Panasonic Cd Stereo System Sc-pm19, Sc-pm193 Operating Instructions

Recording operations
21
RQT7364
Before recording
• Only normal position tapes are recommended.
• Remove tabs to prevent recording. To record, cover tabs as shown.
• Volume and sound quality during playback have no effect on
recording.
To erase a recorded sound
1Press [TAPE 3] and then [STOP 7, –DEMO].
2Insert the recorded cassette with the tape facing out.
3Press [¶/8 REC].
Preparatory steps
Wind up the leader tape to begin recording immediately.
Preparation:Press [TAPE 3] and then [STOP 7, –DEMO] to...

Recording operations
22
RQT7364
ARecording CDs
1Press [CD 3/8] and then [STOP 7, –DEMO].
2Press [PLAY MODE] to select your desired mode.
For 1-TRACK mode
Press [
4 44 4
4/REW/4] or [
3 33 3
3/FF/¢] to select the track.
For 1-ALBUM mode (MP3)Press [ALBUM ( or )] to select the album.
For 1-DISC/1-RANDOM modeDo steps 1 to 3 on page 13.
Ensure CD is stopped.
3Press [¶/8 REC] to start recording.
To record programmed tracks
This function allows you to record up to 24 programmed tracks.
1Programme the track(s)...

Timers and others
23
RQT7364
Using the timers
Using the play/record timer
The timer can be set as an alarm or radio recorder. Play timer
and record timer cannot be used together.
Preparations:
Turn the unit on and set the clock (\ page 8).
Timer Action
Play timer Prepare the music source you want to listen
to; tape, CD, radio or aux, and set the volume.
Record timer Check the cassette’s erasure prevention tabs
(\ page 21), insert the cassette and tune to
the radio station (\ page 10) or select the aux...

Timers and others
24
RQT7364
Using the timers
To cancel the timer
Press [SHIFT] + [
˚ ˚˚ ˚
˚PLAY/REC] .
To change the settings when the unit is on
To change Action
play/record times Repeat steps 1, 2, 3, and 5 on previous
page.
source/volume1Press [SHIFT] + [
˚ ˚˚ ˚
˚PLAY/REC].
2Make changes to the source or vol-
ume.
3Do steps 4 to 5 on previous page.
A Using the play/record timer
To check the settings when the unit is on
Press [SHIFT] + [CLOCK/TIMER] until “
˚ ˚˚ ˚
˚PLAY” or “
˚ ˚˚ ˚
˚REC”
appears. Two...

Timers and others
25
RQT7364
AUsing the sound quality settings
You can select sound quality with Preset EQ and improve bass
and treble effect with Manual EQ.
Preset EQ
1Press and hold [SOUND] to select “PRESET EQ”.Each time you press and hold the button:
MANUAL EQ PRESET EQ
2Press [SOUND] to select:Each time you press the button:
Setting Sound quality
HEAVY Adds punch to rock
CLEAR Clarifies higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF Cancelled
Manual EQ
1Press and hold...

Reference
26
RQT7364
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 27 if you
reside in the U.S.A., or refer to the “Product information” on page 4 if you reside in Canada.
Reference pages are shown as black circled numbers.
Common Problems
No sound.
Sound is unfixed, reversed or
comes from one speaker...

Reference
27
RQT7364
Warranty (ONLY FOR U.S.A)
Panasonic Audio Products
Limited Warranty
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094Panasonic Sales Company, Division of Matsushita Electric
of Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or work-
manship,...

Reference
Specifications
AMPLIFIER SECTIONPower output
10% Total harmonic distortion
60
 Hz–3 kHz, both channels driven
(Low channel)SC-PM19  26
 W per channel (6 Ω)
SC-PM193  25
 W per channel (6 Ω)
3
 kHz–16 kHz, both channels driven
(High channel)SC-PM19  29
 W per channel (6 Ω)
SC-PM193  25
 W per channel (6 Ω)
Total Bi-Amp powerSC-PM19  55 W per channel
SC-PM193  50 W per channel
Power output
10% Total harmonic distortion
1
 kHz, both channels driven
(Low channel)SC-PM19  35
 W per channel (6 Ω)...