Home
>
Panasonic
>
Car Satellite Radio System
>
Panasonic Cd Player Weather Band Receiver Cq 5335u Operating Instructions
Panasonic Cd Player Weather Band Receiver Cq 5335u Operating Instructions
Have a look at the manual Panasonic Cd Player Weather Band Receiver Cq 5335u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CQ-5335U11 LOUD MUTE SCAN MODE BANDTUNE SEEK ILL PWRALMCLK CQ-5335U DISC CD SCAN RPT RDM APM DISP VOLSEL / SATPUSH BASS/TREB/BAL/FADER6 5 4 3 2 16 5 4 3 2 1 Tuning in a Weather Band Station • Press [BAND]to select WB (Weather Band). (apage 9) • Press any of the buttons [1]to[6]to monitor the preset station. Weather Band Stations National Weather Radio Broadcasts from over 380 Iocations throughout the U.S. on seven VHF/FM frequencies. Tune to weather band to receive continuous weather information 24 hours a day on one of the following frequencies. 1. 162.550 MHz 2. 162.400 MHz 3. 162.475 MHz 4. 162.425 MHz 5. 165.450 MHz 6. 162.500 MHz 7. 162.525 MHz Occasionally the frequency of an existing or planned station must be changed because of unexpected radio frequency interfere with adjacent NOAA weather Radio Stations and/or with other Government or commercial Operations within the area. If you have a question concerning NOAA Weather Radio, please contact your nearest National Weather Service Office.Note:The weather band (CH1-6) has been preset. CH7 is selected by pressing[}]or[{]. WB Weather Band Frequency (channel) Number
CQ-5335U12 CD Player Disc Insert and Playback Disc insert Playback will start automatically after the player recognized the loaded disc as an ordinary music CD. (When a CD-R or CD-RW which has CD-DA formatted data as the same as an ordinary music CD is loaded, this player recognizes it as an ordinary music CD.) “LOAd” will be displayed until the disc is loaded. Notes: •Do not insert a disc when “DISC” indicator lights. • The power will be turned on automatically when a disc is loading. Stop and Disc Eject Press[u](eject) to stop CD play and eject the disc. During disc ejection, “CD EJECT” will be displayed. Listening to a CD Press[MODE]to change to the CD player mode. Playback will start automatically when a disc is loaded. RadioCD player LOUD MUTE SCAN MODE BANDTUNE SEEK ILL PWRALMCLK CQ-5335U DISC CD SCAN RPT RDM APM DISP VOLSEL / SATPUSH BASS/TREB/BAL/FADER6 5 4 3 2 1 MODE C Q -53 3 5 U Label Side u(eject) ( When CD disc loaded )
CQ-5335U13 Cautions: •Only 5" (12 cm) CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit. • This unit does not support CD text display. •This unit does not support MP3 and WMA disc playback. • Refer to page 20 about notes on CD-Rs/RWs. • This unit is not designed for any 3" (8 cm) disc. • If you insert an 3" (8 cm) disc and can not eject it, turn ACC of your car off once and turn it on again, then press [u] (eject). • Do not use irregular shaped discs. • Do not use discs that have a seal or label attached. • Do not insert foreign matter into the disc slot. LOUDMUTE SCAN MODE BANDTUNE SEEK ILL PWRALMCLK CQ-5335U DISC CD SCAN RPT RDM APM DISP VOLSEL / SATPUSH BASS/TREB/BAL/FADER6 5 4 3 2 1SCANTUNE SEEK 6 5 4 3 2 1 Track Search Press and hold... [2TRACK]: Fast forward [1TRACK]: Fast reverse Release to resume the regular play. Track Selection Press[2TRACK]: Advance to the next track. Press[1TRACK]: Back to the beginning of the current track. Back to the previous track. (Press twice.) Repeat play • Press [5] (RPT). The current track is repeated. • Press [5] (RPT)again to cancel. Random play • Press [6] (RDM). All the tracks are played in random order. • Press [6] (RDM)again to cancel. Scan play • Press [4] (CD SCAN). The first 10 seconds of each track on the disc are played in sequence. • Press [4] (CD SCAN)again to cancel.
LOUD MUTE SCAN MODE BANDTUNE SEEK ILL PWRALMCLK CQ-5335U DISC CD SCAN RPT RDM APM DISP VOLSEL / SATPUSH BASS/TREB/BAL/FADER6 5 4 3 2 1 MODETUNE SEEK 2 1 CQ-5335U14 CD Changer Control qCD Changer mode While a disc magazine is inserted in the CD changer, press [MODE]to select CD changer mode. Play starts from the first track. wDisc Selection [1] ({DISC): Previous disc. [2] (}DISC): Next disc. eTrack Selection Press[TRACK2]once to go to the next track. Press repeatedly to step forward through all the tracks. Press[TRACK1]once to play from the beginning of the current track, Press twice to play the previous track. Press repeatedly to step backward through all the tracks. Track Search Press and hold [TRACK2]or[TRACK1]for more than 0.5 seconds to activate fast forward or reverse through a track. Release it to resume the normal CD play from that position.
CQ-5335U15 Note: CD changer functions are applicable to units with optional CD changer unit. (sold separately) Scan Play (Tracks) • Press [4] (CD SCAN). The track number blinks and the first 10 seconds of each track on the discs play in sequence. • Press[4] (CD SCAN)again to cancel and continue with the current track. Scan Play (Discs) • Press and hold [4] (CD SCAN)for more than 2 seconds. The first track of all the discs in the magazine is played for 10 seconds each and Disc Number blinks. • Press and hold [4] (CD SCAN)for more than 2 seconds again to cancel. Repeat Play (Tracks)• Press [5] (RPT)to repeat the current track. • Press [5] (RPT)again to cancel. blinks blinks lights REP: Repeat lndicator Repeat Play (Discs)• Press and hold [5] (RPT)for more than 2 seconds to repeat the current disc. • Press and hold [5] (RPT)for more than 2 seconds again to cancel.blinks REP: Repeat lndicator Random Play (Tracks)• Press [6] (RDM)to random selection. Music is played from all available CDs. • Press [6] (RDM)again to cancel.lights R: Random Indicator Random Play (Discs) • Press and hold [6] (RDM)for more than 2 seconds all the available tracks on the current disc play in a random sequence. • Press and hold [6] (RDM)for more than 2 seconds again to cancelblinks R: Random Indicator ❐Remote Control CA-RC500U(option)
CQ-5335U16 Troubleshooting Preliminary Steps Check and take steps as described in the tables below. If You Suspect Something Wrong Immediately switch the power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do so. No power. Trouble Vehicle’s ignition switch is not on. aTurn your vehicle’s ignition switch to ACC or ON. Cables are not correctly connected. aConnect cables correctly. Power connector is not correctly connected. aConnect the power connector to the terminal that is always active. Power connector is not correctly connected. aConnect the power connector to your vehicle’s ACC source. Grounding wire is not correctly connected. aConnect the grounding wire to a metal part of the vehicle. Mute is set to ON. aSet it to OFF. Cables are not correctly connected. aConnect cables correctly. The ground lead is not connected properly. aConnect the ground lead properly. Cautions: • Do not use the unit if it malfunctions or if there is something wrong. • Do not use the unit in irregular condition, for example, without sound, or with smoke or foul smell, which can cause ignition or electric shock. Immediately stop using it and call the store where you purchased it. Cause/Step Troubleshooting Tips ❐Common No sound. Noise.
CQ-5335U17 Troubleshooting(Continued) Much noise in FM stereo and monaural broad- casts. Trouble Station is too far, or signals are too weak. aSelect other stations of higher signal level. The radio antenna is not extended enough. aExtend fully the radio antenna. Preset station is reset.Battery cable is not correctly connected. aConnect the battery cable to the terminal that is always active. Cause/Step ❐Radio Disc is in the CD compartment but no sound is made, or disc is ejected automatically. Trouble Disc is upside down. aPlace disc in the correct direction with the label side up. Sound skips, bad sound quality. (e.g. caused by noise) • Disc is dirty. • Disc has scratches. aClean disc, referring to the section on “Notes on Discs”. aThe unit may not successfully playback a CD-R/RW that is made in combination of writing software, a CD recorder (CD-R/RW drive) and a disc which are incompatible one another. Refer to instructions for the concerned devices for details. • Disc is dirty. • Disc has scratches. aClean disc, referring to the section on “Notes on Discs”. A disc that has data other than CD-DA type is loaded. aDiscs that have CD-DA type data should be used. aThe unit may not successfully playback a CD-R/RW that is made in combination of writing software, a CD recorder (CD-R/RW drive) and a disc which are incompatible one another. Refer to instructions for the concerned devices for details. Cause/Step ❐CD
CQ-5335U18 No sound from left, right, front, or rear speaker. Trouble Left and right balance, or front and rear balance is off on one side. aAdjust BAL/FAD as appropriate. Left and right sounds are reversed in stereo listening.The right speaker wire is connected to the left speaker and the left speaker wire to the right speaker. aConnect the speaker wires to the correct ones. Cables are not correctly connected. aConnect the cables correctly. Cause/Step ❐Sound Setting Sound skips due to vibration. Disc is not ejected. Time is counted but no sound comes out. Trouble Mounting angle is over 30˚. aAdjust mounting angle to less than 30˚. Instable mounting. aMount the unit securely with the mounting parts, referring to the section on installation. • Disc is defective. • Mechanical trouble. aPress [u] (eject). If normal operation is not restored, call the store where you purchased the unit or the nearest Service center to ask for repairs. The first track of a mix mode disc was reproduced. (Mix mode is a format in which data except music is recorded on the first track and music data is recorded on other than the first track in a session.) aPlayback music data recorded on other than the first track. Cause/Step ❐CD (Continued)
CQ-5335U19 Error Display Messages ❐ CD Disc is dirty, or is upside down. ➡Select the next available compact disc. Check the disc. Disc has scratches. ➡Select the next available compact disc. Check the disc. No operation by some cause. ➡Eject the magazine. If failure persists, press the reset switch on the CD changer. If normal operation is not restored yet, call the store where you purchased the unit to the nearest panasonic service center to ask for repairs. No disc in the changer (magazine) ➡Insert discs into the changer (magazine). Disc is dirty, or is upside down. A disc that has data other than CD-DA type is loaded. ➡Check the disc. Disc has scratches. ➡Check the disc. No operation by some cause. ➡If normal operation is not restored, call the store where you purchased the unit or the nearest Service center to ask for repairs. TroubleCause/Step ❐ CD changer Troubleshooting(Continued)
CQ-5335U20 Care of the Unit Notes on Discs Notes on CD-Rs/RWs ❐Cleaning this Unit Use a dry, soft cloth to wipe. ❐Caution on Cleaning Never use solvents such as benzine, thinner as they may mar the surface of the unit. Do not play any ordinary music CDs with labels other than this one. How to hold the disc • Do not touch the underside of the disc. • Do not scratch the discs. • Do not bend disc. • When not in use, keep the disc in the case. Do not use irregular shaped discs. • Transparency discs maybe can not be played back Do not leave discs on the following places: • Direct sunlight • Near car heaters • Dirty, dusty and damp areas • Seats and dashboards Disc cleaning Use a dry, soft cloth to wipe from the center outward. Do not attach any seals or labels to your discs. Do not write on the disc label in a heavy pen or ballpoint pen stroke. • You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface. • CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them inside a vehicle for extended periods may damage them and make playback impossible. • The unit may not successfully play back a CD-R/RW that was made by the combination of writing software, a CD recorder (CD-R/RW drive) and a disc if they are incompatible one another. • This player cannot play the CD-R/RW discs if the session is not closed. • This player cannot play the CD-R/RW discs which contains other than CD-DA data. • Be sure to observe the instructions of CD-R/RW disc for handling it. Label side Do not use irregular shaped discs. Maintenance