Panasonic Cd Player Receiver Cq C1200u Operating Instructions

9E
N
G
L
I
S
H
10E
N
G
L
I
S
H
21 20
CQ-C1200U/C1120U/C1110U/C1100U
CQ-C1200U/C1120U/C1110U/C1100U
Preliminary StepsCheck and take steps as described in the tables below.If You Suspect Something WrongImmediately switch the power off.
Disconnect the power connector and check that there is nei-
ther smoke nor heat from the unit before asking for repairs.
Never try to repair the unit by yourself because it is dangerous
to do so.No power.
Trouble
Car’s ignition switch is not on.
➡Turn your car’s ignition...

11E
N
G
L
I
S
H
12E
N
G
L
I
S
H
23 22
CQ-C1200U/C1120U/C1110U/C1100U
CQ-C1200U/C1120U/C1110U/C1100U
•Disc is defective.
•Mechanical trouble.
➡Press [u] (eject). If normal operation is not restored, call the store
where you purchased the unit or the nearest Servicenter to ask for
repairs.
Disc is not ejected.❐CD (Continued)
The first track of a mix mode disc was reproduced. (Mix mode is a for-
mat in which data except music is recorded on the first track and music
data is recorded on other than the first...

13E
N
G
L
I
S
H
14E
N
G
L
I
S
H
25 24
CQ-C1200U/C1120U/C1110U/C1100U
CQ-C1200U/C1120U/C1110U/C1100U
❐Cleaning this UnitUse a dry, soft cloth to wipe.
❐Caution on CleaningNever use solvents such as benzine, thinner as they
may mar the surface of the unit.
Label side
 
Do not use irregularly shaped discs. How to hold the disc
•Do not touch the underside of the disc.
•Do not scratch the discs.
•Do not bend disc.
•When not in use, keep the disc in the case.
Do not use irregularly shaped discs.
Do not leave...

15E
N
G
L
I
S
H
16E
N
G
L
I
S
H
27 26
CQ-C1200U/C1120U/C1110U/C1100U
CQ-C1200U/C1120U/C1110U/C1100U
Caution: Connect the red power lead last, after
you have made and insulated all other connec-
tions.
Installation
(Continued)
❐Identify All LeadsThe first step in installation is to identify all the car wires
you’ll use when hooking up your sound system.
As you identify each wire, we suggest that you label it
using masking tape and a permanent marker. This will
help avoid confusion when making connections...

❐Preparation•Disconnect the cable from the negative       battery 
terminal (see warning and caution below).
•Remove Mounting Collar qand Trim Plate ufrom the
main unit temporarily, which are already mounted at
shipment.*
•Unit should be installed in a horizontal position with the
front end up at a convenient angle, but not more than 30°.❐Dashboard InstallationInstallation OpeningThis unit can be installed in any dashboard having
an opening as shown below. The dashboard should
be 3 ⁄ 1 6  (4.75 mm)–7 ⁄32...

(+) (–) (+)(–) (+)(–) (+) (–)FRONT SP
REAR SP
ACCBATTERY 15A
1
3
2
SW-OUT
19E
N
G
L
I
S
H
20E
N
G
L
I
S
H
31 30
CQ-C1200U/C1120U/C1110U/C1100U
CQ-C1200U/C1120U/C1110U/C1100U
Electrical ConnectionsCautions:
•This product is designed to operate with a 12 V DC, negative ground battery system.
•To prevent damage to the unit, be sure to follow the connection diagram below.
•Strip about 5 mm of the lead ends for connection.
•Do not insert the power connector into the unit until the wiring is completed.
•Be...

21E
N
G
L
I
S
H
22E
N
G
L
I
S
H
33 32
CQ-C1200U/C1120U/C1110U/C1100U
CQ-C1200U/C1120U/C1110U/C1100U
❐GeneralPower supply: 12 V DC (11 V–16 V), test voltage 14.4 V, negative ground
Current consumption: Less than 2.2 A (CD play mode; 0.5 W×4 channels)
Maximum power output: 50 W×4 channels at 1 kHz, volume control maximum (CQ-C1200U/C1120U)
45 W×4 channels at 1 kHz, volume control maximum (CQ-C1110U/C1100U)
Tone adjustment range:
Bass: ±12 dB at 100 Hz
Treble: ±12 dB at 10 kHz
Suitable speaker impedance:...