Panasonic Bluray Disc Home Theater Sound System Sc Btt750 Operating Instructions

Getting started 
11
VQT2W18
ASpeaker cable sticker  (supplied)
B Connector
Be sure to match the number on each sticker with the 
connector color.
	≥ Be careful not to cross (short-circuit) or reverse the polarity of the 
speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify 
the type of speaker with the label on the rear of the speaker before 
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place...

12
VQT2W18
STEP 2 : Positioning
How you set up your speakers can affect the bass and the sound field.
Setup example
Place the front, center and surround speakers at 
approximately the same distance from the seating position.
The angles in the diagram are approximate.
	≥Keep your speakers at least 10 mm (13/32z) away from the system for 
proper ventilation.
A Center speaker
≥Put on a rack or shelf not to interfere with the TVs 
various sensors (ambient light, etc.). Vibration caused by 
the speaker can...

Getting started 
13
VQT2W18
STEP 3: Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC power supply cord until all other connections are complete.
Connect to the terminals of the same color.
Use outdoor antenna if FM radio reception is poor.
Speaker cable connection
-
+
5 2
1366FRONTCENTER
SUBWOOFERRL4
33SURROUNDRL
+
6

 


Main unit
6
PURPLE Subwoofer
5 GREEN Center speaker
2 RED Front speaker (Rch) 
1 WHITE Front speaker...

14
VQT2W18
≥The basic connection is shown in the included Easy Setting Gui de, however, there are more connection examples to optimize 
your system setting.
≥ This system supports the PCM and the Dolby Digital bitstream i nput audio. However, for example the system does not support 
the DTS bitstream input audio.
	≥ Do not make the video connections through the VCR.
Due to copy guard protection, the pi cture may not be displayed properly.
≥ Turn off all equipment before connection.
∫ OPTICAL IN
≥After...

Getting started 
15
VQT2W18
≥It is possible to playback 3D videos by c onnecting this unit with a 3D compatible TV.
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audi o signal from the TV without connecting any other audio cables. Be  sure 
to connect to the TV’s ARC compatible terminal.
≥ Select “ARC” as the audio input source ( >22).
≥ Refer to the operating instructions of the TV for the settings to output digital...

16
VQT2W18
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated  (> 20)
≥ You can enjoy BD-Live ( >26)
≥ You can enjoy VIERA CAST ( >33) For details about connection method, refer to the instructions 
supplied with the connected equipment.
Connection to a broadband network
∫
Using LAN (ethernet) cable ∫[BTT750] Using supplied Wireless LAN 
Adaptor
∫
[BTT350]  Using optional Wireless LAN 
Adaptor (DY-WL10)
A LAN Cable (not supplied)
B Broadband router,...

Getting started 
17
VQT2W18
[BTT750] Precautions of Wireless LAN AdaptorThe following limits are in place regarding the usage of this device. You must be aware 
of these limits before using this device.
Panasonic will in no way be responsible for any incidental damage which may arise due to 
a failure to obey these limits, or to any condition of use or disuse of this device.
≥Do not use this device to connect to any wireless network for which 
you do not have usage rights.
During automatic searches in a...

18
VQT2W18
STEP 4: AC power supply cord connection
AAC power supply cord  (supplied)
B To a household AC outlet
≥ Connect only after all other connections are complete.
≥ The main unit consumes a small amount of AC power, even when it  is turned off (When the “Quick Start” setting is “Off”: approx. 
0.05 W). In the interest of power conservation, if you will not  be using this unit for a long time, unplug it from the household  AC 
outlet.
STEP 5: Easy setup
The Easy setup assists you to make necessary...

Getting started 
19
VQT2W18
1Select “Wired” or “Wireless” and press 
[OK].
If “Wireless LAN Adaptor is not connected.” is displayed, check 
that the Wireless LAN Adaptor is fully inserted. Alternatively, 
disconnect and reconnect it. If there is still no change in the 
display, consult your dealer.
2Follow the on-screen instructions and 
make the settings with [3,4,2, 1] and 
press [OK].
For wireless LAN connection:
If you are using a Wireless router (Access point) that supports 
WPS, you can easily...

20
VQT2W18
Network Easy Setting (Internet Connection Check)
	≥Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in 
the Setup menu. ( >39)
≥ You can redo these settings individually using “Network Settings”. ( >39)
≥ Do not use this device to connect to any wireless network for which 
you do not have usage rights.
During automatic seaches in a wireless network environment, wireless 
networks (SSID*) for which you do not have...