Panasonic Camera Controller Ak Hrp900p Operating Instructions

Before attempting to connect, operate or adjust this product, 
please read these instructions completely and save this manual for future use.
Model AK-HRP900P
 
Camera Controller 

2
For Your Safety
FCC Note:
This device complies with Part 15 of the
FCC Rules. To assure continued
compliance follow the attached instal-
lation instructions and do not make any
unauthorized modifications.
This equipment has been tested and
found to comply with the limits for a Class
A digital device, pursuant to Part 15 of
the FCC Rules. These limits are de-
signed to provide reasonable protection
against harmful interference when the
equipment is operated in a commercial
environment. This equipment...

3
Contents
For Your Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Check the Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Precautions for Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Controls and their...

4
Outline
Coupling  . . . . . . . . . . . . . . . . . . . . . . .1 pc
Multi-cable  . . . . . . . . . . . . . . . . . . . . . .1 pc
Seal  . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pcSetscrews  . . . . . . . . . . . . . . . . . . . . .8 pcs
M4 x 8 mm  . . . . . . . .4 pcs
M5 x 8 mm  . . . . . . . .4 pcs
≥This unit is a camera controller for multi-purpose camera (AK-HC900P).  This
unit is connected to a multi-purpose camera with one multi-cable, and capable
of transmitting and receiving various...

5 _Operation panel
POWER
ON OFF
SD  CARD
OPERATE
ALARMSCENE
MODEPRE
CAM BAR TESTUSER1 USER2
Camera  Controller
TALLY
MENU
ON
MENU
SPEED ZOOMTELE
WIDEFA R
NEARFOCUS
12345PRESETCC  FLTER3200CROSS6300 4300ND  FLTERCLEAR1/32 1/16 1/4
SHUTTER
OFFSYNCROSTEPGAIN0
S1 S2
S3
9dB 18dB
AUTO
WHITE BLACK
GAINBLACK
AUTO M-PED
IRISCHECK
123
?
@
A
B
C
D
E
F
G
: ; HIJ K L 4
5
6
7
8
9
1Power indication LED [POWER]
It is lighted green when the power control switch 2is ON.  It goes out when the power
control switch 2is OFF....

6
5Menu operation switch [MENU]
Operation switch for camera menu.
Item selection or data change can be done by turning this switch.  When this switch
pushed, the item and data are settled.
6Menu ON switch [MENU ON]
Used to turn the camera menu ON/OFF.
7Preset memory switch [MEMO]
Preset memory can be done up to 5 points with respect to lens zoom, focus, and iris
position (when iris select switch Kis at [MANU]).  When using the preset memory, first
set the lens focus, zoom, and iris.  Next, push this...

7
Controls and their Functions
=Alarm indication LED [ALARM]
It lights up when an alarm is generated (in case of fan stop, wrong communication
speed, etc.).
Note:
In case of wrong communication speed, change the DIP SW position in the unit to
match the camera and communication speed so that the alarm goes out.
>Scene file select switch [SCENE]
Used to select the scene file previously set on the camera.
Note:
With [PRESET] selected, it results in the factory-adjusted setting.
?Mode select switch [MODE]...

8
FGain select switch [GAIN]
Used to select the master gain of the camera.  It changes in the order of 0dB)9dB
)18dB)S1 (Super gain 1))S2)3dB )0dB.
Note:
For super gain setting, check with the camera menu.
GShutter select switch [SHUTTER OFF/STEP/SYNCHRO]
Used to select the electronic shutter of STEP and SYNCHRO set on the camera.
Note:
For electronic shutter setting, check with the camera menu.
HIndication change switch [CHECK]
Used to change the indication item.
IIndicator
It indicates the F value of...

9
Pin No
8
9
10
11
12
13
14
15
Signal
Y signal output
Pb signal output
Pr signal output
Sync signal input
DC 12V
Frame GND
TXD (H)
Signal
Y signal GND
Pb signal GND
Pr signal output
Sync signal GND
DC GND
TXD (C)
RXD (H)
RXD (C)
Pin No
1
2
3
4
5
6
7
CAMERA  I / F
MONITOR  OUT G/L  IN TALLY  IN
BREAKERDC  12V  IN
YPbPr
P/T  CONT
MN O P Q R S
_Rear panel
1 7
2 3 4 5 68 9 10 11 12 13 14 15
TXD:Data from camera to remote controller.RXD:Data from remote controller to camera.
NSwivel stand control signal input...

10
RBreaker [BREAKER]
DC power breaker.  The breaker operates to cut off the power in case of over-current.
SDC12V input connector [DC12V IN] (XLR4-pin)
Connects the AC adapter.  We recommend that the AW-PS505P (option) is used.
1
234
Controls and their Functions
Pin No
1
2, 3
4
Signal
GND
–––
12V