Panasonic Cd Stereo System Sc-akx14 Owners Manual

9
USBYou can connect and play MP3 tracks from your USB 
device.
Do not use a USB extension cable. The system cannot 
recognize USB device connected through a cable.1
Connect the USB device to the USB port.
Hold the main unit when connecting or disconnecting 
the USB device.
2
Press [USB] and then press [4/9 ] to start playback.
For other operation, refer to “Disc”.
Compatible USB devices which are defined as mass 
storage class:
• USB devices that support bulk-only transfer.
• USB devices that support...

10
Sound effectsClock and timers
Setting the clockThis is a 12-hour clock.1
Press [CLOCK/TIMER] to select “CLOCK”.
2
Within 10 seconds
, press [R, T ] to set the time.
3
Press [OK].
Press [CLOCK/TIMER] to show the clock for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Sleep timerThe sleep timer switches off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select “OFF”.
To show the remaining time
Press [SLEEP].
Note:
• The sleep timer can...

11
External equipmentYou can connect a VCR, DVD player etc. and listen to the 
audio through this system.
Preparation
• Disconnect the AC power supply cord.
• Switch off all equipment and read the appropriate operating instructions.1
Connect the external equipment.
2
Press [RADIO, EXT-IN] (main unit: [RADIO/EXT-IN]) 
to select “AUX”.
3
Play the external equipment.
Note:
• Components and cables are sold separately.
• If you want to connect equipment other than those  described, refer to the audio dealer....

12
“ERROR”
• An incorrect operation was done. Read the instructions and try again.
“NOT MP3/ERROR”
• An unsupported MP3 format. The system will skip that  track and play the next one.
“VBR–”
• The system cannot show the remaining play time for  variable bit rate (VBR) tracks.
“NORMAL”
• The “INPUT LEVEL” of AUX source automatically  changes from “HIGH” to “NORMAL” when the system 
detects distorted music sounds.
“NODEVICE”
• The USB device is not connected. Examine the  connection.Memory reset...

14
 ESPAŇOL Cómo realizar las conexiones1
Conecte las bocinas.
2
Conecte la antena de cuadro AM.Ponga la antena en posición vertical sobre su base 
hasta que haga clic.
3
Conecte la antena interior FM.Coloque la antena donde la recepción sea la mejor.
4
Conecte el cable de alimentación de CA.
Use exclusivamente el cable de alimentación de CA 
suministrado con este sistema.
No use un cable de alimentación de CA de otro equipo.
DiscoCómo reproducir disco1
Pulse [ x, OPEN/CLOSE] en la unidad principal para...

15
USBUsted puede conectar y reproducir pistas MP3 desde su 
dispositivo USB.
No use un cable de extension USB. El sistema no puede 
reconocer el dispositivo USB conectado a través de un 
cable.1
Conecte el dispositivo USB al puerto USB.
Sujete la unidad principal al conectar o desconectar el 
dispositivo USB.
2
Pulse [USB] y después pulse [ 4/9 ] para iniciar la 
reproducción.
Para otras operaciones, refiérase a “Disco”.Compatible con dispositivos USB definidos como tipo de 
almacenamiento masivo:•...