Panasonic Cd Stereo System Sc-pm29 Operating Instructions

21
RQT7372
Making a recording
ARecording CDs
Preparations:l Insert the CD(s) you want to record. l Press [CD/q/ h] and then [g CLEAR].
1 Press [PLAY MODE] to select your desired mode. 
 Every time you press the button:   1 DISC  ALL DISC  1 TRACK  1 ALBUM (MP3/WMA)       A RANDOM (CD-DA)  1 RANDOM (CD-DA) 
1 DISC1-Disc modeALL DISCAll-Disc mode1 TRACK1-Track mode1 ALBUM1-Album mode (MP3/WMA only)1 DISC RANDOM1-Disc Random mode (CD-DA only)A DISC RANMOMAll-Disc Random mode (CD-DA only)
l If you selected 1...

22
RQT7372
Using the sound quality settings
By remote control only
APreset EQ and Manual EQ
You can choose one of four types of sound quality with Preset EQ or enhances the bass and treble effect of the sound with Manual EQ.
1 Press and hold [SOUND] to select "MANUAL EQ" or "PRESET EQ". 
 Each time you press and hold the button: MANUAL EQ  PRESET EQ
2  Press [SOUND] to select a setting. Each time you press the button: For "PRESET EQ" HEAVY   CLEAR   SOFT   VOCAL
       EQ-OFF...

23
RQT7372
AAuto-off function
When CD or tape is selected as the sourceTo save power, the unit turns off if it is left unused for 10 minutes.This function does not work if the source is tuner or AUX.
Press and hold [SLEEP, -AUTO OFF].
"AUTO OFF" is shown on the display.
To cancelP r e s s   a n d   h o l d   [ S L E E P ,   - A U T O   O F F ]   a g a i n   t o   c l e a r  "AUTO OFF" from the display.For your referenceThe setting is maintained even if the unit is turned off."AUTO...

24
RQT7372
Using the timers
By remote control only
Using the play/record timer
The timer has two functions. It can be set to on at a certain time to wake you up, or it can be set to record from the radio or from the aux source.The play timer cannot be used in combination with the record timer.Preparations:Turn the unit on and set the clock (è page 9).l For the play timer, prepare the music source you want to listen to; tape, CD, radio or aux, and set the volume.l For the record timer, insert the cassette...

25
RQT7372
Using the timers
By remote control only
AUsing the play/record timer
To check settingsWhile the unit is on and the “zPLAY” or “zREC” indicator is on, press [CLOCK/TIMER] so the incicator appears on the display.The settings are displayed in the following order:
For play timer For record timer1. Play start time1. Recording start time2. Play finish time2. Recording finish time3. Play source3. Recording source4. Playback volume
You can check the settings even when the system is OFF by pressing...

26
RQT7372
Specifications
g AMPLIFIER SECTIONRMS Power output10% Total harmonic distortion1 kHz, both channels driven(Low channel) 35 W per channel (6 Ω)8 kHz, both channels driven(High channel) 35 W per channel (6 Ω)Total Bi-Amp power 70 W per channelInput sensitivityAUX  250 mVInput ImpedanceAUX  11.8 kΩ
g FM TUNER SECTIONFrequency range 87.9 - 107.9 MHzSensitivity 1.8 µV (IHF)S/N 26 dB 1.5 µV Antenna terminal(s) 75 Ω (unbalanced)
g AM TUNER SECTIONFrequency range 530 - 1710 kHz  Sensitivity S/N 26 dB...

27
RQT7372
Warranty (U.S.A.) 

Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the "Customer Services Directory" on page 27 if you reside in the U.S.A, or refer to the "Product information" on page 26 if you reside in Canada.  
Common Problems
No sound.Turn the volume up.The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the...