Panasonic Bluray Disc Home Theater Sound System Sc Btt770 Owners Manual

							PPCVQT3D27-3
Owner’s Manual
Blu-ray Disc
TM Home Theater Sound System
Model No. SC-BTT770 SC-BTT370
SC-BTT270
SC-BTT273
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this pr oduct, please read the instructions completely.
Please keep this manual for future reference.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
The illustration shows the image of the unit SC-BTT770.
VQT3D27~Cover_eng.fm  1 ページ  ２０１１年１月６日　木曜日　午後１時２１分 
						

							2
VQT3D27
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, follow the attached 
installation instructions and use only shielded interface cables when 
connecting to peripheral devices. Any changes or modifications not 
expressly approved by the party responsible for compliance could void the 
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including 
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADAThis device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions: 
(1) This device may not cause interference, and (2) this device must\
 accept 
any interference, including interference that may cause undesired operation 
of this device.
Contains FCC ID: RYYWYPAEBUX4
Contains IC:4389B-WYPAEBUX4
This transmitter must not be co-located or operated in conjunction with any 
other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 
5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 
5.15 to 5.25 GHz to reduce the potential for harmful interference to 
co-channel Mobile Satellite systems. High power radars are allocated as 
primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These 
radar stations can cause interference with and/or damage this product.
This equipment complies with FCC/IC radiation exposure limits set forth for 
an uncontrolled environment and meets the FCC radio frequency (RF) 
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC 
radio frequency (RF) Exposure rules. This equipment has very low level\
s of 
RF energy that it deemed to comply without maximum permissive exposure 
evaluation (MPE). But it is desirable that it should be installed and operated 
keeping the radiator at least 20cm or more away from person’s body 
(excluding extremities: hands, wrists, feet and ankles).
[BTT770]
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded 
interface cables must be used with this equipment. Operation with 
non-approved equipment or unshielded cables may result in interference 
to radio and TV reception. Any changes or modifications not approved by 
the party responsible for compliance could void the user’s authority to 
operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including 
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
WARNING:To satisfy FCC RF exposure requirements for mobile transmitting devices, \
a separation distance of 20 cm or more should be maintained between the 
antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not
recommended. The antenna used for this transmitter must not be 
co-located in conjunction with any other antenna or transmitter.
[BTT770]
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
[BTT770] [BTT370]
THE FOLLOWING APPLIES ONLY IN CANADA.
For main unit
Product Identification Marking is located on the bottom of the unit.
[BTT770]
For wireless system
Product Identification Marking is located on the bottom of wireless system.
VQT3D27~Safety_eng.fm  2 ページ  ２０１０年１２月２７日　月曜日　午後４時１４分 
						

							3
VQT3D27
IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the 
safety instructions on the unit and the applicable safety instructions listed 
below. Keep these operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers,  stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug.  A polarized plug has two blades with one wider than the other. 
A grounding-type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of 
the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at  plugs, convenience receptacles, and the point where they exit from the 
apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table 
specified by the manufacturer, or sold with the 
apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury 
from tip-over.
13 Unplug this apparatus during lightning storms or when  unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required  when the apparatus has been damaged in any way, such as 
power-supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been dropped.
UnitTo reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified service 
personnel.
Unit– This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous 
radiation exposure.
– Do not place sources of naked flames, such as lighted candles, on this unit.
PlacementTo reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet or in another 
confined space. Ensure this unit is well ventilated.
– Do not obstruct this unit’s ventilation openings with newspapers, 
tablecloths, curtains, and similar items.
(Inside of product)
-If you see this symbol-
WARNING
CAUTION
Information on Disposal in other Countries outside the 
European Union This symbol is only valid in the European 
Union.
If you wish to discard this product, please 
contact your local authorities or dealer and ask 
for the correct method of disposal.
The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may be 
of sufficient magnitude to constitute a risk of 
electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
RISK OF ELECTRIC SHOCK DO NOT OPEN
VQT3D27~Safety_eng.fm  3 ページ  ２０１０年１２月２７日　月曜日　午後３時５７分 
						

							4
VQT3D27
Table of contents
IMPORTANT SAFETY INSTRUCTIONS .........  3
Getting started
Accessory.........................................................  5
Control reference guide....................................  6
•Remote control .................................................................  6
•Main unit (Front) ...............................................................  7
•Main unit (Rear)................................................................  7
Playable discs/Cards........................................  8
Unit and media care .........................................  9
Using the remote control ..................................  9
STEP 1 : Preparing the speakers...................  10
•Assembling the speakers ...............................................  10
•Preparing cables and making connection ......................  11
STEP 2 : Positioning ......................................  12
STEP 3: Connections .....................................  13
•Speaker cable connection ..............................................  13
•Connection to a TV ........................................................  14
•Connection with Set Top Box, etc. .................................  16
•Radio antenna connection .............................................  16
•[BTT770]  Digital transmitter connection............................  17
•Connection to a broadband network ..............................  17
STEP 4: 
AC power supply cord connection..................  18
STEP 5: 
[BTT770] 
Preparing the wireless system .......................  18
STEP 6: Easy setup .......................................  19
•Network Easy Setting .....................................................  20
•Reprogramming the remote control................................  21
•Firmware updates...........................................................  22
Inserting or removing media...........................  22
HOME menu ..................................................  23
Enjoying sound effects from all speakers.......  24
•Enjoying surround sound effects ....................................  24
Playback
Playing video contents ...................................  25
•Other operations during play ..........................................  25
•Useful functions ..............................................................  26
•Enjoying BD-Live or picture-in-picture in BD-Video........  26
Enjoying 3D video ..........................................  27
•3D settings .....................................................................  27
•Useful functions ..............................................................  27
Playing still pictures........................................  28
•Useful functions ..............................................................  28
Playing music .................................................  29
•Playing a track in another folder .....................................  29
Radio
Listening to the Radio .....................................  29
•Presetting stations automatically ...................................  29
•Presetting stations manually ..........................................  29
•Listening/confirming the preset channels ......................  30
TV
Enjoying TV with unit’s speakers ....................  30
•Surround sound effects..................................................  30
•Sound modes.................................................................  30
Linked operations with the TV 
(VIERA LinkTM “HDAVI ControlTM”)..................  31
•Setting the audio link .....................................................  31
•Easy control only with VIERA remote control ................  32
Other devices
Using the iPod/iPhone ....................................  32
•iPod/iPhone Connection ................................................  32
•iPod/iPhone Playback ....................................................  33
Advanced operations
Enjoying VIERA CASTTM................................  34
Playback menu ...............................................  35
Setup menu ....................................................  37
•Speaker settings ............................................................  41
Optional speaker settings
Speaker installation option .............................  42
Reference
Troubleshooting guide ....................................  43
Messages .......................................................  45
Supplemental information ...............................  46
Specifications .................................................  48
Limited Warranty (ONLY FOR U.S.A. 
AND PUERTO RICO) .....................................  50
Limited Warranty (Only for CANADA) ............  51
Index .................................................  Back cover
	•POWER-SAVING FEATURES ..................................  7
SC-BTT770_370_270P_eng.book  4 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							Getting started 
TV Radio Playback
Other devices
Advanced operations
Reference Optional speaker 
settings
5
VQT3D27
Getting startedIndicates features applicable to:
[BTT770] : SC-BTT770 only
[BTT370] : SC-BTT370 only
[BTT270] : SC-BTT270 only
[BTT273] : SC-BTT273 only
≥ Some accessories and external devices mentioned in this Owner’s Manual that are not included with this product may 
not be on sale in certain regions.
≥ Please note that the actual controls and components, menu items, etc. of your Blu-ray Disc Home Theater Sound 
System may look somewhat different from those shown in the illustrations in this Owner’s Manual.
Accessory
Check the supplied accessories before using this unit.
For accessories of speakers, refer to page 10.
[For_Canada]
The enclosed Canadian French label sheet corresponds to the 
English display on the front and back side of the unit.	≥ Product numbers provided in this Owner’s Manual correct as of December 
2010. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
≥ [For_U.S.A._and_Puerto_Rico.] : To order accessories, refer to “Accessory 
Purchases (United States and Puerto Rico)” on page 50.
[For_Canada] : To order accessories, call the dealer from whom you have 
made your purchase.
≥ This Owner’s Manual is applicable to models 
SC-BTT770, SC-BTT370, SC-BTT270 and SC-BTT273. 
Unless otherwise indicated, illustrations in this Owner’s 
Manual are of SC-BTT770.
≥
Operations in this Owner’s Manual are described mainly 
with the remote control, but you can perform the 
operations on the main unit if the controls are the same.
SystemSC-BTT770SC-BTT370SC-BTT270SC-BTT273
Main unit SA-BTT770 SA-BTT370 SA-BTT270 SA-BTT273
Speaker system Front speakers SB-HF775 SB-HF370 SB-HF270 SB-HF370
Center speaker SB-HC775 SB-HC370 SB-HC270 SB-HC370
Surround speakersSB-HS270 SB-HS270 SB-HS270 SB-HS270
Subwoofer SB-HW370 SB-HW370 SB-HW270 SB-HW270
Wireless system (with digital transmitter)SH -F X 71———
[BTT770] [BTT370]  [BTT270]  [BTT273] 
∏ 1 Remote control
(N2QAYB000632) ∏
1 Remote control
(N2QAYB000632) ∏
1 Remote control
(N2QAYB000629) ∏
1 Remote control
(N2QAYB000629)
∏ 2 Batteries for remote 
control ∏
2 Batteries for remote 
control ∏
2 Batteries for remote 
control ∏
2 Batteries for remote 
control
∏ 1 Sheet of speaker cable 
sticker ∏
1 Sheet of speaker cable 
sticker ∏
1 Sheet of speaker cable 
sticker ∏
1 Sheet of speaker cable 
sticker
∏ 1 FM indoor antenna
(RSAX0002) ∏
1 FM indoor antenna
(RSAX0002) ∏
1 FM indoor antenna
(RSAX0002) ∏
1 FM indoor antenna
(RSAX0002)
∏ 2 AC power supply cord
(K2CB2CB00021)
(RFAX0023) with a 
ferrite core ∏
1 AC power supply cord
(K2CB2CB00021) ∏
1 AC power supply cord
(K2CB2CB00021) ∏
1 AC power supply cord
(K2CB2CB00021)
∏ 1 Digital transmitter
(RFAX1012B) ∏
1 HDMI cable
(K1HA19DA0005)
VQT3D27~Body_mst.fm  5 ページ  ２０１１年１月７日　金曜日　午前９時３６分 
						

							6
VQT3D27
Control reference guide
1 Turn the unit on and off 
2 Select title numbers, etc./Enter numbers or characters (>34)
[CANCEL]: Cancel
3 Select the source ( >22)
4 Basic playback control buttons ( >25)
5 Select preset radio stations
6 Show status messages ( >25)
7 Display the Home screen of VIERA CAST ( >34)
8 Selection/OK, Frame-by-frame ( >25)
9 Show sub menu ( >26)
10 These buttons are used when;
≥Operating a BD-Video disc that includes Java
TM 
applications (BD-J).
≥ Operating contents of VIERA CAST ( >34)
11 Set the sound mode ( >24)/Select speaker channel 
(> 24)
12 Select surround sound effects ( >24)/Set the sleep timer
13 TV operation buttons
[ Í ]: Turn the television on and off
[AV, INPUT]: Switch the input select
[ ij VOL]: Adjust the volume
14 Adjust the volume of the main unit
15 Mute the sound ≥“MUTE” flashes on the unit’s display, while the function is 
on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if the unit is turned off.
16 Show NETFLIX screen
17 Select radio stations manually ( >29)
18 Exit the menu screen
19 Show HOME menu ( >23)
20 Show Pop-up menu/Top menu/Direct Navigator ( >25)
21 Return to previous screen
22 [BTT770]  [BTT370]  : Start up a video communication ( >34)
23 Show Playback menu ( >35)/Select audio ( >25)
0é0ð0î0æ
0â0÷
0ó0æ0õ0ö0ó0ï
0ô0ì0ê0ñ
0ñ0í0â0ú
0ñ0â0ö0ô0æ
0ô0õ0ð0ñ
0ô0æ0â0ó0ä0é 0ô0æ0â0ó0ä0é
0ô0í0ð0ø0ô0ì0ê0ñ
0ê0ï0ñ0ö0õ
0æ0ù0ê0õ
1
0ñ110å0ê0ô0ä
0ñ0ð0ñ0Î0ö0ñ0Á0î0æ0ï0ö0÷0ê0æ0ó0â0Á0ä0â0ô0õ0õ0ð0ñ0Á0î0æ0ï0ö
18
8 20
21
23
13
19
1
417
22
14
16 15
2
3
5
6
7
9
10 11
12
Remote control
1 Press and hold [–SLEEP].
2 While “SLEEP  ££” is displayed, press [–SLEEP] 
several times to select the time (in minutes).
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when canceling the setting.
≥ To confirm the remaining time
Press and hold the button again.
SC-BTT770_370_270P_eng.book  6 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							Getting started 
7
VQT3D27
1Standby/on switch (POWER Í/I) ( > 19)
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a small 
amount of power.
2 Open or close the disc tray ( >22)
3 Adjust the volume of the main unit
4 Disc tray
5 Stop ( >25) 6 Start play (
>25)
7 SD card slot ( >22)
8 Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20
oup and down, 30 oleft and right
9 Display 
10 Connect iPod/iPhone ( >32)
1 AC IN terminal ( >18)
2 Speaker terminals ( >13)
3 Cooling fan
4 [BTT770]  [BTT370]  USB port for the Communication Camera 
TY-CC10W (optional) ( >34)
5 LAN port ( >17)
6 HDMI AV OUT (ARC) terminal ( >15)
7 [BTT770]  [BTT370]  HDMI 1 IN (CABLE/SAT) terminal ( >16)
8 [BTT770]  [BTT370]  HDMI 2 IN terminal ( >16) 9 FM radio antenna terminal (
>16)
10 DIGITAL AUDIO IN terminal ( >14 , 15)
11 AUX terminal ( >14)
12 VIDEO OUT terminal ( >14)
13 [BTT770]  Digital transmitter dock for supplied wireless 
system (> 17)
[BTT370]  Digital transmitter dock for optional wireless 
system (> 12)
Main unit (Front)
SD CARD
iPod
VOL
POWEROPEN/CLOSE
12 3
457 61 0
89
Pull open.
POWER-SAVING FEATURES
The main unit is designed to conserve its power consumption and save energy.
[BTT770]  [BTT370]  Wireless system (SH-FX71) does not have this function.
≥Automatic power-down function
The main unit will automatically switch to standby mode after 
30 minutes if the main unit is inactive as follows.e.g.
jThere is no audio signal from an external device.
jDisc playback is stopped/paused.
jiPod/iPhone playback is stopped/paused.
jThe disc menu is displayed and play is not selected.
(This function may not work depending on the application 
type of discs.)
Main unit (Rear)
SUBWOOFER365214333RLR LΩ
Ω
Ω
Ω3CENTERSURROUNDFRONTLANAUXFM ANT
Ω
75COMMUNICATIONCAMERA
12345671311128910
VQT3D27~Body_mst.fm  7 ページ  ２０１１年１月５日　水曜日　午前１１時１４分 
						

							8
VQT3D27
Playable discs/Cards
∫Discs that cannot be played in this unit
Any other disc that is not specifically supported or 
previously described.
≥DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ DivX discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the 
region code  “A ”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the 
region number “ 1” or “ ALL”.
Example:
TypeLogo 
examplesType detailPlayable contents  (> 49)
[BD]
BD-VideoVideo
BD-REVideo
JPEG/MPO (3D still picture)
BD-RVideo
[DVD]
DVD-VideoVideo
DVD-RVideo
AVCHD
MP3
JPEG/MPO (3D still picture)
DVD-R DL
DVD-RWVideo
AVCHD
—
+R/+RW/+R DL
[CD]
Music CDMusic [CD-DA]
—CD-R
CD-RWMusic [CD-DA]
MP3
JPEG/MPO (3D still picture)
[SD]
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB) SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro types) (as of December 2010)MPEG2
AVCHD
JPEG/MPO (3D still picture)
24
1ALL1
SC-BTT770_370_270P_eng.book  8 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							Getting started 
9
VQT3D27
∫Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by 
a recorder, etc. needs to be finalized by the recorder to play on 
this unit. Please refer to the recorder’s instructions.
∫BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby 
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master 
Audio) adopted in BD-Video.
∫Music CD
≥Operation and sound quality of CDs that do not conform to 
CD-DA specifications (copy  control CDs, etc.) cannot be 
guaranteed.
≥ The digital audio content side of a DualDisc does not meet 
the technical specifications of the Compact Disc Digital 
Audio (CD-DA) format so playback may not be possible.
∫ 3D
≥3D videos and 3D still pictures can be played back when this 
unit is connected to a 3D compatible TV using a High Speed 
HDMI Cable.
≥ 2D video can be enjoyed as 3D virtually. ( >27)
∫SD card
≥miniSD Cards, microSD Cards, microSDHC 
Cards and microSDXC Cards can be used, but 
must be used with an adaptor card. These are 
usually supplied with such cards, or otherwise 
customer provided.
≥ Keep the Memory Card out of reach of children 
to prevent swallowing.
≥ To protect the card’s contents, move the record prevention 
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD 
Card Specifications FAT12 and FAT16 formats, as well as 
SDHC Memory Cards in FAT32 format (Does not support 
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or 
devices, recorded contents may be erased due to the card 
being formatted etc.
≥ Useable memory may be slightly less than the card capacity.
	≥ It may not be possible to play the above media in some cases due to the 
type of media, the condition of the recording, the recording method and 
how the files were created.
≥ The producers of the disc can control how discs are played. So you may 
not always be able to control play as described in this Owner’s Manual. 
Read the disc’s instructions carefully.
Unit and media care
∫ Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the 
instructions that came with the cloth.
∫ Clean the lens
≥Use the lens cleaner (not supplied) to clean the unit’s lens.
∫ Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc and card handling precautions
≥Handle discs by the edges to avoid inadvertent scratches or 
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static 
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals 
on the rear side of the card.
≥ Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or 
labels (rented discs etc).
j Discs that are badly warped or cracked.
j Irregularly shaped discs,  such as heart shapes.
∫To dispose or transfer this unit
The unit may keep the user settings information in the unit. If 
you discard this unit either by  disposal or transfer, then follow 
the procedure to return all the settings to the factory presets to 
delete the user settings. ( >43, “To return all settings to the 
factory preset”)
≥ The operation history may be recorded in the memory of this 
unit.
Using the remote 
control
Insert so the poles (+ and –) match those in the remote control.
Point it at the remote control signal sensor on this unit. ( >7)
	Mishandling of batteries can cause electrolyte leakage which can damage 
items the fluid contacts and may cause a fire.
≥Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long 
period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long 
period of time. Store in a cool, dark place.
DO DO NOT
CAUTION≥Danger of explosion if battery is incorrectly replaced. Replace only with 
the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities or 
dealer and ask for the correct method of disposal.

R6/LR6, AA

(Alkaline or 
manganese batteries)
SC-BTT770_370_270P_eng.book  9 ページ  ２０１０年１２月１６日　木曜日　午後９時５１分 
						

							10
VQT3D27
STEP 1 : Preparing the speakers
Caution
≥Do not stand on the base. Be cautious when children are 
near.
≥ When carrying speakers, hold the stand and base parts.Preparation
≥To prevent damage or scratches, lay down a soft cloth and 
perform assembly on it.
≥ For wall mount, refer to page 42.
≥ Keep the screws out of reach of children to prevent 
swallowing.
[BTT770]  
[BTT770]
∏2 Front speakers∏2 Bases
(RYK1610-K1)∏4 Screws A
(XTN5 i10FFJK)
∏ 2 Stands (with cables)
(RYK1609E-K: RED)
(RYK1609D-K: WHITE)∏3 Speaker cables
(REEX1268: GREEN)
(REEX1269: GRAY)
(REEX1270: BLUE)∏2 Screws B
(XYN5 iJ18FJK)
∏ 2 Speaker cables 
(for SH-FX71)
(REEX1155B-1: GRAY)
(REEX1156B-1: BLUE)
[BTT370]  [BTT273]
∏ 2 Front speakers∏5 Speaker cables
(REEX1266A: RED)
(REEX1267A: WHITE)
(REEX1268: GREEN)
(REEX1269: GRAY)
(REEX1270: BLUE)∏2 Screws A
(XTB4 i12GFJK)
∏2 Bases
(RYK1637-K)
[BTT270]
∏5 Speaker cables
(REEX1266A: RED)
(REEX1267A: WHITE)
(REEX1268: GREEN)
(REEX1269: GRAY)
(REEX1270: BLUE)
Assembling the speakers
2
2
1
1
Tighten 
securely.
Insert the wire 
fully.
r : White
s : Blue line
Push!
Leave about 80 mm (3 
5/32q) Tighten securely.Screw A
Press into the groove.
Screw B Pull the cable 
straight along 
the line and 
slide into the 
groove.
Back of the base
VQT3D27~Body_mst.fm  10 ページ  ２０１１年１月６日　木曜日　午後１時３３分