Panasonic Cd Stereo System Sc-pm41 Operating Instructions

Operating Instructions
CD Stereo System
Model No. SC-PM41
RQT8038-3P
For U.S.A.
As an ENERGY STAR® Partner, Panasonic has 
determined that this product meets the ENERGY 
STAR
® guidelines for energy ef ciency.
Before connecting, operating or adjusting this product, please read 
these instructions completely. Please keep this manual for future 
reference.
Operations in these instructions are described mainly using 
remote control, but you can do the operations on the main unit if 
the controls are the...

2
RQT8038
Dear customerThank you for purchasing this product.
For optimum performance and safety, please read these 
instructions carefully.
These operating instructions are applicable to the following 
system.
System SC-PM41
Main unit SA-PM41
Speakers SB-PM41
The model number and serial number of this product can 
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep 
for future reference.
MODEL NUMBER 
SERIAL NUMBER 
User memo:
DATE OF PURCHASE...

3
RQT8038
IMPORTANT SAFETY INSTRUCTIONS
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance 
with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) 
that produce heat.
9)  Do not defeat the safety...

4
RQT8038

2,
()(
	
,/7

	


Red
Black
White
Blue
Grey (+) Blue (–)
Black (–) Red (+) To household 
AC outlet
2 Connect the FM indoor antenna.
Adhesive 
tape
FM indoor 
antenna
Tape the antenna to a wall or column, in a position with 
least amount of interference.
FM ANT
75
4 Connect the AC power supply cord.  The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
Getting started
3 Connect the speaker cords.
Ste pStep 1 1 -  M akin g t h e c o...

5
RQT8038
Step 2Step 2 - Inserting batteries into the remote control - Inserting batteries into the remote control




!!2,2
■ Batteries
  Insert so the poles (+ and –) match those in the remote control.
  Remove if the remote control is not going to be used for a long period of 
time. Store in a cool, dark place.
  Do not use rechargeable type batteries.
  Mishandling of batteries can cause electrolyte leakage which can damage 
items the  uid contacts and may cause a  re.
Do not:
  mix old...

6
RQT8038
Overview of controls
Main unitMain unit
Refer numbers in parentheses for page reference.
  Top of the unit
1 Standby/on switch (y/l POWER) (7, 14) Press to switch the unit from on to standby 
mode or vice versa. In standby mode, the unit 
is still consuming a small amount of power.
Remote control sensorHeadphone jack (PHONES) 
Avoid listening for prolonged 
periods of time to prevent 
hearing damage.
Plug type: 3.5 mm (1/8”) stereo 
(not included)
Cassette open (12)
Display panel
Album/menu...

7
RQT8038

Numeric 
buttons
CD trays
Playing a discPlaying a disc
1Press [y] to turn the unit on.
2Press [CD 1 ~ CD 5] to select your desired tray.
3Press [0 OPEN/CLOSE] to open the disc tray and 
then load the disc. Press [0 OPEN/CLOSE] again to 
close the tray.
Label must face upward
Disc trayTray 
number
4Press [CD 6] to start play.
5Adjust the volume.
Other basic operationsOther basic operations
To A c t i o n
stop the disc Press [CLEAR 7].
pause play Press [CD 6]. Press again to 
resume play.
skip...

8
RQT8038
CChecking which CDs are in the trayshecking which CDs are in the trays
(CD CHECK)(CD CHECK)  CD-DA MP3
1Press [CD CHECK].
2Press the button again to close the trays.
  The tray with a CD being played will not open.
  If the player is stopped, all trays will open.
  Do not remove or insert CDs during a CD check.
  Do not pull out the trays during a CD check.
  8 cm (3
3/20) CDs cannot be checked.
CD displayCD display
This function allows you to display the information 
on the current...

9
RQT8038
Entering charactersEntering characters
Press the numeric buttons repeatedly to select your 
desired character then press [3/FF/¢] to key in the 
next character.
  You can enter up to 32 characters.
  To edit, press [4/REW/4] or [3/FF/¢] to revised any 
characters.
  To delete, move the cursor over the character and then 
press [DEL].
Numbered 
buttonsCharacters Numbered 
buttonsCharacters
1 1 6 M N O 6
2 A B C 2 7 P Q R S 7
3 D E F 3 8 T U V 8
4 G H I 4 9 W X Y Z 9
5 J K L 5 0 0
h10
space !...

10
RQT8038
Finding your CD titles Finding your CD titles CD-DA MP3
This function allows you to display disc, album and 
track titles, then select to start play.
1Press [CD 6] and then [CLEAR 7].
2Press [PLAY LIST].
The CD selection screen appears.
3Press [5] or [∞] to select the disc title, then press 
[ENTER].
4MP3
Press [5] or [∞] to select the album, then press 
[ENTER].
Total tracks
CD-DA MP3
Press [5] or [∞] to select the track, then press 
[ENTER].
OR
To select play list using the main unit :...