Panasonic Bluray Disc Home Theater Sound System Sc Btt405 Owners Manual

							31
Advanced operations
VQT5F60
¾Screen Saver Function
This is to prevent image retention on the 
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and 
there is no operation for 10 minutes or more, 
the screen switches to HOME menu 
automatically.
≥ While playing and pausing, etc., this function 
is not available.
¾Status Messages
Choose whether to show status messages 
automatically.
¾ HDMI CEC
Set to use “HDMI CEC” function when 
connected via HDMI cable to a device that 
supports “HDMI CEC”.
≥ Select “Off” when you do not want to use 
“HDMI CEC”.
¾Power Off Link
Select the desired power off link setting of this 
unit for “HDMI CEC” operation ( >22). (This 
works depending on the settings of the 
connected “HDMI CEC” compatible equipment.) Video/Audio
When the TV is turned off, this unit will turn off 
automatically.
Video
When playing back audio only content, the 
unit will not turn off automatically.
∫ Unit Settings
Press [OK] to show the following settings:
¾ Mixed Data Disc Option
Select the playback contents on discs with both 
data files and Video.
≥ If “MP3/JPEG/MKV” is selected, data file can 
be played back.
≥ If “BDAV/AVCHD” is selected, BDAV and 
AVCHD can be played back.
¾Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is set to bright 
and only dimmed during playback.
¾Edit User Information
Change the user information registered in the 
HOME menu.
∫ Start-up Banner
Select whether to display the banner after turning 
on this unit. ( >16)
∫ Bluetooth Standby Mode
The unit turns on automatically from standby 
mode when you connect a registered Bluetooth
® 
device.
SC-BTT466&465&405P-VQT5F60_mst.book  31 ページ  ２０１４年１月１５日　水曜日　午後５時３６分 
						

							32VQT5F60
∫Quick Start
Speed of start up from standby mode is 
increased.
≥ When set to “On”, the internal control unit will be 
powered and the idle power consumption will 
increase so compared to when set to “Off”.
∫ Firmware Update ( >14)
Press [OK] to show the following settings:
¾ Automatic Update Check
When this equipment remains connected to the 
Internet, it will check for the latest firmware 
version when it is turned on and you can update 
it if necessary.
¾ Update Now
You can update the firmware manually if a 
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
¾ License
Information about the software used by this unit 
is displayed.
¾ Firmware Version Information
Display firmware version of this unit and 
wireless LAN module.
∫ Restore Default Settings
This returns all values in the Setup menu and the 
Option menu to the default settings, except for 
some settings of network, ratings, on-screen 
language, etc.
SC-BTT466&465&405P-VQT5F60_mst.book  32 ページ  ２０１４年１月１５日　水曜日　午後５時３６分 
						

							33
Advanced operations
VQT5F60
Speaker installation option
Consult a qualified building contractor when 
attaching the speakers to a wall. Improper 
attachment may result in damage to the wall and 
speakers and personal injury.
You can attach all of the speakers (except 
subwoofer) to a wall.
≥The wall or pillar on which the speakers are to 
be attached should be capable of supporting 
10 k g (22 lbs) per screw.
1Drive a screw (not supplied) into the wall.
AAt least 30 mm 
(1 
3/16q)
B ‰ 4.0 mm (5/32q)
C ‰ 7.0 mm to 
‰  9.4 mm 
(
9/32q  to 3/8q)
D Wall or pillar
E 5.5 mm to 7.5 mm 
(
7/32q to 5/16q)
2Fit the speaker securely onto the screw(s) 
with the hole(s).
Use the measurements indicated below.
≥ Leave at least 20 mm (
25/32q) of space above the 
speaker and 10 mm (13/32q) on each side to 
allow enough space for fitting the speaker.
CENTER
A 14 mm 
(
9/16q)
B 65 mm 
(2 
9/16q)
C 175 mm 
(6 29/32q) [BTT466]
 [BTT465]  FRONT
Attach to a wall without the base and the stand.
≥ Before using the speaker cable, remove it from 
the stand by pulling it out.
D 45 mm 
(1 25/32q)
E53 mm 
(2 3/32q)
F266 mm 
(10 1/2q)
≥Reattaching the speaker cable to the stand
[BTT466]  [BTT465]  SURROUND
[BTT405]  FRONT, SURROUND
G 42 mm 
(1 21/32q)
H45 mm (1 25/32q)
Attaching to a wall
e.g., Surround speaker
DO NOTDO
≥In this position, the 
speaker will likely fall if 
moved to the left or right.≥Move the speaker so 
that the screw is in this 
position.
Screwing positions on the 
wall

 







Straighten the cable and run through the stand. 
Pull out the cable through the hole.
160 mm (6 5/16q)
\b
SC-BTT466&465&405P-VQT5F60_mst.book  33 ページ  ２０１４年３月２４日　月曜日　午前１１時３２分 
						

							34VQT5F60
Secure the speaker.
Using the tie down area on the rear of the speaker 
and a cord (not supplied), secure the speaker to a 
wall anchor (not supplied) permanently attached 
to the wall.
1Thread a cord to the speaker.
≥ Use a cord of less than  ‰ 2.0 mm (
3/32q), 
which is capable of supporting over 10 k g 
(22 lbs).
e.g.,  [BTT466]  [BTT465]  Front speaker
A Cord (not supplied)
2Thread a cord from the wall to the speaker 
and tie tightly.
BWall anchor (not supplied)
C Wall or pillar
D Approx.150 mm (6 q)
E Approx.100 mm (4 q)
To prevent tipping/falling of 
the speakers






When mounted on a wall
When placed on the floor
P-VQT5F60~Body_mst.fm  34 ページ  ２０１４年１月２０日　月曜日　午後６時２５分 
						

							35
Advanced operations
Reference
VQT5F60
ReferenceTroubleshooting guide
Before requesting service, please perform the 
following steps.
∫Unit does not respond to remote 
control or unit’s buttons.
Disconnect AC power supply cord, wait 1 minute, 
then reconnect AC power supply cord.
The following do not indicate a problem with 
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫Cannot eject disc.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.
j“00rEt” is displayed on the unit’s display.
3 Press [ 1] (right) repeatedly on the remote 
control until “06FtO” is displayed on the unit’s 
display.
4 Press [OK]. To return to the factory defaults.
¾
Select “Yes” in “Restore Default Settings” in 
the Setup menu. ( >32)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.
j“00rEt” is displayed on the unit’s display.
3 Press [ 1] (right) repeatedly on the remote 
control until “08FIn” is displayed on the unit’s 
display.
4 Press and hold [OK] for at least 5 seconds.
The remote control does not work properly.
¾Change the batteries in the remote control. 
(>9)
¾ Depending on the condition of the unit, 
[SELECTOR] and [ ] may not respond. 
Display the HOME menu and try again.
The TV tuner mode is not displayed when the 
TV is turned on.
¾
This phenomenon may occur, depending on the 
TV setting, when “Quick Start” is set to “On”.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory 
defaults.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.
j“00rEt” is displayed on the unit’s display.
3 Press [ 1] (right) repeatedly on the remote 
control until “03 VL” is displayed on the unit’s 
display.
4 Press [OK].
Do you have the latest firmware installed?
Panasonic is constantly  improving the unit’s 
firmware to ensure that our customers are 
enjoying the latest technology. (> 14)
4
Make the following checks and visit our 
website for more information.
www.panasonic.com/support
Enter the model number. 4
Or visit our website to find a service center.
You can find a service center near you easily 
on our website.
Other support information :
“Customer Services Directory (United States 
and Puerto Rico)” ( >47).
General operation
SC-BTT466&465&405P-VQT5F60_mst.book  35 ページ  ２０１４年１月１７日　金曜日　午後５時５６分 
						

							36VQT5F60
The TV screen turns black.
¾When “24p Output” is set to “On”, HDMI 
authentication takes place and a black screen 
is displayed.
This unit does not recognize the USB 
connection correctly.
¾Disconnect and re-connect the USB cable. If 
it still does not recognize the connection, turn 
this unit off and on again.
¾ USB devices may not be recognized by this 
unit when connected using the following :
ja USB hub
j a USB extension cable other than the 
supplied with the Wireless LAN Adaptor 
DY-WL5 (optional)
¾ If you connect USB HDD to this unit, use the 
USB cable that is supplied with the HDD.
The unit switches to standby mode.
¾This unit will automatically turn to standby 
mode after 30 minutes if it is inactive. ( >16)
¾
When the time set for the sleep timer has 
passed, the main unit will be turned off. (
>9)¾One of the unit’s safety devices is activated. 
Press [
Í/I] on the main unit to turn the unit on.
The images from this unit do not appear on 
the TV.
Picture is distorted.
Jittering occurs.
¾ An incorrect resolution is selected in “HDMI 
Resolution”. Reset the setting as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.
j“00rEt” is displayed on the unit’s display.
3 Press [ 1] (right) repeatedly on the remote 
control until “04PrG” is displayed on the unit’s 
display.
4 Press and hold [OK] for at least 5 seconds.
Set the item again. ( >27)
j When Dolby Digital Plus, Dolby TrueHD, 
and DTS-HD
® audio are not output properly, 
select “Yes” in “Restore Default Settings” 
(> 32) and make proper settings.
¾ When “3D BD-Video Playback” in the Setup 
menu is set to “Auto”, images may not be 
output depending on the connection method. 
After removing the disc from this unit, select 
“Set before play” in the Setup menu, and 
select “2D Playback” in the setup screen 
displayed when playing 3D discs. ( >28)
¾ If irregular coloring occurs on your TV, turn 
the TV off for about 30 minutes.
If it persists, move the speakers further away 
from the TV.
Picture
SC-BTT466&465&405P-VQT5F60_mst.book  36 ページ  ２０１４年１月１５日　水曜日　午後５時３６分 
						

							37
Reference
VQT5F60
Video is not output in high-definition.
¾Confirm that “HDMI Resolution” in the Setup 
menu is set properly. ( >27)
3D video is not output.
¾ Connect to a full high-definition TV.
¾ Are the settings on this unit and the TV 
correct? ( >19)
¾ Depending on the connected TV, the video 
being played back might switch to 2D video 
due to changes in resolution etc. Check the 
3D setting on the TV.
¾ Check that proper HDMI video input is 
selected on the TV.
3D video is not output correctly as 2D.
¾Select “Set before play” in the Setup menu, 
and select “2D Playback” in the setup screen 
displayed when playing 3D discs. ( >28, “3D 
BD-Video Playback”)
¾ Discs that have recorded titles with Side by 
side (2 screen structure) and that can be 
enjoyed in 3D are played back in accordance 
with the settings of the TV.
Closed captions are not displayed.
¾Confirm that the source content supports CC.
¾ Confirm the “Closed Caption Display” is set to 
“On”.  ( > 25, 29)
¾ Change the “Closed Caption Type” setting. 
(>25, 29)
¾ Confirm the “Analog CC” or “Digital CC” is set 
properly  (> 25, 29).
A black band is displayed around the edge of 
the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly. (>30)¾ Adjust the aspect setting on the TV. No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
¾
Check connections to speakers and other 
equipment.
¾ Ensure the speaker settings for your 
speakers are correct. ( >28)
¾ To output audio from a device connected with 
an HDMI cable, set “HDMI Audio Output” to 
“On” in the Setup menu. ( >28)
¾ When “BD-Video Secondary Audio” is set to 
“On”, Dolby TrueHD, Dolby Digital Plus, 
DTS-HD Master Audio
TM and DTS-HD High 
Resolution AudioTM are output as DTS Digital 
SurroundTM.
¾ Depending on the connected equipment, the 
sound may be distorted if this unit is 
connected with an HDMI cable.
¾ The multi-channel audio from a device 
connected to the TV is not output in it’s 
original multi-channel form.
jIf the device has an optical audio output 
terminal, connect the device to this unit’s 
DIGITAL AUDIO IN terminal. ( >11 )
No surround sound.
¾ Press [SOUND] to select a surround effect. 
(>26)
Cannot switch audio.
¾ When audio is output from the HDMI AV OUT 
terminal, set “Dolby D/Dolby D +/Dolby 
TrueHD” or “DTS/DTS-HD” to “PCM”. ( >28)
No sound from the TV.
¾ Press [SELECTOR] to select the 
corresponding source. ( >15)
¾ Check whether the HDMI terminal on the TV 
is labeled “HDMI (ARC)”. If not labeled in this 
way, connect using the HDMI cable in 
combination with an optical digital audio 
cable.
¾ If there is no sound from the equipment 
connected to this unit’s DIGITAL AUDIO IN 
terminal, please make sure that the optical 
audio output of the equipment is set to PCM.
Audio
SC-BTT466&465&405P-VQT5F60_mst.book  37 ページ  ２０１４年１月１５日　水曜日　午後５時３６分 
						

							38VQT5F60
Disc cannot be played.
¾The disc is dirty. ( >6)
¾ The disc is not finalized. ( >8)
¾ Confirm the “Mixed Data Disc Option” is set 
properly. ( >31)
Still pictures (JPEG) do not play back 
normally.
¾ The images that were edited on the PC, such 
as Progressive JPEG, etc., may not be played 
back.
I can’t play back BD-Live.
¾Confirm that this unit is connected to the 
broadband Internet. ( >12)
¾ Confirm the “BD-Live Internet Access” 
settings. ( >30)
¾ Confirm a USB device is connected to the 
USB port. ( >15)
¾ Connect this unit to the network by a wired 
connection.
Alternative soundtrack and subtitles cannot 
be selected.
¾The languages are not recorded on the disc.
¾ You may not be able to use the Option menu 
to change the soundtrack and subtitles on 
some discs. Use the disc’s menus to make 
changes. ( >19)
Pairing cannot be done.
¾ Check the Bluetooth® device condition.
The device cannot be connected.
¾Try pairing the device again.
¾ This system might be connected to a different 
device. Disconnect the other device and try 
pairing the device again.
The device is connected but audio cannot be 
heard through this system.
¾For some built-in Bluetooth
® devices, you 
have to set the audio output to “Panasonic 
BTT” manually. Read the owner’s manual for 
the device for details.
The sound is interrupted.
¾ The communication range is 10 m (33 ft.). 
Bring the Bluetooth
® device closer to the main 
unit.
¾ Other devices that use the 2.4 GHz frequency 
band (wireless router, microwaves, cordless 
phones, etc.) are interfering. Bring the 
Bluetooth
® device closer to the main unit and 
distance it from the other devices.
The One-Touch Connection (NFC feature) is 
not working.
¾ Turn on the NFC feature of the device.
¾ Depending on the condition of the unit, the 
NFC touch area may not respond. Display the 
HOME menu and try again.
¾ Depending on the device, the NFC feature 
may not function correctly. In such cases, 
start up the Bluetooth
® feature of the device to 
set up a connection with it.
PlaybackBluetooth®
SC-BTT466&465&405P-VQT5F60_mst.book  38 ページ  ２０１４年１月１７日　金曜日　午後５時５６分 
						

							39
Reference
VQT5F60
Distorted sound or noise is heard.
¾Adjust the position of the antenna.
A beat sound is heard.
¾Try to keep a certain amount of distance 
between the antenna and the TV.
Stations cannot be selected.
¾Press and hold [SELECTOR].
After a few seconds the display changes to show 
the current lowest frequency (87.9 MHz). Continue 
to hold the button down. The lowest frequency 
changes (87.5 MHz) and the step is changed.
Noise is excessive.
¾Change the audio to be output as monaural.
Press [AUDIO] to select “MnO”.
The sound becomes monaural.
≥To cancel, press the button again or change 
the frequency.
In normal circumstances, select “AUtO StErEO”.
I can’t connect to the network.
¾ Confirm the network connection and settings. 
(>12, 13, 29)
¾ There may be interference that prevents the 
unit from detecting your home network. Place 
the unit and the wireless router closer to each 
other. This unit may be able to detect your 
network name ( >14, “SSID”).
¾ Check the owner’s manual for each device 
and connect accordingly.
When using wireless LAN connection, video 
frames are dropped during playback.
¾Higher transfer rate router such as 802.11n 
(2.4 GHz) wireless router may solve the 
problem. If you use 802.11n (2.4 GHz) 
wireless router, it is necessary to set the 
encryption type to “AES”.
Simultaneous use with a microwave, cordless 
telephone etc. at 2.4 GHz may result in 
connection interruptions or other problems.
¾ On the “Wireless Settings” screen (> 29), the 
continuous lighting of at least 4 “Reception” 
indicators is the target for a stable connection. 
If 3 or fewer indicators are lit or the 
connection is being interrupted, change the 
position or angle of your wireless router and 
see if the connection state improves. If there 
is no improvement, connect to a wired 
network and perform the “Easy Network 
Setting” ( >13) again.
Radio
MONO
AUTO STEREO
Network
SC-BTT466&465&405P-VQT5F60_mst.book  39 ページ  ２０１４年１月１５日　水曜日　午後５時３６分 
						

							40VQT5F60
Cannot play.
¾You inserted an incompatible disc (Discs 
recorded in PAL video, etc.).
Cannot display on this unit.
¾You tried to play a non-compatible image.
¾ Re-insert the media.
No disc inserted.
¾The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾The “IP Address” in “IP Address/DNS 
Settings” is “---. ---. ---. ---”. Set the “IP 
Address”, “Subnet Mask”, and “Default 
Gateway”. (Select the automatic address 
acquisition if necessary.)
The current wireless network security setting 
is weak. It is recommended to change to a 
stronger security setting.
¾Set a stronger network security level referring 
to the wireless router owner’s manual.
U59
¾Temperature of this unit is hot and the unit 
switches to standby for safety reasons. Wait 
for about 30 minutes until the message 
disappears.
Install or place this unit with good ventilation.
H or F 
(“  ” stands for a number.)
¾ Check and correct the speaker cable 
connections.
¾ There is something unusual.
¾ Check the unit using the troubleshooting 
guide. If the service number remains 
displayed, do the following.
If the service number remains displayed despite 
doing the above, request service from the dealer. 
Inform the dealer of the service number when 
requesting service.
Messages on the screenMessages on the unit’s 
display
1 Disconnect the plug from the AC outlet, 
wait a few seconds, then reconnect it.
2 Press [ Í/I] to turn the unit on.
SC-BTT466&465&405P-VQT5F60_mst.book  40 ページ  ２０１４年１月１５日　水曜日　午後５時３６分