Panasonic Broadband Networking Gateway Kx Hgw200 Operating Instructions

For assistance, please call: 1-800-272-7033
Useful Information
51
Setting the Static Network ParametersÒ
Every computer in a TCP/IP network, including the KX-HGW200, needs to
have an IP address. The KX-HGW200 is preset to assign a local IP
address to each computer in a home network using the DHCP server
function. This type of network is called as dynamic IP network.
By disabling the KX-HGW200 DHCP server function and specifying a
unique IP address for each computer in the home network, a static IP...

52
ÒSetting the Static Network Parameters
Setup of a Windows Computer
The steps below are for Windows 98.
1
Turn on the computer.
2
From the Startmenu, select Settingsand click Control Panel.
3
Double-click the Networkicon.
The Networkdialog box appears.
4
In the Networkdialog box, select the TCP/IPthat is associated
with your network card and click [Properties].
The TCP/IP Propertiesdialog box appears.
5
In the TCP/IP Propertiesdialog box, click the IP Addresstab.
6
Select Specify an IP address....

For assistance, please call: 1-800-272-7033
Useful Information
53
Ò
7
Enter a local IP address for the the computer (i.e, 192.168.0.50)
and the Subnet mask in the appropriate data field. 
³The subnet mask is normally entered as “255.255.255.0”. If you
intend to access the web screen of the KX-HGW200, you
should make this parameter the same as that of the 
KX-HGW200 home side netmask.
8
Click the Gatewaytab.
The window below appears.
9
Enter “192.168.0.254” (default local IP address of the 
KX-HGW200) into...

54
ÒSetting the Static Network Parameters
11
Click the DNS Configurationtab.
12
Select Enable DNS.
13
Enter the DNS server address into the DNS Server Search
Orderaddress field and click [Add].
14
Click [OK].
The System Settings Changedialog box appears.
15
Click [Yes]and restart the computer.
PQQX12817ZA P46 - 58  01.3.8 3:22 PM  y[W  54 

For assistance, please call: 1-800-272-7033
Useful Information
55
Ò
Setup of a Macintosh Computer
The steps below are for Mac OS 9.0.
1
Turn on the computer.
2
From the Apple menu, select Control Panels.
3
From the Control Panelsmenu, select TCP/IP.
The TCP/IPdialog box appears.
4
Select Ethernetfrom the Connect viapop-up menu.
5
Select Manuallyfrom the Configurepop-up menu.
6
Enter a local IP address, Subnet mask, Router address and
Name server address for the computer in the appropriate data
field.
³The...

56
ÒSetting the Static Network Parameters
7
Click the close button.
The dialog box below appears.
8
Click [Save].
9
Restart the computer.
PQQX12817ZA P46 - 58  01.3.8 3:22 PM  y[W  56 

For assistance, please call: 1-800-272-7033
Useful Information
57
Wall MountingÒ
The KX-HGW200 can be mounted on a wall.
1
Remove the stands.
2
Secure the cables to the KX-HGW200 using the hook.
3
Install the two screws (included accessories) into the wall
using the wall template on the next page.
KX-HGW200
WAN
LAN
HOME PNA
WIRELESS
POWER
Hook
Note:
After removing, save the stands and screws for future use.
Note:
Drive screws using the wall template on the next page.
(Continued Ò)
PQQX12817ZA P46 - 58...

58
ÒWall Mounting
4
Mount the unit on the screws, then slide it down.
6.3z (16 cm)
Wall Template
6.3q
(16 cm)
PQQX12817ZA P46 - 58  01.3.8 3:22 PM  y[W  58 

For assistance, please call: 1-800-272-7033
Appendix
59
TroubleshootingÒ
Problem
“The system has detected a conflict
for IP address with the system
having hardware address
XX:XX:XX:XX:XX:XX” or “Another
device on your TCP/IP Internet,
which has the physical address
XX:XX:XX:XX:XX:XX, is currently
using the same IP address
(XXX.XXX.XXX.XXX). Your TCP/IP
network interface has been shut
down.” is displayed in the dialog
box.
“Host Unknown” is displayed after
you changed the KX-HGW200
Setup.
The KX-HGW200 web...

60
ÒTroubleshooting
Problem
You do not remember the home
side IP address of the 
KX-HGW200.
You do not remember the
password (p. 27) to use the 
KX-HGW200 administration web
screens.
Microsoft
®Netmeeting®
conferencing software does not
work.
The Ethernet network does not
work and the ETHERNET indicator
on the KX-HGW200 is not lit.
When you click [Restart]on the
KX-HGW200 web screen, the
home page does not appear.
If you cannot solve your problem
Cause and Remedy
³Check the “Installed gateways” (for...