels and stickers.
  Do not attach extra labels or stickers on the disc.
  Do not write anything...

12
RQT8038
Cassette tape – Play and record
Recording CDsRecording CDs
1Insert the cassette to be recorded on.
Insert inside the 
guides
Forward side
2Press [CD 6] and then [STOP 7, –DEMO].
3Press [0 OPEN/CLOSE] to insert the CD.
Press again to close.
4Press [PLAY MODE] to select your desired mode 
(refer page 7).
5Press [¶REC/8] to start recording.
Recording programmed tracksRecording programmed tracks
1Program the tracks you want (refer page 9).
2Press [¶REC/8] to start recording.
Other basic...

13
RQT8038

Numeric 
buttons
Radio – Tune
Memory presetMemory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER / BAND] to select “FM” or “AM”.
Automatic presettingAutomatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presettingManual presetting
1Press [PLAY MODE] to select “MANUAL”.
2Press [4/REW/4] or [3/FF/¢] to tune to the 
required station.
3Press [PROGRAM].
4Press numeric buttons to select a channel.
  The station occupying a channel is...

14
RQT8038
Setting the clockSetting the clock
This is a 12-hour clock.
1Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
2Within 7 seconds, press [4/REW/4] or 
[3/FF/¢] to set the time.
3Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds. 
  The clock may lose or gain some time over a period. Readjust if 
necessary.
Using the sleep timerUsing the sleep timer
This function enables...

15
RQT8038
Using the play or record timerUsing the play or record timer
You can set the timer to come on at a certain time to wake 
you up (play timer) or to record from the radio or an aux 
source (record timer).
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen to; 
tape, CD number (1~5), radio or AUX, and set the 
volume.
Record timer Check the cassette’s erasure prevention tabs 
(refer page 12), insert the cassette and tune to 
the radio station...

16
RQT8038
Sound adjustment
External unit
Connecting external unitConnecting external unit
Preparation
  Make sure that the power supply for all components has 
been turned off before making any connections.
  For details, refer to the operating instructions of the unit 
which is to be connected.
  All peripheral components and cables sold separately.
Connecting analog equipmentConnecting analog equipment
This example shows how to connect an analog player with a 
PHONO OUT/ LINE OUT switch.
When units...

17
RQT8038
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies 
indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 18 if you reside in the 
U.S.A., or refer to the “Product information” on page 19 if you reside in Canada.
Common problems
No sound.
Turn the volume up.
The speaker cords may not be connected properly. Turn the unit off, check and correct the...

18
RQT8038
Warranty (ONLY FOR U.S.A.)
Panasonic Audio Products
Limited Warranty
Panasonic Consumer Electronics Company, 
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5 
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workman-
ship, Panasonic Consumer Electronics Company or Panasonic Puerto...

19
RQT8038
Product Service
1. Damage requiring service —The unit should be serviced by 
quali ed service personnel if:
(a)  The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c)  The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked 
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that 
described in these operating...

Panasonic Consumer Electronics
Company, Division of Panasonic 
Corporation of North America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.comPanasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
© 2005 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia Panasonic Canada Inc.
5770 Ambler Drive 
Mississauga, Ontario,
L4W 2T3
www.panasonic.ca
RQT8038-3PL1204CP3035
En
Speci
 cations
AMPLIFIER SECTIONFTC Output Power...