Panasonic Cd Player Weather Band Receiver Cq 5335u Operating Instructions

							Operating InstructionsLOUDMUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLKCQ-5335U
DISC CD SCAN RPT RDMAPM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1
Heavy Duty CD player/weather Band Receiver with  CD changer Control
CQ-5335U
• Please read these instructions carefully before using this product and keep this manual for future reference.  
						

							CQ-5335U2
Safety Information
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPLIANCE TO RAIN,
SPLASHING, DRIPPING OR MOISTURE.
The following applies only in the U.S.A.
Part 15 of the FCC Rules
FCC Warning:
Any unauthorized changes or modifications to this
equipment would void the user's authority to operate
this device.
NOTICE:
This product contains lead in some components.
Disposal of these materials may be regulated in your
community due to environmental considerations. 
For disposal or recycling information please contact
your local authorities, or the Electronics Industries
Alliance: 
CAUTION:
PLEASE FOLLOW THE LAWS AND REGULATIONS
OF YOUR STATE, PROVINCE OR COUNTRY FOR
INSTALLATION OF THE UNIT.
Find the model number and serial number on either the back or bottom of the unit. Please record them in the space
below and retain this booklet as a permanent record of your purchase to help with identification in case of theft.
MODEL NUMBERCQ-5335USERIAL NUMBER
DATE PURCHASED FROM
Laser Products:
Wave length: 780 nm
Laser power: No hazardous radiation is emitted with
safety protection.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS. 
						

							CQ-5335U3
We welcomes you to our ever growing family of electronic product owners. We know that this product will
bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering,
manufactured with carefully selected components and assembled by people who take pride in their work. Once
you discover the quality, reliability, and value we have built into this product, you too will be proud to be a
member of our family.
❐Use this product safely
When Driving
Keep the volume level low enough to be aware of
road and traffic conditions.
When Washing Your Car
Do not expose the product, including the speakers
and CDs, to water or excessive moisture. This could
cause electrical shorts, fire, or other damage.
When Parked
Parking in direct sunlight can produce very high
temperatures inside your car. Give the interior a
chance to cool down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate with a 12 V DC,
negative ground battery system.
Disc Mechanism
Do not insert coins or any small objects. Keep
screwdrivers and other metallic objects away from
the disc mechanism and disc.
Use Authorized Service centers
Do not attempt to disassemble or adjust this
precision product. Please refer to the Service center
list included with this product for service assistance.
For Installation
The product should be installed in a horizontal
position with the front end up at a convenient angle,
but not more than 30˚.
Accessories1. Operating Instructions ..................................................................................................1
2. Supplied Hardware.............................................................................1 set (➡ page 23)
3. Warranty Card ...............................................................................................................1 
						

							CQ-5335U4
Contents
Safety Information(Part 15 of the FCC Rules) . . . . . . . . . . . . . . . . . Page 2
Use this product safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
❒Power and Sound Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Power, volume, mute, loudness, Illumination switching, audio mode
(Bass/Treble/Balance/Fader)
❒Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Initial time, time reseting
❒Alarm Time Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Initial alarm time, alarm time setting and reset, alarm operation,
alarm output volume selection
❒Radio  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radio mode, band, manual tuning, seek tuning, preset station setting,
preset station calling, Weather Band Stations
❒CD Player  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disc insert and playback, stop and disc eject, listening to a CD,
track selection, track search, repeat play, random play, scan play
❒CD changer control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CD Changer mode, Disc Selection, Track Selection, Track Search, scan
play, repeat play, random play
Note:CD changer controls are applicable to units with optional CD changer
unit (sold separately)
❒Remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Note:Remote controls are available to an optional Remote control unit
CA-RC500U (sold separately)
❒Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting tips, Error Display Messages
❒Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Care of the unit, notes on discs, notes on CD-Rs/RWs
❒Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❒Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installation hardware, overview, required tools dashboard specifications,
preparation, to remove the unit
❒Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cautions, wiring diagram
❒Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
FM 
						

							CQ-5335U5
LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5335U
DISC CD SCAN RPTRDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 21
Volume level (0 to 40)
(default:18)
Power
Turn the key in the ignition until the
accessory indicator lights.
Power on:Press[PWR](power).
Power off:Press[PWR](power) again.
ACC
ON
Volume
Turn the knob clockwise to increase volume,
and counterclockwise to decrease volume.
Mute
Press[MUTE]to mute the sound completely.
Loudness
Press and hold [MUTE] (LOUD)for more
than 2 seconds to enhance bass and treble
tones when listening at low or medium
volume.
Press and hold [MUTE] (LOUD)for more
than 2 seconds again to deactivate when
listening at higher volumes.
Up
Down
Press[MUTE]again to cancel.
Power and Sound Controls
Remote Control Signal Sensor
Point the remote control unit 
(CA-RC 500U, option) toward 
the unit's sensor. 
						

							CQ-5335U6
LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5335U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1
Power and Sound Controls (Continued)
Audio Modes 
(Bass/Treble/Balance/Fader)
Push[SEL]to select the audio mode.
FaderBalance
TrebleBass Volume
Audio Mode
Note:If no operation takes place for more than 5
seconds in audio mode (2 seconds in
volume mode), the display returns to the
regular mode.
push
w q
Illumination Switching
Press[SCAN] (ILL)for more than 2 seconds
to switch the illumination color (green/amber).
Tu r n  [VOL](volume) clockwise or
counterclockwise to change each level.
Bass:
Adjustable range: –12 to +12 dB (by 3 dB step)
Balance center
(default) R (right speaker) or L (left speaker)default : 0 dB
Treble:
Adjustable range: –12 to +12 dB (by 3 dB step)default : 0 dB
Balance:
Adjustable range:
1 to 15 (by 1 step)
Fader center
(default) F (front speaker) or R (rear speaker)
Fader:
Adjustable range:
1 to 15 (by 1 step) 
						

							CQ-5335U7
LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5335U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1
TUNE
SEEK
CLK
Clock Setting
The 12-hour system is used for the clock.
Initial Time
“SET” is displayed when the clock is not adjusted.
Selecting the Clock Display
Press[CLK](clock) to switch clock and alarm time
display both.
Note:if no operation takes place for more than 5
seconds in alarm time, the display returns to the
clock display.
[{TUNE],[}TUNE]
(Hours, Minutes)
Time Setting
Time Reset
When you want to reset the time, repeat steps qto
r.
Note:the current time will be displayed at all the
time even the power of the radio is turned off. qPress and hold [CLK](clock) and do not release
to set time. Display blinks and the time setting
mode is activated.
wPress[{]to set the hour.
ePress[}]to set the minute.
rOnce the time has been set, release [CLK].
Note:Press and hold [{]or[}]to change
numbers rapidly.(blink.)
(Hours set.)
(Minutes set.)
(End.)
clock display Alarm time display
Hours
Minutes 
						

							CQ-5335U8
Alarm Time Setting
LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5335U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1
The 12-hour system is used for the clock.
Initial Alarm Time
Press and hold [ALM](Alarm)
“AM 12:00” is displayed when the alarm is not adjusted.
Alarm Time Setting
Hours
Minutes
Alarm Time Reset
When you want to reset the alarm time, repeat
stepsqtor.
Alarm Operation
• Alarm is switched to ON or OFF each time [ALM]is pressed.
• When the alarm is switched to ON, the alarm will sound at the set
alarm time.
Turning off the Alarm Sound
The alarm will turn off automatically after 90 seconds. Otherwise,
press[ALM]once.
Alarm output Volume Selection
You can select ALARM VOL 1 (or VOL 2) by pressing [ALM]in
sequence and the display will show as follows. qPress and hold [ALM](Alarm) and do not
release to set alarm time. Display blinks and
the alarm time setting mode is activated.
wPress[{]to set the hour.
ePress[}]to set the minute.
rOnce the alarm time has been set, release [ALM].
Note:Press and hold [{]or[}]to change
numbers rapidly.(blink.)
(Hours set.)
(Minutes set.)
Cautions:
• Be careful not to set wrong alarm time, otherwise, the alarm
may sound while driving.
• If the alarm is set, be sure to check the set alarm time by
pressing[CLK].
• If volume is set at “0” level, the output volume will be muted.
(Even when ALARM is acting.)
aaOFF
[{TUNE],[}TUNE]
(Hours, Minutes) 
						

							CQ-5335U9
Radio
LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5335U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1
TUNE
SEEKSCAN
MODE
BAND
Radio Mode
Press[MODE]to change to the radio mode.
Band
Press[BAND]to change the band.
Seek Tuning
Press and hold for more than 0.5 seconds and release it.
[}TUNE]: Higher frequency
[{TUNE]: Lower frequency
Tuning will automatically stop when the next broadcast
station is received.FM stereo indicator
w
Manual Tuning
[}TUNE]: Higher frequency
[{TUNE]: Lower frequency
rScan
• Press [SCAN], each station will be scanned sequentially and the display
will blink for 5 seconds.
• Press [SCAN]again to stop scanning and the last station will continue to
broadcast.
e q
( When a CD changer is connected)( When CD disc loaded)
RadioaCD PlayerCD Changer Control
ca 
						

							LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5335U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1BAND6 5 4 3 2 1
CQ-5335U10
Radio(Continued)
Preset buttons from [1]to[6]
Preset Station Setting
Up to 6 stations can be saved in each of the FM1, FM2
and AM preset station memories.
Note:Existing saved stations are overwritten with new
stations after following this procedure.
Caution:To ensure safety, never attempt to preset stations
while you are driving.blinks once
Band
Press[BAND]to select a desired band. 
(➡page 9)
Auto Preset Memory (APM)
Press and hold [BAND](APM: auto preset memory) for more
than 2 seconds.
• The 6 stations with good reception will be automatically
saved in the memory under preset buttons from [1]to[6].
• Once set, the preset stations are sequentially scanned for 5
seconds each.
• Press [BAND]again to stop sequentially scan.
Manual Preset Memory
qUse manual or seek tuning to find a station. (➡page 9)
wPress and hold one of the preset buttons from [1]to[6]
until the display blinks once.
Preset Station Calling
Press the corresponding preset button from [1]
to[6]to tune in a preset station.
q
w