Home
>
Panasonic
>
Camera Accessories
>
Panasonic Camera Controller Ak Hrp900p Operating Instructions
Panasonic Camera Controller Ak Hrp900p Operating Instructions
Have a look at the manual Panasonic Camera Controller Ak Hrp900p Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
6
5Menu operation switch [MENU]
Operation switch for camera menu.
Item selection or data change can be done by turning this switch. When this switch
pushed, the item and data are settled.
6Menu ON switch [MENU ON]
Used to turn the camera menu ON/OFF.
7Preset memory switch [MEMO]
Preset memory can be done up to 5 points with respect to lens zoom, focus, and iris
position (when iris select switch Kis at [MANU]). When using the preset memory, first
set the lens focus, zoom, and iris. Next, push this...](http://img.usermanuals.tech/thumb/58/68206/w64_ak-hrp900p_en_om_d-5.png "Page 6
6
5Menu operation switch [MENU]
Operation switch for camera menu.
Item selection or data change can be done by turning this switch. When this switch
pushed, the item and data are settled.
6Menu ON switch [MENU ON]
Used to turn the camera menu ON/OFF.
7Preset memory switch [MEMO]
Preset memory can be done up to 5 points with respect to lens zoom, focus, and iris
position (when iris select switch Kis at [MANU]). When using the preset memory, first
set the lens focus, zoom, and iris. Next, push this...")
![Page 7
7
Controls and their Functions
=Alarm indication LED [ALARM]
It lights up when an alarm is generated (in case of fan stop, wrong communication
speed, etc.).
Note:
In case of wrong communication speed, change the DIP SW position in the unit to
match the camera and communication speed so that the alarm goes out.
>Scene file select switch [SCENE]
Used to select the scene file previously set on the camera.
Note:
With [PRESET] selected, it results in the factory-adjusted setting.
?Mode select switch [MODE]...](http://img.usermanuals.tech/thumb/58/68206/w64_ak-hrp900p_en_om_d-6.png "Page 7
7
Controls and their Functions
=Alarm indication LED [ALARM]
It lights up when an alarm is generated (in case of fan stop, wrong communication
speed, etc.).
Note:
In case of wrong communication speed, change the DIP SW position in the unit to
match the camera and communication speed so that the alarm goes out.
>Scene file select switch [SCENE]
Used to select the scene file previously set on the camera.
Note:
With [PRESET] selected, it results in the factory-adjusted setting.
?Mode select switch [MODE]...")
![Page 8
8
FGain select switch [GAIN]
Used to select the master gain of the camera. It changes in the order of 0dB)9dB
)18dB)S1 (Super gain 1))S2)3dB )0dB.
Note:
For super gain setting, check with the camera menu.
GShutter select switch [SHUTTER OFF/STEP/SYNCHRO]
Used to select the electronic shutter of STEP and SYNCHRO set on the camera.
Note:
For electronic shutter setting, check with the camera menu.
HIndication change switch [CHECK]
Used to change the indication item.
IIndicator
It indicates the F value of...](http://img.usermanuals.tech/thumb/58/68206/w64_ak-hrp900p_en_om_d-7.png "Page 8
8
FGain select switch [GAIN]
Used to select the master gain of the camera. It changes in the order of 0dB)9dB
)18dB)S1 (Super gain 1))S2)3dB )0dB.
Note:
For super gain setting, check with the camera menu.
GShutter select switch [SHUTTER OFF/STEP/SYNCHRO]
Used to select the electronic shutter of STEP and SYNCHRO set on the camera.
Note:
For electronic shutter setting, check with the camera menu.
HIndication change switch [CHECK]
Used to change the indication item.
IIndicator
It indicates the F value of...")
![Page 10
10
RBreaker [BREAKER]
DC power breaker. The breaker operates to cut off the power in case of over-current.
SDC12V input connector [DC12V IN] (XLR4-pin)
Connects the AC adapter. We recommend that the AW-PS505P (option) is used.
1
234
Controls and their Functions
Pin No
1
2, 3
4
Signal
GND
–––
12V](http://img.usermanuals.tech/thumb/58/68206/w64_ak-hrp900p_en_om_d-9.png "Page 10
10
RBreaker [BREAKER]
DC power breaker. The breaker operates to cut off the power in case of over-current.
SDC12V input connector [DC12V IN] (XLR4-pin)
Connects the AC adapter. We recommend that the AW-PS505P (option) is used.
1
234
Controls and their Functions
Pin No
1
2, 3
4
Signal
GND
–––
12V")
![Page 11
11
ZOOM
REVERSEFOCUS
REVERSENOR REV NOR REV
TU
_Front panel
TZoom operation lever direction change switch [ZOOM REVERSE]
Used to change the direction of the zoom operation lever.
With this switch set at [NOR], when the zoom operation lever :is shifted to [TELE], the
zoom operates in a telescopic mode, and when shifted to [WIDE], zooming is made in a
wide angle mode.
With this switch set to [REV], it can be operated in the opposite direction. Also, with this
switch set to [REV], the operating direction...](http://img.usermanuals.tech/thumb/58/68206/w64_ak-hrp900p_en_om_d-10.png "Page 11
11
ZOOM
REVERSEFOCUS
REVERSENOR REV NOR REV
TU
_Front panel
TZoom operation lever direction change switch [ZOOM REVERSE]
Used to change the direction of the zoom operation lever.
With this switch set at [NOR], when the zoom operation lever :is shifted to [TELE], the
zoom operates in a telescopic mode, and when shifted to [WIDE], zooming is made in a
wide angle mode.
With this switch set to [REV], it can be operated in the opposite direction. Also, with this
switch set to [REV], the operating direction...")
11 ZOOM REVERSEFOCUS REVERSENOR REV NOR REV TU _Front panel TZoom operation lever direction change switch [ZOOM REVERSE] Used to change the direction of the zoom operation lever. With this switch set at [NOR], when the zoom operation lever :is shifted to [TELE], the zoom operates in a telescopic mode, and when shifted to [WIDE], zooming is made in a wide angle mode. With this switch set to [REV], it can be operated in the opposite direction. Also, with this switch set to [REV], the operating direction does not match the indication on the panel. In that case, use the attached seal for proper indication. UFocus adjust direction change switch [FOCUS REVERSE] Used to change the direction of the focus adjust lever. With this switch at [NOR], when the focus adjust lever ;is shifted to [FAR], the focus is adjusted to a far distance, and when shifted to [NEAR], the focus is adjusted to a near distance. With this switch set to [REV], focusing can be made in the opposite direction. Also, with this switch set to [REV], the operating direction does not match the indication on the panel. In that case, use the attached seal for proper indication. Controls and their Functions
12 Make the connection with power supply to the unit turned off. ≥Use AW-PS505P (option) as the AC adapter for control panel. ≥Use a swivel stand, AW-PH300A, AW-PH500, AW-PH600, and an adapter suited for the swivel stand. ≥When no swivel stand is used, connect both of the motor-driven zoom lens iris control cable and remote (zoom/focus) cable to the camera. (see page 13) ≥When a swivel stand is used, connect the iris control cable to the camera, and the remote (zoom/focus) cable to the swivel stand. (see the illustration below) ≥For the connection system of each unit, refer to pages 14 to 16. BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F G/L I N Pb OUT Pr / SDI OUTY/ VIDEO OUT 1394CONTROL IN IP/RPDC12V IN CAMERA I/F LENSE I/F ND/EXT SDI IN CSOP How to Connect To iris connector Iris control cable Remote (zoom/focus control) cable To lens interface connector≥Connect the motor-driven zoom lens iris control cable to the camera, and the remote (zoom/focus control) cable to the swivel stand. If the motor-driven zoom lens remote (zoom/focus control) cable is connected to the camera, the lens cannot be controlled.
13 _Lens connection in the case of no swivel stand _How to mount the lens ≥A lens of any maker’s can be used provided that it is a bayonet type (B4 mount) lens of 2/3 inch standard.* 1Turn the lens fixing ring knob counterclockwise and remove the lens mount cap. 2Mount the lens and completely secure it by turning the lens fixing ring knob clockwise. 3Connect the iris control cable to the lens connector. 4Connect the remote (zoom/focus control) cable to the zoom/focus connector on the rear panel. *Note that some lenses are uncontrollable with respect to zoom and focus function. How to Connect BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F720PROGRESSIVEIris control cable (to lens connector)Remote (zoom/focus control) cable (Connect the cable to the swivel stand when used.) Lens fixing ring knob
14 O I BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F POWERON OFFSD CARDOPERATE ALARMSCENE MODEPRE CAM BAR TESTUSER1 USER2Camera Controller TA L LY MENU ON MENU SPEED ZOOMTELE WIDEFA R NEARFOCUS12345PRESETCC FLTER3200CROSS6300 4300ND FLTER11/321/16 1/4SHUTTER OFFSYNCROSTEPGAIN0S1 S2 S39dB 18dB AUTO WHITE BLACKGAINBLACK AUTO M-PEDIRISCHECK Multi-cable (17ft) AK-HDMLTCA05 Camera controller AK-HRP900P D-SUB 15-pin D-SUB 15-pinHD monitor AC adapter AW-PS505P Ext. sync signal (3-value SYNC) DC power cable Coaxial cable (5C-FB) HD-SDI Remote control spec. lensRemote (zoom/focus control) cable Multi-purpose digital camera control system configuration 1 Multi-purpose digital camera AK-HC900P
15 Multi-purpose digital camera control system configuration 2 O I BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F G/L I N Pb OUT Pr / SDI OUTY/ VIDEO OUT 1394CONTROL IN IP/RPDC12V IN CAMERA I/F LENSE I/F ND/EXT SDI IN CSOP O I POWERON OFFSD CARDOPERATE ALARMSCENE MODEPRE CAM BAR TESTUSER1 USER2Camera Controller TALLY MENU ON MENU SPEED ZOOMTELE WIDEFA R NEARFOCUS12345PRESETCC FLTER3200CROSS6300 4300ND FLTER11/321/16 1/4SHUTTER OFFSYNCROSTEPGAIN0S1 S2 S39dB 18dB AUTO WHITE BLACKGAINBLACK AUTO M-PEDIRISCHECK Swivel stand AW-PH300A Multi-purpose digital camera AK-HC900PMulti-cable (17ft) AK-HDMLTCA05 Camera controller AK-HRP900PHD monitor AC adapter AW-PS505P Ext. sync signal (3-value SYNC) DC power cable Coaxial cable (5C-FB) HD-SDI Remote (zoom/focus control) cable AC adapter AW-PS301 AC adapter AW-PS505P Swivel stand controllerAW-RP301 Swivel stand control is possible for AW- PH500/PH600 as well. Remote control spec. lens Remote (zoom/focus control) cable
16 Multi-purpose digital camera control system configuration 3 O I BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F G/L I N Pb OUT Pr / SDI OUTY/ VIDEO OUT 1394CONTROL IN IP/RPDC12V IN CAMERA I/F LENSE I/F ND/EXT SDI IN CSOP O I O I POWERON OFFSD CARDOPERATE ALARMSCENE MODEPRE CAM BAR TESTUSER1 USER2Camera Controller TA L LY MENU ON MENU SPEED ZOOMTELE WIDEFA R NEARFOCUS12345PRESETCC FLTER3200CROSS6300 4300ND FLTER11/321/16 1/4SHUTTER OFFSYNCROSTEPGAIN0S1 S2 S39dB 18dB AUTO WHITE BLACKGAINBLACK AUTO M-PEDIRISCHECK Swivel stand AW-PH300A Multi-purpose digital camera AK-HC900P Multi-cable (17ft) AK-HDMLTCA05 Camera controller AK-HRP900PHD monitor AC adapter AW-PS505P DC power cable Coaxial cable (5C-FB) HD-SDI Remote (zoom/focus control) cable AC adapter AW-PS301 AC adapter AW-PS505P Swivel stand controllerAW-RP301 Swivel stand control is possible for AW- PH500/PH600 as well. AC adapter AW-PS300Multi-cable (1.7ft) AK-HDMLTCA05 Interface adapter AK-HTF900P Trans- mission Remote control spec. lens
17 The communication speed is factory-adjusted to 38.4Kpbs. In case it does not match the communication speed of multi-purpose camera AK-HC900P, the alarm LED is lighted. Remove the rear panel and change the DIP SW on the board and adjust it to the communication speed of the camera. SW3 ON 1234 ON 1234 ON 1234 ON 1234 5678 Change the communication report by the combination of SW3 No.1 and No.2 on ROP CPU board.125Kbit/Sec 38.4Kbit/Sec 9600Kbit/Sec SW5 SW4 SW3 Remove the screw and open the bottom plate, then DIP SW can be seen in there. Communication Speed Setting
18 _How to rack-mount Install the main body on the rack as shown below. Remove the rack mount bracket screw when installing Rack mount bracket Attached screwCoupler Coupler fitting holes Example of Rack Mount
CAMERA I / F MONITOR OUT G/L IN TALLY IN BREAKERDC 12V IN YPbPr P/T CONT CAMERA I / F MONITOR OUT G/L IN TALLY IN BREAKERDC 12V IN YPbPr P/T CONT 19 _How to change the rear panel position 1Remove the three screws on the bottom to remove the blank panel. * When installing, take care so that the internal wires are not caught by the panel.3Install the rear panel on the bottom with the three screws. Screw Screw Screw Blank panel Blank panel Example of Rack Mount Screw 2Remove the three screws on the rear panel to remove the rear panel.4Install the blank panel on the rear side with the three screws.
20 Appearance and Dimensions ( ): mm ZOOM REVERSEFOCUS REVERSENOR REV NOR REV CAMERA I / F MONITOR OUT G/L IN TALLY IN BREAKERDC 12V IN YPbPr P/T CONT POWERON OFF SD CARDOPERATE ALARMSCENE MODEPRE CAM BAR TESTUSER1 USER2Camera Controller TALLY MENU ON MENU SPEED ZOOMTELE WIDEFA R NEARFOCUS 12345PRESETCC FLTER3200CROSS6300 4300ND FLTER11/321/16 1/4 SHUTTER OFFSYNCROSTEPGAIN0S1 S2 S39dB 18dB AUTO WHITE BLACK GAINBLACK AUTO M-PED IRISCHECK 8-5/16z (210) 6-15/16z (176) 5/8z (14.5) 2-1/4z (57)5/8z (15)