Panasonic Bluray Disc Home Theater Sound System Sc Btt770 Owners Manual

							Getting started 
21
VQT3D27
Wireless Setting
Network Easy Setting (Home Network Connection Check)Network Easy Setting (Internet Connection Check)
	≥
Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates settings relating 
to the connection and security of wireless LAN devices. To see whether 
your Wireless router supports WPS, check the Wireless router operating 
instructions.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in 
the Setup menu. ( >40)
≥ You can redo these settings individually using “Network Settings”. ( >40)
≥ Do not use this unit to connect to any wireless network for which you do not 
have usage rights.
During automatic searches in a wireless network environment, wireless 
networks (SSID*) for which you do not have usage rights may be 
displayed; however, using these networks may be regarded as illegal 
access.
≥ After performing network settings on this unit, the settings (encryption level, 
etc.) of the Wireless router might change. When you have trouble getting 
online on your PC, perform the network settings on your PC in accordance 
with the settings of Wireless router.
≥ Please be aware that connecting to a network without encryption may 
result in the content of the communication being illegitimately viewed by a 
third party, or the leaking of data such as personal or secret information.
* An SSID (Service Set IDentification) is a name used by wireless LAN to  identify a particular network. Transmission is possible if the SSID matches 
for both devices.
If you have more than one Panas onic player/recorder and the 
remote control operates both products at once, you will
need to change the remote control code on one product to 
prevent this occurrence. ( >40, “Remote Control Code”)
When you experience problems 
with settings
DisplayCheck the following
A conflict with another 
device occurred. ≥
Please wait a few moments, and 
then try again.
A time out error 
occurred. ≥
Setting of the Wireless router for 
MAC Address etc.
≥ The signal may be weak.
≥ The SSID ( >right) and the 
encryption key of the Wireless 
router.
≥ Please wait a few moments, and 
then try again.
An authentication 
error or a time out 
error occurred.
A device error 
occurred.
≥
Contact our Customer Service 
Center or your nearest dealer.
DisplayCheck the 
following
1. LAN cable connection or 
Wireless setting :Fail≥
Connection of 
the LAN 
cables ( >17)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or 
Wireless setting :Pass
≥Connection 
and settings of 
the hub and 
router
≥ Settings of “IP 
Address / 
DNS Settings” 
(> 40)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or 
Wireless setting
:Pass
2. IP address setting :Pass
3. Connection to gateway :Fail
OK
Wireless Settings
Failed to complete.
A conflict with another device occurred.
Do you want to configure wireless network connection
setting again ?
Yes No
OK
Network Easy Setting (Home Network Connection Check)
YesNo
Complete.
1. LAN cable connection         
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
: Fail
: Fail
: Fail
DisplayCheck the following
Cannot find the server.
(Error code: B019) ≥
“Primary DNS” and “Secondary 
DNS” Settings of “IP Address / 
DNS Settings” ( >40)
Failed to connect to the 
server.
(Error code: B020) ≥
The server may be busy or the 
service may have been 
suspended. Please wait a few 
moments, and then try again.
≥ Settings of “Proxy Server 
Settings” ( >40) and the router.
Reprogramming the remote 
control
OK
Network Easy Setting (Internet Connection Check)Complete.
- Connection to the Internet       :   Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
SC-BTT770_370_270P_eng.book  21 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							22
VQT3D27
Occasionally, Panasonic may release updated firmware for this 
unit that may add or improve the way a feature operates. 
These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following 
message is displayed.
To update the firmware
Press [HOME]  > select “Others”  > [OK]  > [OK] (“Setup”) 
>  select “Others”  > [OK]  > select “Firmware Update”  > 
[OK]  > select “Update Now”  > [OK]
DO NOT DISCONNECT the unit from the AC power or perform 
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the 
unit’s display. Unit will restart and the following screen will be 
displayed.
	≥If downloading on this unit fails or this unit is not connected to the 
Internet, then you can download the latest firmware from the following 
website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
>40, “System Information”)≥ Downloading will require several minutes. It may take longer or may 
not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic 
Update Check” to “Off”. ( >40)
Inserting or removing 
media
≥When inserting a media item, ensure that it is facing the right 
way up.
≥ While the reading indicator is displayed, do not turn off the 
unit or remove the media. Such action may result in loss of 
the media’s contents.
≥ When removing the SD card, press on the center of the card 
and pull it straight out.
∫ Selecting the source by the remote 
control
	≥Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected 
video and/or audio.
*1 “(TV)” is displayed next to items set for TV AUDIO input.
*2
“(CABLE/SATELLITE)” is displayed next to DIGITAL IN when set for 
CABLE/SATELLITE AUDIO input.
Firmware updates
New firmware is available.
Please update firmware in Setup.
The firmware was updated.Current Version: x.xx
RETURNOK
ButtonSource
Select disc drive or SD card drive
BD/DVD or SD card (SD) ( >25)
Select iPod/iPhone, FM tuner or external 
audio as the source
iPod (IPOD) ( >32)
FM Radio (FM) ( >29)
To enjoy sound from the TV ( >30)
AUX
*1
ARC*1
DIGITAL IN*1(D-IN)
To enjoy sound from other devices 
( > 30)
DIGITAL IN
*2(D-IN)
[BTT770]  [BTT370]  
HDMI IN1/HDMI IN2 ( >16)
SD CARD
VOLOPEN/CLOSE
DISC/SD
iPodRADIO/EXT-IN
SC-BTT770_370_270P_eng.book  22 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							Getting started 
23
VQT3D27
HOME menu
Major functions of this unit can be operated from the HOME 
menu.
Preparation
Turn on the television and select the appropriate video input on 
the television.
1Press [Í] to turn on the unit.
2Press [3,4, 2,1] to select the item and 
press [OK].
≥ When a media is inserted, contents selection screen for 
that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press 
[RETURN] several times.
To show the HOME menu
Press [HOME].
	≥Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected 
video and/or audio.
*1 “(TV)” is displayed next to items set for TV AUDIO input.
*2
“(CABLE/SATELLITE)” is displayed next to DIGITAL IN when set for 
CABLE/SATELLITE AUDIO input.
Home theater
HOME
OK Videos Music
Photos
EXT IN
FM Radio
Sound Others
iPod
Internet
Content
Videos/
Photos/
Music DiscPlay back the contents. 
(>
25, 28, 29)
≥ When multiple contents are 
recorded, select the types 
of contents or the title.
SD card
Internet 
Content
Displays the Home screen of VIERA CAST 
(>
34)
iPod All
(>32)
Music
Videos
FM 
Radio To enjoy the FM radio (
>29)
EXT IN
AUX*1When using an Audio cable
ARC*
1When using an HDMI cable 
(Available when using an 
ARC compatible TV)
DIGITAL IN*
1, 2When using an Optical digital 
audio cable
[BTT770]  
[BTT370]  
HDMI IN1
HDMI IN2
When connecting to HDMI IN1 
and/or HDMI IN2 terminal 
(
>16)
Sound Select sound quality (equalizer). ( >24)
Others Setup(> 37)
SD Card 
Management
(> 26)
Wallpaper
Changes the screen 
background of the HOME 
menu.
SC-BTT770_370_270P_eng.book  23 ページ  ２０１０年１２月１７日　金曜日　午後７時４４分 
						

							24
VQT3D27
Enjoying sound effects 
from all speakers
1Press [SURROUND] several times to select 
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CHANNEL
You can enjoy sound from the front speakers, as well as 
the surround even when playing a 2-channel sound or 
non-surround sound.
MANUAL
≥ The selected effect will only be displayed on the main 
unit.
2While “MANUAL” is displayed, press 
[2, 1] and select the desired effect.
DOLBY PRO LOGIC II MOVIE
Suitable for movie software, or the one recorded in Dolby 
Surround.
DOLBY PRO LOGIC II MUSIC
Adds 5.1-channel effects to stereo sources.
7.1CH VIRTUAL SURROUND
You can enjoy 6.1/7.1-channel surround-like effect using 
5.1-channel speakers.
SUPER SURROUND
You can enjoy sound from all speakers with stereo 
sources.
2CH STEREO
You can play any source in stereo. Sound will be output to 
the front speakers and the subwoofer only.
≥When you set to “7.1CH VIRTUAL SURROUND“, 
“SUPER SURROUND“ and “2CH STEREO“, “Cinema 
Surround Plus“ ( >36) is not activated.
∫Adjusting speaker level during play
1 Press and hold [ jCH SELECT] to activate the speaker 
setting mode.
2 Press [ jCH SELECT] several times to select the speaker.
Each time you press the button:
* When the optional surround back speakers are connected. L R: Front speaker
(left and right: only the balance is adjustable.)
≥Press [ 2,1] to adjust the balance of the front 
speakers.
C: Center speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer ≥
The channels not included in the playing audio will not 
be displayed (subwoofer is di splayed even if it is not 
included).
3 Press [ 3] (increase) or [ 4] (decrease) to adjust the 
speaker level for each speaker.
s6 dB to  r6 dB
∫ Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥The selected mode will only be displayed on the main 
unit.
2 While the selected mode is displayed
Press [ 2,1 ] and select the desired setting.
EQUALIZER
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER LEVEL You can adjust the amount of bass.
1 (Weakest effect) to  4 (Strongest effect)
≥The setting you make is retained, and recalled every  time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy 
bass sound can be heard clearly, even if the acoustics of 
your room are not optimal.
≥The setting you make is retained, and recalled every time you play from the same type of source.
CENTER FOCUS
(Effective when playing audio containing center 
channel sound.) You can make the sound of the center speaker seem like 
it is coming from within the TV.
WHISPER-MODE SURROUND You can enhance the surround effect for low volume 
sound. (Convenient for late night viewing.)
	≥ The sound effects/modes may not be available or have no effect with some 
sources.
≥ You may experience a reduction in sound quality when these sound 
effects/modes are used with some sources. If this occurs, turn the sound 
effects/modes off.
Enjoying surround sound 
effects
      L R  C RSRB* LB*LS SW
\
\
\b
SC-BTT770_370_270P_eng.book  24 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							Getting started 
Playback
25
VQT3D27
Playb ack
Playing video contents
[BD]  [DVD]  [CD]  [SD]
1Insert the media.
If the menu is displayed, press [OK] or [ 3,4 ,2, 1] to 
select the item. ( >23)
2Press [ 3,4] to select the title and press 
[OK].
When a message screen is displayed while playing back 
3D compatible video software, play back in accordance 
with the instructions.
∫ To show menus
You can show Top Menu, DIRECT NAVIGATOR or Pop-up Menu.
Press [POP-UP MENU, TOP MENU].
≥Press [ 3,4, 2,1 ] to select the item and press [OK].
∫ To show the status messages
While playing, press [STATUS].The status messages give you information about what is currently 
being played. Each time you press [STATUS], the display 
information may change or will disappear from the screen.
	≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press 
[∫STOP] when you finish to preserve the unit’s motor and your television 
screen.
≥ Depending on media and contents, the display may change or may not 
appear.
≥ It is not possible to playback AVCHD and MPEG2 video which have been 
dragged and dropped, copied and pasted to the media.
These functions may not work depending on the media and its 
contents.
Press [ ∫STOP].
The stopped position is memorized.
Resume play function
Press [ 1PLAY] to restart from this position.
≥
The position is cleared if the tray is opened or you press 
[∫STOP] several times to display “STOP” on the unit’s display.
≥ On BD-Video discs including BD-J, the resume play 
function does not work.
Press [ ;PAUSE].
≥Press [ ;PAUSE] again or [ 1PLAY] to restart play. Search
While playing, press [SEARCH
6] or 
[SEARCH 5].
≥Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH 6] or 
[SEARCH 5].
≥BD-Video and AVCHD:  Forward direction [SEARCH 5] 
only.
The speed increases up to 5 steps.
≥ Press [ 1PLAY] to revert to normal playback speed.
While playing or paused, press [ :] or [9 ].
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
While paused, press [ 2] (2;) or [1] (;1 ).
≥Press and hold to change in succession forward or 
backward.
≥ Press [ 1PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [ 1] (;1 ) only.
1Press and hold [j AUDIO] to activate the 
audio setting mode.
2Press [ jAUDIO] several times to select the 
audio.
You can change the audio c hannel number or soundtrack 
language, etc.
∫ Selecting the type of audio from the 
DIGITAL AUDIO IN
 terminal
Select to suit the type of audio from the DIGITAL IN terminal on 
the main unit.
1 Press [EXT-IN] several times to select “DIGITAL IN” (D-IN).
2 Press and hold [ jAUDIO] to activate to select the type.
3 Press [ jAUDIO] several times to select the type.
MAIN
SAP*
MAIN rSAP*  (stereo audio)
* “SAP” = Secondary Audio Program
(Only works with Dolby Dual Mono)
≥ “MAIN” or “SAP” is not available if “On” is selected in 
“PCM-FIX” of “DIGITAL IN”. ( >38)
	≥Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not 
output from the HDMI AV OUT terminal.
Other operations during play
Stop
Pause
PlayBD-Video T1     C1     0:05.140:20.52
Current position
e.g. BD-Video
To t a l  t i m e
Elapsed time in the title
T: Title, C: Chapter, PL: Playlist
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
SC-BTT770_370_270P_eng.book  25 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							26
VQT3D27
1Press [SUB MENU].
2Select an item and press [OK].
While DIRECT NAVIGATOR screen is displayed
While playing
≥Depending on the played contents if you perform “Screen 
Aspect”, there may be no effect.
≥ When “TV Aspect” ( >39) is set to “4:3” or “4:3 Letterbox”, 
the “Zoom” effect in “Screen Aspect”  is disabled.
	≥ Depending on the media and contents, displayed items are different.
BD-Live allows you to enjoy more functions such as subtitles, 
exclusive images and online games  by connecting this unit to 
the Internet. Since most of the BD-Live compatible discs are 
played back using the BD-Live function, additional contents 
are required to be downloaded into  the external memory (local 
storage).
≥ This unit is using an SD card as a local storage device. 
BD-Live function cannot be used when there is no SD card 
inserted.
1Perform network connection and settings. 
(> 17, 20)
2Insert an SD card with 1 GB or more free 
space.
3Insert the disc.
∫Deleting data/Formatting SD cards
If you no longer need data recorded on the SD card, you can 
delete data with the following operation.
1 Insert an SD card.
2 Press [HOME].
3 Press [ 3,4 ,2, 1] to select “Others” and press [OK].
4 Press [ 1] to select “SD Card Management” and press 
[OK].
5 Press [ 3,4 ] to select “BD-Video Data Erase” or “Format 
SD Card” and press [OK].
6 Press [ 2,1 ] to select “Yes” and press [OK].
7 Press [ 2,1 ] to select “Start” and press [OK].
To turn on/off secondary video and audio
[DISPLAY] > select “Disc” > [ 1] > select 
“Signal Type” > [OK] > set “Video” and 
“Soundtrack” in “Secondary Video” to “On” or 
“Off”
A Secondary video
B Primary video
	≥The usable functions and the operating method may vary with each disc, 
please refer to the instructions on the disc and/or visit their website.
≥ Some BD-Live content available on the Blu-ray discs may require an 
Internet account to be created in order to access the BD-Live content. 
Follow the screen display or instruction manual of the disc for information 
on acquiring an account.
≥ To use the BD-Live functions, it is recommended that you format the card 
on this unit. If the SD card you use is formatted, all data on the card will be 
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs 
(> 37).
≥ When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, 
secondary audio will not be played ( >38).
Useful functions
PropertiesTo display the titles properties (recording 
date, etc.)
View 
ChaptersTo select the chapter
View 
PlaylistsTo play playlists
View TitlesTo select the title.
Screen 
AspectWhen black bars are shown at the top, 
bottom, left, and right sides of the screen, 
you can enlarge the image to fill the screen.
Top MenuTo display Top Menu.
Pop-up 
MenuTo display Pop-up Menu.
MenuTo display Menu.
3D Settings2D video can be virtually output as 3D, or 
output effect of the 3D video can be setup. 
(> 27)
Enjoying BD-Live or 
picture-in-picture in BD-Video
Enjoying BD-Live discs with 
Internet
Playing picture-in-picture
SD Card Management
No. of Files    6
Free space    300 MB
SD card
Format this SD Card.
BD-Video Data Erase
Format SD Card
OKRETURN


SC-BTT770_370_270P_eng.book  26 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							Playback
27
VQT3D27
Enjoying 3D video
You can enjoy powerful 3D videos with realistic sensations by 
connecting this unit with a High Speed HDMI Cable to a 3D 
compatible TV.
PreparationConnect 3D compatible TV to an HDMI AV OUT terminal of 
this unit using a High Speed HDMI Cable and select HDMI 
video input mode on the TV. (>14, 15)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback. 
(> 25)
≥ Playback following the instructions displayed on the screen.
Perform the following settings as necessary.
1While playing, 
Press [SUB MENU].
2Press [ 3,4] to select “3D Settings” and 
press [OK].
3Select an item, then press [OK].
	≥ Depending on the contents, displayed items are different.
≥ Please refrain from viewing 3D images if you do not feel well or are 
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort 
while viewing 3D images, discontinue use and rest your eyes.
≥ Depending on the connected TV, the video being played back might switch 
to 2D video due to changes in resolution etc. Check the 3D setting on the 
TV.
≥ 3D images may not output as settings of “HDMI Resolution” and “24p 
Output”. ( >39)
3D settings
3D BD-Video 
PlaybackIt is also possible to play back 3D discs 
in 2D (conventional video). ( >37)
3D TypeIf 3D video cannot be played back in 
3D, change the settings  as required by 
the connected TV format. ( >39)
≥ Change the settings for 3D on the TV 
also when “Checker board” or “Side 
by side” is selected.
3D Playback 
PrecautionsHide the 3D viewing warning screen. 
(> 39)
Pop-Out LevelAdjust the pop-up position for the 
Playback menu or message screen etc. 
(>36)
The illustration is an image.
Useful functions
Signal 
FormatOriginalKeep original picture 
format.
Side by side3D picture format 
comprising of left and right 
screens. 
2D to 3DConverts 2D pictures to 3D 
effect.
3D 
Picture 
ModeNormalPlayback pictures with 
normal 3D effects.
SoftYou can enjoy 3D pictures 
with a feeling of 
broadness, holding back 
the depth perception.
Manual 
SettingsSet 3D effect manually.
Distance
Set the amount of depth 
perception.
Screen Type
Selects how the screen 
appears during 3D 
playback (flat or round).
Frame Width
Set the amount of 
feathering at the edge of 
screen.
Frame Color
Set the color of feathering 
at the edge of screen.
SC-BTT770_370_270P_eng.book  27 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							28
VQT3D27
Playing still pictures
[BD] [DVD]  [CD]  [SD]
(BD-RE, DVD-R/R DL, CD-R/RW, SD Card)
In order to play back 3D still pictures (MPO), this unit should be 
connected to a Full HD 3D compatible TV via an HDMI 
terminal.
1Insert the media.
If the menu is displayed, press [OK] or [ 3,4 ,2, 1] to 
select the item. ( >23)
2Press [ 3,4] to select the folder and press 
[OK].
“3D View” : 3D still pictures (MPO) are sorted here. To play 
back in 3D, select from “3D View”. (Still pictures in “2D 
View” are played back in 2D)
To select folders or still pictures that are played on 
slideshow.
3Press [ 3,4, 2,1] to select the still 
picture and press [OK].
Press [ 2,1] to display the previous or next still picture.
To exit the screen
Press [RETURN].
∫ To show the still picture properties
While playing, press [STATUS] once or twice.
To exit the screen
Press [STATUS].
1Press [SUB MENU].
2Select an item, then press [OK].
While Photo View screen is displayed
While playing
	≥Depending on the condition of the unit and media contents, displayed items 
are different.
≥ When viewing a 3D still picture, some functions may not work.
≥ When a still picture with large number of pixels is played, the display 
interval may become longer. Even if the setting is changed, the display 
interval may not become shorter.
≥ When both a music CD and an iPod/iPhone is inserted to this unit, the 
iPod/iPhone has a priority to be played back as background music.
≥ Still pictures displayed as “ ” cannot be played back with this unit.
Photo ViewSD card
42
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX XXXX
58
105
77
485
Page UpPage Down Page01/02
SlideshowSelectSUB
MENUOKRETURNRG B Y
2D ViewPhotos
Folder Name
3D View
                                    
Date           11/12/2007 
Size            500 x 375
Manufacturer
Equipment 1 / 26
Useful functions
SlideshowStart Slideshow
You can display still pictures one by one at 
a constant interval.
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Random Soundtrack
Background music is played in random 
order.
Soundtrack
An MP3 on the iPod/iPhone or a music CD 
can be played back during the slideshow of 
JPEG on the SD card. 
Start 
SlideshowStart the slideshow.
Screen 
AspectSwitch the screen mode.
StatusShow the still picture properties.
Rotate 
Right
Rotate the still picture.
Rotate Left
WallpaperSet the still picture to the wallpaper of 
HOME screen. (
>23)
Pop-Out 
LevelPop-up position for the Playback menu or 
message screen etc. can be adjusted 
during 3D playback.
SC-BTT770_370_270P_eng.book  28 ページ  ２０１０年１２月２４日　金曜日　午前１０時５７分 
						

							RadioPlayback
29
VQT3D27
Playing music
[DVD] [CD]
(DVD-R/R DL, music CD, CD-R/RW)
1Insert the media.
If the menu is displayed, press [OK] or [ 3,4 ,2, 1] to 
select the item. ( >23)
2Press [ 3,4] to select the track and press 
[OK].
1While the DIRECT NAVIGATOR screen is displayed
Press [SUB MENU].
2Press [ 3,4] to select “Select Folder” and 
press [OK].
	≥ You cannot select folders that contain no compatible tracks.
Radio
Listening to the Radio
Up to 30 stations can be set.
1Press [RADIO] to select “FM”.
2Press [STATUS] to select the position to 
start the auto preset search.
LOWEST:
To begin auto preset with the lowest frequency (FM87.9 or 
FM87.5).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Presetting stations 
manually”.
3Press and hold [OK].
Release the button when “AUTO” is displayed.
The tuner starts to preset all th e stations it can receive into 
the channels in ascending order.
	
≥ “SET OK” is displayed when the stations are set, and the radio tunes to the 
last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset 
the stations manually.
Preparation
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH 6] or [SEARCH 5] to select the 
frequency.
≥ To start automatic tuning, press and hold [SEARCH 6], [SEARCH5] 
until the frequency starts scrolling. Tuning stops when a station is found.
1While listening to the radio broadcast
Press [OK].
2While “P” is flashing on the display
Press the number buttons to select a 
channel.
To select a 1-digit number
e.g., 1: [1] B[OK].
To select a 2-digit number
e.g., 12: [1] B[2]
	≥A station previously stored is overwritten when another station is stored in 
the same channel preset.
Playing a track in another 
folder
 0.09  4.30
01
02
03
04
05Music listNo.
Track Name Play Time Track1
Track1 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track25 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5
DIRECT NAVIGATORCD
PlayRETURN
“ ” indicates the track currently playing.
Presetting stations 
automatically
Presetting stations manually
SC-BTT770_370_270P_eng.book  29 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							30
VQT3D27
1Press [RADIO] to select “FM”.
2Press the number buttons to select the 
channel.
To select a 1-digit number
e.g., 1: [1]B[OK].
To select a 2-digit number
e.g., 12: [1] B[2].
Alternatively, press [ W,X] or [ 3,4 ].
∫ Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo broadcasting
TUNED:
Displayed when receiving monaur al broadcasting or monaural 
sound is selected.
∫ FM frequency step
Main unit:
The factory setting is set to 0.2 MHz, it can be changed to 
receive broadcasts allocated in 0.1 MHz. You may need to 
change this setting if the tuner seems to skip over the correct 
frequency for stations in your area.
1 Press [RADIO] to select “FM”.
2 Press and hold [RADIO].
After a few seconds the display changes to show the 
current lowest frequency. Continue to hold the button 
down. The lowest frequency changes and the step is 
changed.
To return to the original settings, repeat steps  1 and 2.
	≥ After changing the setting, previously preset frequencies will be cleared. 
Preset them again.
TV
Enjoying TV with unit’s 
speakers
Preparation
Turn on your TV and select the appropriate audio input mode 
[AUX, ARC,  D-IN] to suit the connections to this unit. ( >23)
You can enhance stereo sources with surround sound effect.
1Press [SURROUND] several times to select 
the effect.
2While “MANUAL” is displayed on the unit’s display
Press [ 2,1] and select the desired effect.
For more detailed information on this operation, please refer to 
the “Enjoying surround sound effects” section on page 24.
You can adjust the mode depending on the source or situation.
1Press [SOUND] several times to select the 
mode.
2While the selected mode is displayed on the unit’s 
display
Press [ 2,1] and select the desired setting.
For more detailed information on this operation, please refer to 
the “Changing the sound modes” section on page 24.
Listening/confirming the preset 
channels
∫ If noise is excessive
1 Press and hold [ jAUDIO] to activate to select the type.
2 Press [ jAUDIO] to display “MONO”.
The sound becomes monaural.
Press the button again in step  2 to cancel the mode. “AUTO 
STEREO” will be displayed on the main unit. Depending on 
the broadcast system, stereo or monaural will be selected.
“MONO” is also canceled when you change the frequency.
≥ This setting can be preset  for each broadcasting station.
Surround sound effects
Surround modes to enjoy TV audio or stereo 
sources from all speakers:
≥DOLBY PRO LOGIC II MOVIE
≥ DOLBY PRO LOGIC II MUSIC
≥ SUPER SURROUND
Sound modes
SC-BTT770_370_270P_eng.book  30 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分